Page 3 — show-call-active-voice

CallDuration=00:12:26 The time in hh:mm:ss for which the call establishes. CallState=4 The call state for the call leg (4=active,3=connected,2=connecting). The call state is active. CallOrigin=2 Originate vs. answer (1=originate, 2=answer) for the call leg. This gateway answers this (POTS) call leg. ChargedUnits=0 The total number of charging units that apply to this peer since system startup. The unit of measure for this field is hundredths of a second. InfoType=2 The information type for this call (1=fax, 2=voice). This is a voice call. TransmitPackets=37291 The number of packets that transmit from the digital signal processor (DSP) to the Telephony interface. TransmitBytes=725552 The byte count equivalent of the POTS TransmitPackets value. ReceivePackets=1689 The number of packets received by the DSP from the Telephony interface. ReceiveBytes=33780 The byte count equivalent of the POTS ReceivePacketsPackets value. TELE: POTS call leg ConnectionId=[0xC59FE183 0xB1700D7 0x0 0x84431C] This is the connection identification number that the gateway gives in order to uniquely represent this call. It matches across all call legs of the call on this gateway. TxDuration=746070 ms The duration of call (ms) = 12 min 26 seconds = 746 seconds = 746070 ms. VoiceTxDuration=33780 ms The cumulative time in ms when voice packets are sent from the Telephony POTS peer to the VoIP gateway. FaxTxDuration=0 ms The cumulative time in ms when the router is in fax mode. CoderTypeRate=g729r8 The codec used for the call. NoiseLevel=-59 The active noise level for this call. This value is calculated in the comfort noise generation module and is used to generate comfort noise when voice activity detection (VAD) is enabled. ACOMLevel=20 The current ACOM level for this call. ACOM is the combined loss achieved by the echo canceler. This value is the sum of the Echo Return Loss (ERL), Echo Return Loss Enhancement (ERLE), and Non-Linear Processing (NLP) loss for the call. OutSignalLevel=-64 The output signal level in Decibels Per Milliwatt (dBm). InSignalLevel=-58 The input signal level in dBm. InfoActivity=2 The active information transfer activity state for this call. ERLLevel=20 The ERL for this call. SessionTarget= This value applies to VoIP call legs. This value is specified in the VoIP dial peer. There is no session target for POTS call legs.