McDewey

Scenario 19 FI: Conference- devRD (leaf), RDD (cluster2), A (SME) and B (SME) - RD silent recording and A conference Events and Call Info Setup and Action Step 5- Check recording started on RD1. Check RD1 get CiscoTermConnRecordingStartedEv and CiscoTermConnRecordingTargetInfoEv. Check RD1 TermConnection.getCiscoRecorderInfo(): .getRecordingType() = CALL_RECORDING_TYPE_APPLICATION _INITIATED_SILENT .getTerminalName() = central recorder device name .getAddress() = Recording profile (DN 2000) .getMediaForkingDeviceType() = CALL_RECORDING_MEDIA_FORKING_ DEVICE_TYPE_GW .getMediaForkingDeviceName() = SIP trunk device name - SIP GW .getProtocolReferenceGUID() = .getMediaForkingClusterID() = name of cluster1 Step 8- A1 complete conference. A1, B1 and RD1 are in conference. Recording not retriggered on RD1. Step 9- Check RD1 get ExistingCallEvent and CiscoTermConnRecordingTargetInfoEv. Check RD1 TermConnection.getCiscoRecorderInfo(): .getRecordingType() = CALL_RECORDING_TYPE_APPLICATION _INITIATED_SILENT .getTerminalName() = central recorder device name .getAddress() = Recording profile (DN 2000) .getMediaForkingDeviceType() = CALL_RECORDING_MEDIA_FORKING_ DEVICE_TYPE_GW .getMediaForkingDeviceName() = SIP trunk device name - SIP GW .getProtocolReferenceGUID() = .getMediaForkingClusterID() = name of cluster1 Step 10- Check RD1 get CiscoTermConnRecordingEndedEv Cluster 1 (SME): • "Allow trunk use GW recording" is enabled • Central recorder: 2000 Cluster 2: Cluster 3 (leaf): • "Allow trunk use GW recording" is enabled • Branch recorder: 2000 • devRD (CTI_RD3) on cluster 3 has line RD1 (1621) (active remote destination: 1721711681 on cluster2) configured as: • auto recording enabled • GW preferred Remote Destination RDD on cluster 2. • devA (IP10) on cluster 1 has line A1 (2303) configured as: • GW preferred • selective recording enabled • recording profile:rec_profile1: 2000 • devB (SEP334F) on cluster 1 has line B1 (2205) configured as: • GW preferred • selective recording enabled • recording profile:rec_profile1: 2000 1. Open provider Prov1, Prov2, Prov3 2. Observe RD1, RDD1, A1, and B1 in Prov1/Prov2/Prov3 accordingly 3. A1 call RD1 4. Remote destination answer the call 5. Start silent recording on RD1 6. A1 setup conference to B1 7. B1 answer 8. A1 complete conference 9. Close line RD1 and reopen line RD1 10. App stop recording on RD1 11. RD disconnects the call Cisco Unified JTAPI Developers Guide for Cisco Unified Communications Manager, Release 15 and SUs 1419 Message Sequence Charts Message Sequence Charts