McDewey

Use the show call active voice command in user EXEC or privileged EXEC mode in order to display call information for voice calls in progress. show call active voice [brief [id identifier] | compact [duration {less time | more time}] | echo-canceller call-id | id identifier | redirect {rtpvt | tbct}] There are many arguments options to this command. This list describes some of the more useful arguments: brief—(Optional) Displays a truncated version. compact—(Optional) Displays active calls that are longer or shorter than a specified time. duration—(Optional) Displays active calls that are longer or shorter than a specified time. echo-canceller call-id—(Optional) Displays information about the state of the extended echo canceller (EC). In order to query the echo state, you need to know the hex ID in advance. In order to find the hex ID, enter the show call active voice brief command or use the show voice call status command. The range is from 0 to FFFFFFFF. show call active voice Parameter Explanation of Parameter GENERIC: Generic stats for the POTS call leg that follows SetupTime=866793 ms The clock time in 100 ms increments when the POTS leg is initiated. For incoming ISDN POTS calls, this is the time when the Q.931 call setup message is received. Index=1

PeerAddress=100 The Destination-Pattern that matches this POTS peer. For an incoming POTS call leg, this is the calling number or Automatic Number Identification (ANI). PeerSubAddress=