/mcpConfirm Phone Support for Contact Search Authentication Confirm that the phones in your deployment support contact search authentication. Run a Phone Feature List report to obtain a full list of phone models that support the feature. Procedure Step 1 From Cisco Unified Reporting, click System Reports. Step 2 Select Unified CM Phone Feature. Step 3 Click the Unified CM Phone Feature report. Step 4 Leave the Product field at the default value. Step 5 From the Feature drop-down, choose Authenticated Contact Search. Step 6 Click Submit. Enable Contact Search Authentication Use this procedure on Unified Communications Manager to configure contact search authentication for phone users. Procedure Step 1 Log in to the Command Line Interface. Step 2 Run the utils contactsearchauthentication status command to confirm the contact search authentication setting on this node. Step 3 If you need to configure contact search authentication: • To enable authentication, run the utils contactsearchauthentication enable command. • To disable authentication, run the utils contactsearchauthentication disable command. Step 4 Repeat this procedure on all Unified Communications Manager cluster nodes. Note You must reset phones in order for the changes to take effect. Configure Secure Directory Server for Contact Search Use this procedure to configure Unified Communications Manager with the directory server URL to which UDS sends user search requests. The default value is https://<cucm-fqdn-or-ip>:port/cucm-uds/users. Security Guide for Cisco Unified Communications Manager, Release 15 and SUs 236 User Security Confirm Phone Support for Contact Search Authentication