/mcpTrusted/Untrusted list, a IME call will not be made. You might wish to consider adding the domain or prefix to your Trusted list or removing it from the Untrusted list. Error Message %UC_CALLMANAGER-6-PublicationRunCompleted: %[StartTime=String][EndTime=String] [DIDCount=UInt][FailedDIDCount=UInt][FailedDIDs=String][AppID=String][ClusterID=String] [NodeID=String]: Completion of publication of published DID patterns. Explanation This alarm is generated when Unified CM completes a publication of the DID patterns into the Cisco Intercompany Media Network Recommended Action This alarm is provided for historic and informational purposes. It can be used to give you feedback that the system is working and is correctly publishing numbers into the Cisco Intercompany Media Network. It can also be used for troubleshooting. If some of the publishes fail for some reason, the alarm will contain a list of those numbers which were not published. If your users are receiving calls, and they are not over IP but you think they ought to be, you can check the history of these alarms to see if the number failed to be published into the network. Error Message %UC_CALLMANAGER-6-RouteRemoved: %[RouteNumber=String][Domain=String] [RouteLearnedTime=String][Reason=Enum][AppID=String][ClusterID=String][NodeID=String]: Route removed automatically. Explanation This alarm is generated when Unified CM removes a route from Unified CM Administration because the route is stale and has expired, or because the far end has indicated the number is no longer reachable at that domain Recommended Action This alarm is provided for historic and informational purposes. It helps you understand why certain numbers are in your routing tables, and why others are not. This historical information is useful to help determine why a call to a particular number is not going over IP, when you expect it to. Reason Code - Enum Definitions Enum Definitions - Reason Value Definition 1 Expired 2 Unreachable Error Message %UC_CALLMANAGER-3-InsufficientFallbackIdentifiers: %[Profile=String][FallbackDN=String] [AppID=String][ClusterID=String][NodeID=String]: Cannot allocate fallback identifier. Explanation This alarm is generated when Unified CM is processing a IME call, and is attempting to allocate a PSTN fallback DID and a DTMF digit sequence to associate with this call. However, there are too many IME calls currently in progress which are utilizing this same fallback DID, and as a result, there are no more DTMF digit sequences which could be allocated to this call. As such, this call will proceed, however mid-call fallback will not be possible for this call. Recommended Action Your first course of action should be to identify the fallback profile associated with this call. Its name will be present in the alarm. Check that profile in Cisco Unified CM Administration and examine the current setting for "Fallback Number of Correlation DTMF Digits". Increase that value by one, and check if that eliminates these alarms. In general, this parameter should 5/24/26, 3:34 AM System Error Messages for Cisco Unified Communications Manager 15 - Cisco https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/err_msgs/15_x/ccmalarms15.html 287/343