McDewey

Events and Call Info Setup and Action .getMediaForkingDeviceName() = SIP trunk device name - SIP GW .getProtocolReferenceGUID() = .getMediaForkingClusterID() = name of cluster1 Step 10- Check RD1 get CiscoTermConnRecordingEndedEv Scenario 23 FI: EM- devRD (leaf), RDD (cluster2), A (SME) - RD auto recording and A EM Login Events and Call Info Setup and Action Step 5- Check auto recording started on RD1. Check RD1 get CiscoTermConnRecordingStartedEv and CiscoTermConnRecordingTargetInfoEv. Check RD1 TermConnection.getCiscoRecorderInfo(): .getRecordingType() = CALL_RECORDING_TYPE_AUTOMATIC .getTerminalName() = central recorder device name .getAddress() = Recording profile (DN 2000) .getMediaForkingDeviceType() = CALL_RECORDING_MEDIA_FORKING_ DEVICE_TYPE_GW .getMediaForkingDeviceName() = SIP trunk device name - SIP GW .getProtocolReferenceGUID() = .getMediaForkingClusterID() = name of cluster1 Step 7- EM logout succeed. Step 7- Check RD1 get CiscoTermConnRecordingEndedEv Cluster 1 (SME): • "Allow trunk use GW recording" is enabled • Central recorder: 2000 Cluster 2: Cluster 3 (leaf): • "Allow trunk use GW recording" is enabled • Branch recorder: 2000 • devRD (CTI_RD3) on cluster 3 has line RD1 (1622) (active remote destination: 1721711681 on cluster2) configured as: • auto recording enabled • GW preferred Remote Destination RDD on cluster 2. • devA (SEPAB21) on cluster 1 has line A1 (9000) configured as: • GW preferred • selective recording enabled • recording profile:rec_profile1: 2000 • EM profile with line E1 (7788) 1. Open provider Prov1, Prov2, Prov3 2. Observe RD1, RDD1, A1, and B1 in Prov1/Prov2/Prov3 accordingly 3. EM login to devA with line E1 4. E1 call RD1 5. Remote destination answer the call 6. E1 disconnect call 7. EM logout Cisco Unified JTAPI Developers Guide for Cisco Unified Communications Manager, Release 15 and SUs 1424 Message Sequence Charts Message Sequence Charts