McDewey

Step 7 Click Save. Add V.150 Filter to SIP Trunk Security Profile Use this procedure to assign a V.150 Filter within a SIP Trunk Security Profile. If you configure a SIP V.150 SDP Offer Filtering value within a SIP Trunk Security Profile that is different than the clusterwide service parameter, the security profile setting overrides the cluster-wide service parameter setting for the trunks that use that security profile. Note Procedure Step 1 From Cisco Unified Communications Manager Administration, choose System > Security > SIP Trunk Security Profile. Step 2 Perform one of the following tasks: • Enter search criteria and Click Find to choose an existing profile from the list to modify the settings for an existing SIP Trunk Security Profile. • Click Add New to add a new SIP Trunk Security Profile. Step 3 Configure a value for the SIP V.150 Outbound SDP Offer Filtering drop-down list. Note The default setting is to use the value of the SIP V.150 Outbound SDP Offer Filtering cluster-wide service parameter. Step 4 Configure any remaining fields in the SIP Trunk Security Profile Configuration window. See the online help for more information about the fields and their configuration options. Step 5 Click Save. Configure SIP Trunk for V.150 Use this procedure to configure settings for a SIP trunk. Procedure Step 1 From Cisco Unified Communications Manager Administration, choose Device > Trunk. Step 2 Perform either of the following steps: • To create a new profile, click Add New. • Click Find and select a SIP trunk, to select an existing trunk. Step 3 For new trunks, do the following: • From the Trunk Type drop-down list, choose SIP Trunk. Security Guide for Cisco Unified Communications Manager, Release 15 and SUs 263 Advanced System Security Add V.150 Filter to SIP Trunk Security Profile