McDewey

Rule (RI-308): Type: Active (Insert/Update) Rule Name: Set QSIG on Device when Tunneled Protocol Description: When the H323Device.tkTunneledProtocol v on the referenced device Test Condition: IF H323.tkTunneledProtocol = QSIG THEN se H323 or MIXED NON-QSIG for Intercluster T Rule (RI-584): Type: Validation (Insert/Update) Rule Name: H323Device.tkASN1RoseOidEncoding and H Description: If tkTunneledProtocol is not enabled for qsig in the H323Device table should not be allow Test Condition: ON INSERT or UPDATE in H323Device: SELE TunneledProtocol where enum = new_tkTun throw exception END IF; Error Message: Cannot modify the value since QSIG is not en Remedy: Enable the QSIG and change the value 2.3.219.36 useclientconfiguration (FI-1232) Type: bool Default Value: FALSE 2.3.219.37 usedpconnectedpartytransformationcss (FI-21077) Type: bool Default Value: TRUE Remarks: If set to true fkCallingSearchSpace_CntdPNTransform settin setting on H323Device including NULL to mean no Calling S 2.3.219.38 zone (FI-1099) Type: string [50] Default Value: EMPTY Validation: ^[a-zA-Z 0-9._-]{0,50}$ Uniqueness: No multicolumn uniqueness constraints 2.3.220 h323trunkdestination (TI-572) Description: To store the details of H323 Trunk destination Fields: 2.3.220.1 address (FI-5884) Type: string [255] (Indexed) Migration Source: H323Device.EndPointAddress Remarks: IP address or host name for this EndPoint instance of the co Rule (RI-487): Type: Validation (Insert/Update)