McDewey

Cluster 1 (SME): Step 4- Check auto recording started on A1. Check A1 get CiscoTermConnRecordingStartedEv and CiscoTermConnRecordingTargetInfoEv. • "Allow trunk use GW recording" is enabled • Central recorder: 2000 Check A1 TermConnection.getCiscoRecorderInfo(): Cluster 2: .getRecordingType() = CALL_RECORDING_TYPE_AUTOMATIC Cluster 3 (leaf): .getTerminalName() = central recorder device name • "Allow trunk use GW recording" is enabled .getAddress() = Recording profile (DN 2000) • Branch recorder: 2000 .getMediaForkingDeviceType() = CALL_RECORDING_MEDIA_FORKING_DEVICE_TYPE_GW • devRD (CTIRD1) on cluster 1 has line RD1 (2303) (active remote destination: 1711623 on cluster2) configured as: .getMediaForkingDeviceName() = SIP trunk device name - SIP GW .getProtocolReferenceGUID() = • selective recording enabled .getMediaForkingClusterID() = name of cluster1 • GW preferred Step 5- A1 put call on hold. Check A1 get CiscoTermConnRecordingEndedEv Step 6- Check auto recording started on C1. Remote Destination RDD on cluster 2. Check C1 get CiscoTermConnRecordingStartedEv and CiscoTermConnRecordingTargetInfoEv. • devA (SEP334F) on cluster 1 has line A1 (2206) configured as: Check C1 TermConnection.getCiscoRecorderInfo(): • GW preferred .getRecordingType() = CALL_RECORDING_TYPE_AUTOMATIC • auto recording enabled .getTerminalName() = central recorder device name • rec_profile1: 2000 .getAddress() = Recording profile (DN 2000) • devC (IP10) on cluster 1 has line C1 (3300) configured as: .getMediaForkingDeviceType() = CALL_RECORDING_MEDIA_FORKING_DEVICE_TYPE_PHONE • GW preferred .getMediaForkingDeviceName() = Device name of C .getProtocolReferenceGUID() = • auto recording enabled .getMediaForkingClusterID() = name of cluster1 • rec_profile1: 2000 Step 7- A1 resume. No CiscoTermConnRecordingFailedEv. • devD (SEP3925) on cluster 1 has line D1 (9002) Step 8- C1 drop. Check C1 get CiscoTermConnRecordingEndedEv 1. Open provider Prov1, Prov2, Prov3 Step 10- Check auto recording started on A1. 2. Observe RD1, RDD1, A1, C1, and D1 in Prov1/Prov2/Prov3 accordingly Check A1 get CiscoTermConnRecordingStartedEv and CiscoTermConnRecordingTargetInfoEv. Check A1 TermConnection.getCiscoRecorderInfo(): 3. A1 call RD1 .getRecordingType() = CALL_RECORDING_TYPE_AUTOMATIC 4. Remote destination answers, and then A1 answer .getTerminalName() = central recorder device name 5. A1 put call on hold .getAddress() = Recording profile (DN 2000) 6. C1 call D1, D1 answer .getMediaForkingDeviceType() = CALL_RECORDING_MEDIA_FORKING_DEVICE_TYPE_GW 7. A1 resume Cisco Unified JTAPI Developers Guide for Cisco Unified Communications Manager, Release 15 and SUs 1440 Message Sequence Charts Message Sequence Charts