/mcpMCAST-SEND: Inband Transmit Succeeded for IGMP Leave Message on port 3/1 vlanNo 3 MCAST-TIMER:IGMPLeaveTimer:delete leave timer The subnet configuration is now back at the beginning, its state in Step 1. The multicast entry has disappeared from the show cam static command output. To finish, view an example of the show igmp static command output, as shown below. Switch_B (enable) show igmp stat 2 IGMP enabled IGMP statistics for vlan 2: Total valid pkts rcvd: 329 Total invalid pkts recvd 0 General Queries recvd 82 Group Specific Queries recvd 0 MAC-Based General Queries recvd 0 Leaves recvd 0 Reports recvd 82 Queries Xmitted 0 GS Queries Xmitted 0 Reports Xmitted 0 Leaves Xmitted 0 Failures to add GDA to EARL 0 Topology Notifications rcvd 0 Switch_B (enable) show igmp stat 3 IGMP enabled IGMP statistics for vlan 3: Total valid pkts rcvd: 360 Total invalid pkts recvd 0 General Queries recvd 93 Group Specific Queries recvd 6 MAC-Based General Queries recvd 0 Leaves recvd 11 Reports recvd 64 Queries Xmitted 0 GS Queries Xmitted 14 Reports Xmitted 0 Leaves Xmitted 10 Failures to add GDA to EARL 0 Topology Notifications rcvd 1 Switch_B (enable) Related Information Multicast Catalyst Switches Support Matrix G IP Multicast Support Page G Cisco Technology Support G Cisco Product Support G Technical Support & Documentation - Cisco Systems G