McDewey

Remedy: Check the Localization feature support and de Rule (RI-263): Type: Active (Insert) Rule Name: Set QSIG on Device Description: When a device is inserted, the QSIG setting fo follows: For trunks other than Inter-cluster tru trunk is treated as Mixed-Non-QSIG. Digital Ac considered QSIG, H.323 Gateways are conside Digital Access PRI with a non-QSIG protocol) a Route Lists are considered Mixed-Non-QSIG. F Test Condition: On Insert into Device Rule (RI-297): Type: Validation (Insert/Update) Rule Name: SRTP and Outbound Faststart Conflict Description: The SRTPAllowed and EnableOutboundFastSt exclusive - only one may be true at any given Test Condition: IF (Device.SRTPAllowed = 't') AND (H323Devic exception Error Message: SRTP and Outbound FastStart cannot be enab Remedy: Disable either SRTP or Outbound FastStart an Rule (RI-316): Type: Active (Insert/Update) Rule Name: Prevent applying secure profile where not sup Description: on I/U of Device Test Condition: Only endpoints on gateways with secure mod marked for secure mode. Further, all endpoin either all operating in secure mode or all in n Rule (RI-320): Type: Validation (Insert/Update) Rule Name: Device Restriction for SIP Dial Rules Description: SIP Dial Rules for 7905/7912 may only be asso other phones must use 7940/7960/TMP dial ru Test Condition: ON INSERT/UPDATE IN Device IF (DialRules.tk (7905, 7912) OR DialRules.tkDialPattern == 1 A throw exception Error Message: Cannot assign Dial Rules of this type to the spe mismatched). Remedy: Check the dial rule and device type to make su 7905 device). Rule (RI-338): Type: Validation (Insert) Rule Name: One default profile per model