McDewey

Cisco Emergency Responder Version 15 Release Notes First Published: 2023-12-18 Last Modified: 2025-05-05 Introduction Cisco Emergency Responder Release 15 supports the following new features: Migration of All Applications to 64-Bit System Release 15 brings an enhanced experience for users and administrators with major platform upgrades to align with the industry standards. Enhancements include Application-layer changes and core Linux transition for long-term support. This enhancements also includes transition to 64-bit application architecture for removal of memory bottlenecks and mitigating end-of-life for 32-bit dependencies. This release provides enhanced protection, security, innovation, and flexibility. Some of the important considerations when installing or migrating to Release 15 are: • Emergency Responder 15 requires a minimum ESXi version of 7.0 U3 or 8.0 U1 (see https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/ virtualization-cisco-emergency-responder.html) with a minimum VM Hardware version 17. The other required VM specifications like guest OS type may be found in the Readme of the base OVA on software.cisco.com. • Updated vRAM considerations for Release 15 of Emergency Responder. See Cisco Emergency Responder 15x Supported Upgrades, on page 28 for more information. • Direct Refresh Upgrades from Pre-12.5.x source to Release 15 is not supported. You must first upgrade your source to Release 12.5.x or 14 and SUs and then upgrade your source to Release 15. • Virtual Floppy Drive is replaced with virtual CDROM for touchless installation. • IPSec policy with 3DES Algorithm is not supported in FIPS mode for Release 15 in case you are planning to upgrade to Release 15. You must delete and recreate the IPSec policy with the Encryption and ESP Algorithms other than 3DES in both the nodes between which the IPSec tunnel is to be established, and then plan an upgrade. Enhanced Security Considerations From Cisco Emergency Responder Release 14 onwards, all the certificate-related operations are moved from IPsec to Tomcat certificates. To create a trust between a publisher node and subscriber node, the Tomcat certificate should be exchanged between the publisher and subscriber for any cluster-related operations to work. From Release 14SU2 onwards, if you need to perform manual or scheduled DRS backups or if you Cisco Emergency Responder Version 15 Release Notes 1

must change the subscriber hostname, the tomcat-ecdsa certificate must be exchanged between the publisher and subscriber nodes along with the tomcat certificate. Any Federal Information Processing Standards (FIPS) or hostname related changes require the same operation procedures. Switch Support Support switch port based tracking for new Voice LAN Switches: Cisco Catalyst 2960L Series, Cisco 1100 Integrated Services Routers, and Cisco 890 Integrated Services Routers. For more information, see the Supported Voice Ready Lan Switches, on page 5 section. Requirements Supported Hardware and Software The information in the following sections discuss Hardware and Software requirements for Cisco Emergency Responder 15. Read these sections before you perform an upgrade. Required Software The following table lists required software that you must install to use Emergency Responder. Table 1: Required Software Description Supported Software Release Item The software that runs the telephony network. • Cisco Unified Communications Manager 15 • Cisco Unified Communications Manager 14 and SUs • Cisco Unified Communications Manager 12.5(x) • Cisco Unified Communications Manager 11.5(x) Cisco Unified Communications Manager We recommend that you use the latest version for all the web browsers supported. • Microsoft Edge, Chrome, and Firefox on Windows 10 and 11 (64 bit) • Safari, Chrome, and Firefox on MacOS Ventura 13.4.1 Web browser Recommended Software The following table lists optional software that is recommended for use with Emergency Responder. Cisco Emergency Responder Version 15 Release Notes 2 Requirements

