/mcppower the device down, or remove it from the network. If you are attempting to auto-register this phone, verify that the cluster is not in mixed mode (System > Enterprise Parameters > Cluster Security Mode = 1) and verify that auto-registration is enabled on the node to which this device is registering (System > Cisco Unified CM > ensure that the Auto-registration Disabled... checkbox is not checked). 30 DBAccessError - Device registration failed because of an error that occurred while building the station registration profile. This usually indicates a synchronization problem with the database. View the Unified CM Database Status report in Cisco Unified Reporting to verify that database replication is Good. You can also issue the following command on the CLI to view database replication: utils dbreplication runtimestate. When database replication is Good on all nodes, restart the Cisco CallManager service on the node to which the device is attempting to register. If the problem persists, collect SDI and SDL traces for the Cisco Database layer Monitor service and contact the Cisco Technical Assistance Center (TAC). 31 AutoRegisterDBConfigTimeout - (SCCP only) Unified CM timed out during auto-registration of a device. The registration profile of the device did not get inserted into the database in time. The device will automatically attempt 5/24/26, 3:34 AM System Error Messages for Cisco Unified Communications Manager 15 - Cisco https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/err_msgs/15_x/ccmalarms15.html 182/343