McDewey

Rule (RI-82): Type: Validation (Insert/Update) Rule Name: Busy Trigger and No Call Waiting Description: Busy Trigger must be set to 1 if there is no r to indicate that the device supports Call Wai = SUPPORTS_FEATURE_CALL_WAITING) (6) Test Condition: IF (SELECT COUNT(*) FROM ProductSuppor tkProduct = @Device.tkProduct) = 0 AND (De exception Error Message: Busy Trigger cannot be greater than 1 becau Waiting Remedy: Check the Call Waiting support and device ty Call Waiting, Busy Trigger must be set to 1. Rule (RI-94): Type: Validation (Insert/Update) Rule Name: Maximum MaxCalls Per Device/Line Description: The upper limit for Maximum Calls for a Lin calculated on a per-line basis as follows: If th (ProductSupportsFeature.tkSupportsFeature SUPPORTS_FEATURE_MULTIPLE_CALL_DISP ProductSupportsFeature. The parameter ind Calls : Default Busy Trigger. The current valu minus the sum of MaxCalls configured for a Multiple Call Display is not supported, MaxC Test Condition: ? Rule (RI-94): Type: Validation (Insert/Update) This field is modified by this rule. Rule Name: Maximum MaxCalls Per Device/Line Description: The upper limit for Maximum Calls for a Lin calculated on a per-line basis as follows: If th (ProductSupportsFeature.tkSupportsFeature SUPPORTS_FEATURE_MULTIPLE_CALL_DISP ProductSupportsFeature. The parameter ind Calls : Default Busy Trigger. The current valu minus the sum of MaxCalls configured for a Multiple Call Display is not supported, MaxC Test Condition: ? 2.3.107.2 callinfodisplaymask (FI-1351) Type: long Default Value: 9