Table 2: Recommended Software Description Minimum software release Item Used to send email notifications to onsite alert (security) personnel. If you use an SMTP email paging server, personnel are paged instead of emailed. Any SMTP email server Email server Supported Phones The following table lists the different types of phones that support Emergency Responder. The support that Emergency Responder supplies differs depending on the type of phone and the type of switch port to which the phone is attached. Cisco will not issue bug fixes or security enhancements for endpoints that have reached End of Software Maintenance or End of Support status, regardless of whether those endpoints are deprecated or not deprecated. Cisco will not test Emergency Responder with End of Life phones. For endpoints that have reached End of Sale (EOS), or End of Software Maintenance, refer to the EOS link of that respective phone to view support details. Note Table 3: Supported Phones Description Phones These phones do not require any special Emergency Responder configuration. However, you must enable Cisco Discovery Protocol on the switches. Note Although Cisco Analog Telephone Adapter (ATA) phones support Cisco Discovery Protocol and SCCP, Emergency Responder cannot automatically track them. You can add ATA phones manually and assign them to an Emergency Response Location (ERL). Emergency Responder routes calls from ATA phones based on the assigned ERL. Note Cisco IP Communicator can be tracked using Cisco Discovery Protocol only when it is installed with the Device ID containing the MAC address of the wired network interface and operating over a wired network interface. Phones that are automatically tracked using Switch-port based tracking Most Cisco IP Phones and Telepresence/Webex devices support Cisco Discovery Protocol (CDP). This includes the Skinny Call Control Protocol (SCCP) and Session Initiation Protocol (SIP) IP Phones. Check the data sheets for each Cisco phone model/series to confirm CDP support. Devices that do not support CDP can potentially be tracked using the MAC table on the switch, to do this you must toggle “Enable CAM-based Phone Tracking” when you add the network switch to Emergency Responder. To track these phones, you must configure the subnet and then assign ERLs to the configured subnets. Note Any IP endpoint can be tracked at call time using the IP subnet provided that the Use IP Address from Call Signaling Telephony setting is enabled. Phones that you can track using an IP subnet Any Cisco Unified IP Phone, Telepresence/Webex device, or third-party SIP phone can be tracked using IP subnet based tracking. Cisco Jabber can be tracked using IP subnet-based tracking. Cisco Emergency Responder Version 15 Release Notes 3 Supported Phones

Description Phones These phones are supported only if their calls are routed by Cisco Unified Communications Manager. Note Any IP endpoint can be tracked at call time using the IP subnet provided that the Use IP Address From Call Signaling Telephony setting is enabled. Cisco Webex client (registered natively to Unified Communications Manager) is represented through the registered Spark RD (Remote Destination) and needs to be manually defined in Emergency Responder for tracking. Phones that you can manually define or track using an IP subnet • Phones that are connected to analog line gateways such as Cisco VG350 or VG224 series or ATA 180 series or ATA 190 series or ATA 191 series. • Any H.323 endpoints • Cisco Webex App (registered natively to Unified Communications Manager) When configured for off-premises use in Unified Communications Manager 9.0 and later, these phones provide displays for off-premises users to confirm or update their off-premises location. Note If the user dismisses the display before confirming or updating the location, the location can be recovered by selecting Running Applications from the Services menu or by resetting the phone. Phones supported for off-premises location confirmation and update with the Remote Worker Emergency Calling feature in Unified Communications Manager 9.0 and later • Cisco IP Communicator • Cisco Virtual Desktop (VXCC) • Cisco IP Phone 7800 Series • Cisco Unified IP Phone 9841, 9851, 9861, 9871, 9971, 9951, 8961, 8945, 8941, 8865, 8861, 8851, 8845, 8841, 7975, 7971, 7970, 7965, 7962, 7961, 7945, 7942, 7941, 7911, 7910, and 7906 Wireless Access Points need to be defined in Unified Communications Manager 11.5 and later, these phones provide their upstream infrastructure information (like BSSID) through Station Info messages to Unified Communications Manager. Cisco Emergency Responder through AXL Change Notification can track these phones through the associated Access Point. Phones supported for Access Point based tracking with Unified Communications Manager 11.5 and later Cisco Unified Wireless IP Phone 7925G, 7925G-EX, 7926G, 8821, Cisco Jabber, and Cisco Webex App Supported Meraki Wireless Access Point for Location Awareness The following table lists the Meraki Wireless Access Point for Location Awareness that Emergency Responder supports. Support is limited to the model with this specific OUI. While a model may have multiple OUIs, from the Unified Communications Manager or Emergency Responder perspective, only those OUIs explicitly mentioned are supported. Any other OUIs for the same model are not supported within Unified Communications Manager or Emergency Responder. Note Cisco Emergency Responder Version 15 Release Notes 4 Supported Meraki Wireless Access Point for Location Awareness

