McDewey

Debug examples are in the Troubleshoot section of this document. CUBE Configuration CUBE can be configured for FoIP in two places: globally under voice service voip as well as under the dial-peer. Configuration at the dial-peer matched for a given call always takes precedence over the global configuration. Configuration for T.38 and Fax Pass-Through can be configured at the same time if under different dial-peers, so that both protocols are simultaneously supported. CUBE Pass-Through Configuration In order to configure Fax Pass-Through under voice service voip, use this command (in bold): voice service voip no ip address trusted authenticate allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip fax protocol pass-through g711ulaw In order to configure Fax Pass-Through at the dial-peer, use this command (in bold): dial-peer voice 1 voip description T38 Test destination-pattern ^1000$ session protocol sipv2 session target ipv4:192.168.0.1 dtmf-relay rtp-nte