McDewey

Test Condition: ON INSERT/UPDATE/DELETE IN DigitalAcces tkqsig on device where device.pkid = digital Rule (RI-40): Type: Validation (Update) Rule Name: QSIG Protocol Change Restriction Description: If a Digital Access PRI gateway is a member cannot be changed from a non-QSIG protoco Protocol. Test Condition: SELECT COUNT(*) FROM RouteGroupDevice Device.tkDeviceProtocol = 1 Error Message: Cannot change a QSIG device to a non-QSIG Route Group. Remedy: Remove the device from the Route Group to Protocol. Rule (RI-583): Type: Validation (Insert/Update) Rule Name: DigitalAccessPRI.tkASN1RoseOidEncoding a Restriction Description: If tkPriProtocol is not enabled for qsigthen t DigitalAccessPRI table should not be allowed Test Condition: ON INSERT or UPDATE in DigitalAccessPRI: S typepriprotocol where enum = new.tkpripro exception END IF; Error Message: Cannot modify the value since qsig is not en Remedy: Enable the QSIG and change the value 2.3.132.47 tkqsigvariant (FI-3768) Type: enum Default Value: 0 Rule (RI-583): Type: Validation (Insert/Update) Rule Name: DigitalAccessPRI.tkASN1RoseOidEncoding a Restriction Description: If tkPriProtocol is not enabled for qsigthen t DigitalAccessPRI table should not be allowed Test Condition: ON INSERT or UPDATE in DigitalAccessPRI: S typepriprotocol where enum = new.tkpripro exception END IF; Error Message: Cannot modify the value since qsig is not en Remedy: Enable the QSIG and change the value 2.3.132.48 tkstatus_routeclasssignalingenabled (FI-3935)