Table 4: Supported Meraki Wireless Access Point for Location Awareness Organizationally Unique Identifier (OUI) Meraki Wireless Access Point 00:18:0A MR11 4C:C8:A1 MR20 2C:3F:0B MR30H 68:3A:1E MR30H 34:56:FE MR33 98:18:88 MR33 A8:46:9D MR36 AC:17:C8 MR42 E0:55:3D MR52 E0:CB:BC MR52 E4:55:A8 MR56 F8:9E:28 MR70 0C:8D:DB MR72 Supported Voice Ready Lan Switches The following table lists the LAN switch models that Emergency Responder supports. A LAN switch model is supported only if the SNMP System Object ID appears in this table, regardless of the LAN switch configuration or software release. Emergency Responder requires SNMP Version 1, Version 2, Version 2c, or Version 3 for automatic tracking of Cisco Unified IP Phones by connected switch ports. Note Cisco will not issue bug fixes or security enhancements for devices that have reached End of Software Maintenance or End of Support status, regardless of whether those devices are deprecated or not deprecated. Cisco will not test Emergency Responder with End of Life devices. For devices that have reached End of Sale (EOS), or End of Software Maintenance, refer to the EOS link of that respective device to view support details. For information on all of the End of Support and End-of-Life products, see https://www.cisco.com/c/en_ca/ products/eos-eol-listing.html. For a list of firmware versions that are used for each Cisco device, see the Cisco Collaboration Systems Release Compatibility Matrix at http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/uc_system/unified/ communications/system/Compatibility/CSR-Compatibility-Matrix.html. Important Cisco Emergency Responder Version 15 Release Notes 5 Supported Voice Ready Lan Switches

Table 5: Supported Voice-Ready LAN Switches System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.2959 C1000-8FP-2G-L Catalyst C1000 1.3.6.1.4.1.9.1.2959 C1000-8P-2G-L 1.3.6.1.4.1.9.1.2959 C1000-8FP-E-2G-L 1.3.6.1.4.1.9.1.2959 C1000-8P-E-2G-L 1.3.6.1.4.1.9.1.2959 C1000-8T-2G-L 1.3.6.1.4.1.9.1.2959 C1000-8T-E-2G-L 1.3.6.1.4.1.9.1.2959 C1000-16FP-2G-L 1.3.6.1.4.1.9.1.2959 C1000-16P-2G-L 1.3.6.1.4.1.9.1.2959 C1000-16P-E-2G-L 1.3.6.1.4.1.9.1.2897 C1000-16T-2G-L 1.3.6.1.4.1.9.1.2959 C1000-16T-E-2G-L 1.3.6.1.4.1.9.1.2959 C1000-24FP-4G-L 1.3.6.1.4.1.9.1.2959 C1000-24FP-4X-L 1.3.6.1.4.1.9.1.2959 C1000-24P-4G-L 1.3.6.1.4.1.9.1.2897 C1000-24P-4X-L 1.3.6.1.4.1.9.1.2959 C1000-24PP-4G-L 1.3.6.1.4.1.9.1.2897 C1000-24T-4X-L Cisco Emergency Responder Version 15 Release Notes 6 Supported Voice Ready Lan Switches

System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.2959 C1000-48FP-4G-L Catalyst C1000 1.3.6.1.4.1.9.1.2897 C1000-48FP-4X-L 1.3.6.1.4.1.9.1.2897 C1000-48P-4X-L 1.3.6.1.4.1.9.1.2959 C1000-48PP-4G-L 1.3.6.1.4.1.9.1.2959 C1000-48T-4G-L 1.3.6.1.4.1.9.1.2959 C1000-24T-4G-L 1.3.6.1.4.1.9.1.2943 C1000SM-16FP-2G-L 1.3.6.1.4.1.9.1.2941 C1000SM-16P-2G-L 1.3.6.1.4.1.9.1.2942 C1000SM-16P-E-2G-L 1.3.6.1.4.1.9.1.2939 C1000SM-16T-2G-L 1.3.6.1.4.1.9.1.2940 C1000SM-16T-E-2G-L 1.3.6.1.4.1.9.1.2947 C1000SM-24FP-4G-L 1.3.6.1.4.1.9.1.2954 C1000SM-24FP-4X-L 1.3.6.1.4.1.9.1.2946 C1000SM-24P-4G-L 1.3.6.1.4.1.9.1.2953 C1000SM-24P-4X-L 1.3.6.1.4.1.9.1.2945 C1000SM-24PP-4G-L 1.3.6.1.4.1.9.1.2944 C1000SM-24T-4G-L 1.3.6.1.4.1.9.1.2952 C1000SM-24T-4X-L Cisco Emergency Responder Version 15 Release Notes 7 Supported Voice Ready Lan Switches

