/mcp(*, 224.0.1.40), 01:16:32/00:00:00, RP 0.0.0.0, flags: DJCL Incoming interface: Null, RPF nbr 0.0.0.0 Outgoing interface list: Ethernet0/1, Forward/Sparse-Dense, 01:16:32/00:00:00
(*, 224.1.1.1), 00:28:42/00:02:59, RP 0.0.0.0, flags: D Incoming interface: Null, RPF nbr 0.0.0.0 Outgoing interface list: Ethernet0/1, Forward/Sparse-Dense, 00:28:42/00:00:00
(10.1.1.1, 224.1.1.1), 00:19:24/00:02:59, flags: TA Incoming interface: Ethernet0/0, RPF nbr 0.0.0.0 Outgoing interface list: Ethernet0/1, Forward/Sparse-Dense, 00:19:24/00:00:00
This is the sort of output you want to see. On Router B you see:
<#root> ROUTERB# show ip mroute
IP Multicast Routing Table Flags: D - Dense, S - Sparse, C - Connected, L - Local, P - Pruned R - RP-bit set, F - Register flag, T - SPT-bit set, J - Join SPT M - MSDP created entry, X - Proxy Join Timer Running A - Advertised via MSDP Timers: Uptime/Expires Interface state: Interface, Next-Hop or VCD, State/Mode
(*, 224.0.1.40), 01:23:57/00:00:00, RP 0.0.0.0, flags: DJCL Incoming interface: Null, RPF nbr 0.0.0.0 Outgoing interface list: Ethernet1/1, Forward/Sparse-Dense, 01:23:57/00:00:00
(*, 224.1.1.1), 01:19:26/00:02:59, RP 0.0.0.0, flags: DJC Incoming interface: Null, RPF nbr 0.0.0.0 Outgoing interface list: Ethernet1/1, Forward/Sparse-Dense, 01:19:26/00:00:00 Ethernet1/2, Forward/Sparse-Dense, 01:19:26/00:00:00
(10.1.1.1, 224.1.1.1), 00:17:46/00:02:59, flags: CTA Incoming interface: Ethernet1/1, RPF nbr 10.2.1.1 Outgoing interface list: Ethernet1/2, Forward/Sparse-Dense, 00:17:46/00:00:00
Router Does Not Forward Multicast Packets Due to TTL Threshold of Router This section provides a solution to the common problem where the TTL threshold is set too low, so that IP multicast traffic does not reach the receiver. This network diagram is used as an example.