/mcpDescription Field Interface This cause is used when a called party does not respond to a call establishment message with either an alerting or connect indication within the prescribed period of time allocated. CAUSE_NOUSERRESPONDING static int This cause is returned to a calling party when the called party number indicated by the calling party is no longer assigned. CAUSE_NUMBERCHANGED static int This cause indicates that the calling party has requested an unrestricted bearer service but the equipment sending this cause only supports the restricted version of the requested bearer capability. CAUSE_ONLYRDIVEARERCAPAVAIL static int It indicates the call is OUT bound Conference call. CAUSE_OUTBOUNDCONFERENCE static int It indicates the call is OUT bound Transfer call CAUSE_OUTBOUNDTRANSFER static int This cause indicates that the call could not proceed because of Low Bandwidth. CAUSE_OUTOFBANDWIDTH static int This cause is used to report a protocol error event only when no other cause in the protocol error class applies. CAUSE_PROTOCOLERRORUNSPECIFIED static int It indicates the QSIG Path Replacement in the call. CAUSE_QSIG_PR static int This cause is used to report that the requested Quality of Service, as defined in Recommendation X.213. CAUSE_QUALOFSERVNAVAIL static int It indicates the Call is cleared as Call Manager has gone down, but media between endpoints remain connected. CAUSE_QUIET_CLEAR static int This cause indicates that a procedure has been initiated by the expiration of a timer in association with error handling procedures. CAUSE_RECOVERYONTIMEREXPIRY static int This cause indicates the call is being redirected to different party. CAUSE_REDIRECTED static int This cause indicates that the network has received a call resume request containing a call identity information element indicating a suspended call that has in the meantime been cleared while suspended (either by network time-out or by the remote user). CAUSE_REQCALLIDHASBEENCLEARED static int This cause is returned when the circuit or channel indicated by the requesting entity cannot be provided by the other side of the interface. CAUSE_REQCIRCNAVIL static int This cause indicates that the equipment sending this cause does not support the requested. CAUSE_REQFACILITYNIMPL static int Cisco Unified JTAPI Developers Guide for Cisco Unified Communications Manager, Release 15 and SUs 362 Cisco Unified JTAPI Extensions Fields