McDewey

Scenario 3 IP phones (Basic): Multi-Clusters Gateway preferred with press key invoke recording Events and Call Info Setup and Action Step 3- Check A1 and B1 CiscoAddres.SELECTIVE_RECORDING Step 6-Check A1 get CiscoTermConnRecordingStartedEv and CiscoTermConnRecordingTargetInfoEv. Check A1 TermConnection.getCiscoRecorderInfo(): .getRecordingType() = CALL_RECORDING_TYPE_USER_INITIATED_FROM_DEVICE .getTerminalName() = central recorder device name .getAddress() = Recording profile (DN 2000) .getMediaForkingDeviceType() = CALL_RECORDING_MEDIA_FORKING_DEVICE_TYPE_GW .getMediaForkingDeviceName() = SIP trunk device name – SIP GW .getProtocolReferenceGUID() = .getMediaForkingClusterID() = name of cluster1 Cluster 1: • “Allow trunk use GW recording” is enabled • Central recorder: 2000 Cluster 2: • Phone B (SEP723F) has line B1:4008 • GW preferred • selective recording enabled • recorder B:2000 Cluster 3: • Branch recorder: 2000 • Phone A (SEPDB17) has line A1 2303 configured as: • GW preferred • selective recording enabled • recording profile:rec_profile1: 2000 1. Open provider Prov1, Prov2, Prov3 2. Observe A1 in Prov3, B1 in Prov2 3. Verify A1 have recording type SELECTIVE_RECORDING 4. A1 calls B1 ( 2303 calls 1721714008) 5. B1 answers 6. Press recording key on A 7. A1 disconnects B1 Cisco Unified JTAPI Developers Guide for Cisco Unified Communications Manager, Release 15 and SUs 1398 Message Sequence Charts Message Sequence Charts