System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.2951 C1000SM-48FP-4G-L Catalyst C1000 1.3.6.1.4.1.9.1.2957 C1000SM-48FP-4X-L 1.3.6.1.4.1.9.1.2950 C1000SM-48P-4G-L 1.3.6.1.4.1.9.1.2956 C1000SM-48P-4X-L 1.3.6.1.4.1.9.1.2949 C1000SM-48PP-4G-L 1.3.6.1.4.1.9.1.2948 C1000SM-48T-4G-L 1.3.6.1.4.1.9.1.2955 C1000SM-48T-4X-L 1.3.6.1.4.1.9.1.2935 C1000SM-8P-2G-L 1.3.6.1.4.1.9.1.2936 C1000SM-8P-E-2G-L 1.3.6.1.4.1.9.1.2897 C1000-48T-4X-L 1.3.6.1.4.1.9.1.2933 C1000SM-8T-2G-L 1.3.6.1.4.1.9.1.2934 C1000SM-8T-E-2G-L 1.3.6.1.4.1.9.1.2897 C1000-12MP-2X-L 1.3.6.1.4.1.9.1.2897 C1000-24MP-4X-L 1.3.6.1.4.1.9.1.2937 C1000SM-8FP-2G-L Catalyst C1000 1.3.6.1.4.1.9.1.2938 C1000SM-8FP-E-2G-L 1.3.6.1.4.1.9.1.3021 C1000FE-24T-4G-L 1.3.6.1.4.1.9.1.3022 C1000FE-24P-4G-L 1.3.6.1.4.1.9.1.3023 C1000FE-48T-4G-L 1.3.6.1.4.1.9.1.3024 C1000FE-48P-4G-L 1.3.6.1.4.1.9.1.1246 CGS-2520-16S-8PC Connected Grid 2500 1.3.6.1.4.1.9.1.542 2940-8TF Catalyst 2940 1.3.6.1.4.1.9.1.540 2940-8TT Cisco Emergency Responder Version 15 Release Notes 8 Supported Voice Ready Lan Switches

System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.323 2950-12 Catalyst 2950 1.3.6.1.4.1.9.1.324 2950-24 1.3.6.1.4.1.9.1.325 2950C-24 1.3.6.1.4.1.9.1.472 2950G-24-EI-DC 1.3.6.1.4.1.9.1.430 2950S-24 1.3.6.1.4.1.9.1.480 2950SX-24 1.3.6.1.4.1.9.1.560 2950SX-48 1.3.6.1.4.1.9.1.951 2960-24LT-L Catalyst 2960 1.3.6.1.4.1.9.1.950 2960-24PC-L 1.3.6.1.4.1.9.1.929 2960-24-S 1.3.6.1.4.1.9.1.694 2960-24TC-L 1.3.6.1.4.1.9.1.928 2960-24TC-S 1.3.6.1.4.1.9.1.716 2960-24TT-L 1.3.6.1.4.1.9.1.1016 2960-48PST-L 1.3.6.1.4.1.9.1.695 2960-48TC-L 1.3.6.1.4.1.9.1.927 2960-48TC-S 1.3.6.1.4.1.9.1.717 2960-48TT-L 1.3.6.1.4.1.9.1.798 2960-8TC-L 1.3.6.1.4.1.9.1.1006 2960-8TC-S 1.3.6.1.4.1.9.1.696 2960G-24TC-L 1.3.6.1.4.1.9.1.697 2960G-48TC-L 1.3.6.1.4.1.9.1.799 2960G-8TC-L 1.3.6.1.4.1.9.1.952 2960PD-8TT-L 1.3.6.1.4.1.9.1.1148 2960-48PST-S 1.3.6.1.4.1.9.1.1146 2960-24LC-S 1.3.6.1.4.1.9.1.1147 2960-24PC-S Cisco Emergency Responder Version 15 Release Notes 9 Supported Voice Ready Lan Switches

