McDewey

Description: The valid Protocol Side settings for a device ar ProductCapabilities table for that device type Only gateways and trunks are configured as N Test Condition: @Device.tkProtocolSide IN (SELECT EnumValu (tkProductConfig = 18) AND (tkProduct = @De Error Message: The specified Protcol Side is not valid for this Remedy: Check the Protocol Side support and device ty 2.3.95.142 tkqsig (FI-1410) Type: enum (Not Modifiable) Default Value: 4 Rule (RI-263): Type: Active (Insert) This field is modified by this rule. Rule Name: Set QSIG on Device Description: When a device is inserted, the QSIG setting fo follows: For trunks other than Inter-cluster tru trunk is treated as Mixed-Non-QSIG. Digital Ac considered QSIG, H.323 Gateways are conside Digital Access PRI with a non-QSIG protocol) a Route Lists are considered Mixed-Non-QSIG. F Test Condition: On Insert into Device Rule (RI-263): Type: Active (Insert) Rule Name: Set QSIG on Device Description: When a device is inserted, the QSIG setting fo follows: For trunks other than Inter-cluster tru trunk is treated as Mixed-Non-QSIG. Digital Ac considered QSIG, H.323 Gateways are conside Digital Access PRI with a non-QSIG protocol) a Route Lists are considered Mixed-Non-QSIG. F Test Condition: On Insert into Device 2.3.95.143 tkreset (FI-3111) Type: enum Default Value: 2 Remarks: Set by DeviceReset stored procedure. 2.3.95.144 tkringsetting_dnd (FI-3288) Type: enum (Null OK) Default Value: NULL