McDewey

Error Message: The device name format is not valid or contai Remedy: Check the name to make sure it is valid for sp Rule (RI-64): Type: Validation (Insert/Update) Rule Name: Route List Enabled Restriction Description: Only Route List device may set the RouteListE Test Condition: IF (@Device.RouteListEnabled = TRUE) AND (@ Error Message: Route List Enabled can be true only for Route Remedy: Check device type and try again. Rule (RI-67): Type: Active (Insert) This field is modified by this rule. Rule Name: Set tkModel on Insert Description: The model of a device is determined by the se device's model is set at insert and cannot be m Test Condition: SET Device.tkModel = (SELECT tkModel FROM @Device.tkProduct) Rule (RI-67): Type: Active (Insert) Rule Name: Set tkModel on Insert Description: The model of a device is determined by the se device's model is set at insert and cannot be m Test Condition: SET Device.tkModel = (SELECT tkModel FROM @Device.tkProduct) Rule (RI-223): Type: Active (Insert) Rule Name: Add a VGC Gateway to MGCP on Device updat Description: On Insert only Test Condition: ? Rule (RI-263): Type: Active (Insert) Rule Name: Set QSIG on Device Description: When a device is inserted, the QSIG setting fo follows: For trunks other than Inter-cluster tru trunk is treated as Mixed-Non-QSIG. Digital Ac considered QSIG, H.323 Gateways are conside Digital Access PRI with a non-QSIG protocol) a Route Lists are considered Mixed-Non-QSIG. F On Insert into Device