McDewey

Check Constraint: (SIPSecuredPort >= 1024) AND (SIPSecuredPort <= 49151) Remarks: Cisco CallManager uses this port for secured communicatio protocol. Accept the default port of 5061 unless this port is a entries are unique. Valid port numbers range from 1024 to 4 Rule (RI-332): Type: Active (Insert/Update) Rule Name: Prevent port conflict between CCMs and SIP Description: on I/U of SecurityProfile and CCM Test Condition: prevent bad port combinations 2.3.46.15 tkreset (FI-3130) Type: enum Default Value: 2 Remarks: Set by DeviceReset stored procedure. Uniqueness: No multicolumn uniqueness constraints Constraints: Rule (RFI-125): Type: Inter-field Condition and Constraint Constraint: ( EthernetPhonePort NOT IN ( MGCPKeepAliv ( MGCPKeepAlivePort NOT IN ( MGCPListenP Remarks: Ports on an IP based system node must be un 2.3.47 callmanagergroup (TI-6) Description: Used for redundancy and rehoming of devices Fields: 2.3.47.1 name (FI-170) Type: string [50] (Unique) Validation: ^[a-zA-Z 0-9._-]{1,50}$ Migration Source: Description, create one if none exist, make default Remarks: Name of the CallManager group. 2.3.47.2 pkid (FI-169) Type: guid (Unique, Indexed, Not Modifiable) Default Value: newid() Migration Source: Generated Remarks: Unique ID to identify a record. Rule (RI-9): Type: Validation (Insert) Rule Name: Set CallManager Group TFTP Default Description: Only one CallManagerGroup can be the defa the default, the existing default must be upd Set CallManagerGroup.TFTPDefault = 1 on In