System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.1315 2960CPD-8PT-L Catalyst 2960-C 1.3.6.1.4.1.9.1.1366 2960C-8PC-L 1.3.6.1.4.1.9.1.1367 2960C-12PC-L 1.3.6.1.4.1.9.1.1748 2960-Plus 48PST-L Catalyst 2960-Plus 1.3.6.1.4.1.9.1.1749 2960-Plus 24PC- 1.3.6.1.4.1.9.1.1750 2960-Plus 24LC-L 1.3.6.1.4.1.9.1.1753 2960-Plus 48PST-S 1.3.6.1.4.1.9.1.1754 2960-Plus 24PC-S 1.3.6.1.4.1.9.1.1755 2960-Plus 24LC-S 1.3.6.1.4.1.9.1.1208 2960S Stack Catalyst 2960-S 1.3.6.1.4.1.9.1.1261 2960S-24PD-L 1.3.6.1.4.1.9.1.1265 2960S-24PS-L 1.3.6.1.4.1.9.1.1258 2960S-48FPD-L 1.3.6.1.4.1.9.1.1263 2960S-48FPS-L 1.3.6.1.4.1.9.1.1259 2960S-48LPD-L 1.3.6.1.4.1.9.1.1264 2960S-48LPS-L 1.3.6.1.4.1.9.1.2495 C2960L24TQLL Catalyst 2960L 1.3.6.1.4.1.9.1.2496 C2960L48TQLL 1.3.6.1.4.1.9.1.2497 C2960L24PQLL 1.3.6.1.4.1.9.1.2498 C2960L48PQLL 1.3.6.1.4.1.9.1.2361 C2960L8PSLL Cisco Emergency Responder Version 15 Release Notes 10 Supported Voice Ready Lan Switches

System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.1691 Catalyst 2960X-48LPD-L Catalyst 2960X 1.3.6.1.4.1.9.1.1692 Catalyst 2960X-48TD-L 1.3.6.1.4.1.9.1.1694 Catalyst 2960X-24TD-L 1.3.6.1.4.1.9.1.1695 Catalyst 2960X-48FPS-L 1.3.6.1.4.1.9.1.1696 Catalyst 2960X-48LPS-L 1.3.6.1.4.1.9.1.1698 Catalyst 2960X-48TS-L 1.3.6.1.4.1.9.1.1699 Catalyst 2960X-24TS-L 1.3.6.1.4.1.9.1.1700 Catalyst 2960X-24PSK-L 1.3.6.1.4.1.9.1.1701 Catalyst 2960X-48LPS-S 1.3.6.1.4.1.9.1.1702 Catalyst 2960X-24PS-S 1.3.6.1.4.1.9.1.1703 Catalyst 2960X-48TS-LL 1.3.6.1.4.1.9.1.1704 Catalyst 2960X-24TS-LL 1.3.6.1.4.1.9.1.1697 Catalyst 2960X-24PS-L 1.3.6.1.4.1.9.1.1693 Catalyst 2960X-24PD-L 1.3.6.1.4.1.9.1.1690 Catalyst 2960X-48FPD-L Cisco Emergency Responder Version 15 Release Notes 11 Supported Voice Ready Lan Switches

