/mcpto this alarm Reason Code - Enum Definitions Enum Definitions - ReasonCode Value Definition 1 ScriptResetDisabled - The system has automatically reset the script three times within a 10 minute period due to script execution errors; on the fourth occurrence of this error, Unified CM disabled the script 2 TrunkResetDisabled - The system has automatically reset the trunk three times within a 10 minute period due to script execution errors; on the fourth occurrence of this error, Unified CM disabled the script Error Message %UC_CALLMANAGER-5-SIPTrunkISV: %[DeviceName=String][AvailableRemotePeers=String] [AppID=String][ClusterID=String][NodeID=String]: All remote peers are available to handle calls for this SIP trunk . Explanation All remote peers are available to handle calls for this SIP trunk. This alarm specifies the available remote peers for this SIP trunk; each peer is identified by resolved IP address and port number, and hostname or SRV if configured on SIP trunk. Recommended Action Notification purpose only; no action is required Error Message %UC_CALLMANAGER-3-SIPTrunkOOS: %[DeviceName=String] [UnavailableRemotePeersWithReasonCode=String][AppID=String][ClusterID=String] [NodeID=String]: All remote peers are out of service and unable to handle calls for this SIP trunk. Explanation All remote peers for this SIP trunk are out of service and unable to handle calls. This alarm provides the reason code received by the SIP trunk in response to an Options request sent to the remote peer. The list of unavailable remote peers is provided in this alarm and each peer is separated by semi-colon. For each peer, the alarm provides the hostname or SRV (if configured on SIP trunk), resolved IP address, port number, and reason code in the following format: ReasonCodeType=ReasonCode. ReasonCodeType could be based on a SIP response from the remote peer as defined in SIP RFCs (Remote) or based on a reason code provided by Unified CM (Local). Examples of possible reason codes include Remote=503 ("503 Service Unavailable" a standard SIP RFC error code), Remote=408 ("408 Request Timeout" a standard SIP RFC error code), Local=1 (request timeout), Local=2 (local SIP stack is not able to create a socket connection with the remote 5/24/26, 3:34 AM System Error Messages for Cisco Unified Communications Manager 15 - Cisco https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/err_msgs/15_x/ccmalarms15.html 229/343