/mcpScenario 37 FI: Conference- local-devRD (SME), RDD (cluster2), A (SME) and B (SME) - RD selective recording and A conference Events and Call Info Setup and Action Step 5- Check recording started on RD1. Check RD1 get CiscoTermConnRecordingStartedEv and CiscoTermConnRecordingTargetInfoEv. Check RD1 TermConnection.getCiscoRecorderInfo(): .getRecordingType() = CALL_RECORDING_TYPE_USER _INITIATED_FROM_APPLICATION .getTerminalName() = central recorder device name .getAddress() = Recording profile (DN 2000) .getMediaForkingDeviceType() = CALL_RECORDING_MEDIA_FORKING_ DEVICE_TYPE_GW .getMediaForkingDeviceName() = SIP trunk device name - SIP GW .getProtocolReferenceGUID() = .getMediaForkingClusterID() = name of cluster1 Step 8- A1 complete conference. A1, B1 and RD1 are in conference. Recording retriggered on RD1. Check RD1 get CiscoTermConnRecordingEndedEv , CiscoTermConnRecordingStartedEv and CiscoTermConnRecordingTargetInfoEv. Check RD1 TermConnection.getCiscoRecorderInfo(): .getRecordingType() = CALL_RECORDING_TYPE_USER _INITIATED_FROM_APPLICATION .getTerminalName() = central recorder device name .getAddress() = Recording profile (DN 2000) .getMediaForkingDeviceType() = CALL_RECORDING_MEDIA_FORKING_ DEVICE_TYPE_GW .getMediaForkingDeviceName() = SIP trunk device name - SIP GW .getProtocolReferenceGUID() = .getMediaForkingClusterID() = name of cluster1 Step 9- Check RD1 get CiscoTermConnRecordingEndedEv Cluster 1 (SME): • "Allow trunk use GW recording" is enabled • Central recorder: 2000 Cluster 2: Cluster 3 (leaf): • "Allow trunk use GW recording" is enabled • Branch recorder: 2000 • devRD (CTIRD3) on cluster 1 has line RD1 (9008) (active remote destination: 1711681 on cluster2) configured as: • selective recording enabled • GW preferred Remote Destination RDD on cluster 2. • devA (IP10) on cluster 1 has line A1 (2303) configured as: • GW preferred • selective recording enabled • rec_profile1: 2000 • devB (SEP334F) on cluster 1 has line B1 (2205) configured as: • GW preferred • selective recording enabled • rec_profile1: 2000 1. Open provider Prov1, Prov2, Prov3 2. Observe RD1, RDD1, A1, and B1 in Prov1/Prov2/Prov3 accordingly 3. A1 call RD1 4. Remote destination answers, and then A1 answer 5. App start user recording on RD1 6. A1 setup transfer to B1 7. B1 answer 8. A1 complete transfer 9. App stop recording on RD1 10. RD1 disconnects the call Cisco Unified JTAPI Developers Guide for Cisco Unified Communications Manager, Release 15 and SUs 1438 Message Sequence Charts Message Sequence Charts