/mcpreceiving file requests.. Explanation This usually indicates a lack of memory when there is a system issue such as running out of resources. Recommended Action Use RTMT to monitor the system memory resources and consumption and correct any system issues that might be contributing to a reduced amount of system resources. Error Message %UC_TVS-1-TVSServerListenBindFailed: %[nError=Int][IPAddress=String][Port=Int][AppID=String] [ClusterID=String][NodeID=String]: Fail to connect to the network port through which file requests are received.. Explanation This usually happens if the network port is being used by other applications on the system or if the port was not closed properly in the last execution of TVS server. Recommended Action Verify that the port is not in use by other application. After stopping the TVS server, at the command line interface (CLI) on the TVS server, execute the following command: show network status listen. If the port number specified in this alarm is shown in this CLI command output, the port is being used. Restart the Cisco Unified Communications Manager system, which may help to release the port. If the problem persists, go to Cisco Unified Serviceability and enable Detailed level traces in the Trace Configuration window for the TVS service and contact the Cisco Technical Assistance Center (TAC). Error Message %UC_AUDITLOG-6-AdministrativeEvent: %[UserID=String][ClientAddress=String][Severity=String] [EventType=String][ResourceAccessed=String][EventStatus=String][AuditDetails=String] [ComponentID=String][CompulsoryEvent=String][AuditCategory=String][AppID=String] [ClusterID=String][NodeID=String]: Audit Event is generated by this application . Explanation Failed to write into the primary file path. Recommended Action Ensure that the primary file path is valid and the corresponding drive has sufficient disk space. Also, make sure that the path has security permissions similar to default log file path. Error Message %UC_AUDITLOG-6-SecurityEvent: %[UserID=String][ClientAddress=String][Severity=String] [EventType=String][ResourceAccessed=String][EventStatus=String][AuditDetails=String] [ComponentID=String][CompulsoryEvent=String][AuditCategory=String][AppID=String] [ClusterID=String][NodeID=String]: Audit Event is generated by this application . Explanation Failed to write into the primary file path. Recommended Action Ensure that the primary file path is valid and the corresponding drive has sufficient disk space. Also, make sure that the path has security permissions similar to default log file path. Error Message %UC_AUDITLOG-6-CriticalEvent: %[UserID=String][ClientAddress=String][Severity=String] [EventType=String][ResourceAccessed=String][EventStatus=String][AuditDetails=String] 5/24/26, 3:34 AM System Error Messages for Cisco Unified Communications Manager 15 - Cisco https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/err_msgs/15_x/ccmalarms15.html 112/343