System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.1800 Catalyst 2960XR-24PD-I Catalyst 2960XR 1.3.6.1.4.1.9.1.1801 Catalyst 2960XR-24TD-I 1.3.6.1.4.1.9.1.1802 Catalyst 2960XR-48FPS-I 1.3.6.1.4.1.9.1.1803 Catalyst 2960XR-48LPS-I 1.3.6.1.4.1.9.1.1804 Catalyst 2960XR-48TS-I 1.3.6.1.4.1.9.1.1805 Catalyst 2960XR-24PS-I 1.3.6.1.4.1.9.1.1806 Catalyst 2960XR-24TS-I 1.3.6.1.4.1.9.1.1807 Catalyst 2960XR-48FPD-L 1.3.6.1.4.1.9.1.1808 Catalyst 2960XR-48LPD-L 1.3.6.1.4.1.9.1.1809 Catalyst 2960XR-48PD-L 1.3.6.1.4.1.9.1.1810 Catalyst 2960XR-24PD-L 1.3.6.1.4.1.9.1.1811 Catalyst 2960XR-24TD-L 1.3.6.1.4.1.9.1.1812 Catalyst 2960XR-48FPS-L 1.3.6.1.4.1.9.1.1813 Catalyst 2960XR-48LPS-L 1.3.6.1.4.1.9.1.1814 Catalyst 2960XR-48TS-L 1.3.6.1.4.1.9.1.1815 Catalyst 2960XR-24PS-L 1.3.6.1.4.1.9.1.1816 Catalyst 2960XR-24TS-L 1.3.6.1.4.1.9.1.1797 Catalyst 2960XR-48FPD-I 1.3.6.1.4.1.9.1.1798 Catalyst 2960XR-48LPD-I 1.3.6.1.4.1.9.1.1799 Catalyst 2960XR-48TD-I 1.3.6.1.4.1.9.1.1067 2975GS-48PS-L Catalyst 2975 1.3.6.1.4.1.9.1.1068 2975GS-48PS-L-Stack 1.3.6.1.4.1.9.1.452 3550-24-DC Catalyst 3550 Cisco Emergency Responder Version 15 Release Notes 12 Supported Voice Ready Lan Switches

System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.1015 3560-12PC-S Catalyst 3560 1.3.6.1.4.1.9.1.563 3560-24PS 1.3.6.1.4.1.9.1.633 3560-24TS 1.3.6.1.4.1.9.1.564 3560-48PS 1.3.6.1.4.1.9.1.634 3560-48TS 1.3.6.1.4.1.9.1.797 3560-8PC 1.3.6.1.4.1.9.1.614 3560G-24PS 1.3.6.1.4.1.9.1.615 3560G-24TS 1.3.6.1.4.1.9.1.616 3560G-48PS 1.3.6.1.4.1.9.1.617 3560G-48TS 1.3.6.1.4.1.9.1.1021 3560V2-24PS 1.3.6.1.4.1.9.1.1025 3560V2-48PS 1.3.6.1.4.1.9.1. 2133 3560CX-12TC-S 1.3.6.1.4.1.9.1.2131 3560CX-8XPD-S 1.3.6.1.4.1.9.1.2130 3560CX-8PT-S 1.3.6.1.4.1.9.1.1317 3560CG-8PC-S Catalyst 3560-C 1.3.6.1.4.1.9.1.1368 3560CPD-8PT-S 1.3.6.1.4.1.9.1.1466 3560C-8PC-S 1.3.6.1.4.1.9.1.1465 3560C-12PC-S 1.3.6.1.4.1.9.1.930 3560E-12D Catalyst 3560-E 1.3.6.1.4.1.9.1.956 3560E-12SD 1.3.6.1.4.1.9.1.795 3560E-24PD 1.3.6.1.4.1.9.1.793 3560E-24TD 1.3.6.1.4.1.9.1.796 3560E-48PD 1.3.6.1.4.1.9.1.794 3560E-48TD Cisco Emergency Responder Version 15 Release Notes 13 Supported Voice Ready Lan Switches

System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.1228 3560X-24P (-L/S/E) Catalyst 3560-X 1.3.6.1.4.1.9.1.1229 3560X-48PF (-L/S/E) 1.3.6.1.4.1.9.1.1229 3560X-48P (-L/S/E) 1.3.6.1.4.1.9.1.1710 3560X-48U 1.3.6.1.4.1.9.1.2066 3560X-48TS 1.3.6.1.4.1.9.1.1227 WS-C3560X-48T-S 1.3.6.1.4.1.9.1.1823 Catalyst C3650-24TS (-L/S/E) Catalyst 3650 1.3.6.1.4.1.9.1. 1824 Catalyst C3650-48TS (-L/S/E) 1.3.6.1.4.1.9.1. 1825 Catalyst C3650-24PS (-L/S/E) 1.3.6.1.4.1.9.1. 1826 Catalyst C3650-48PS (-L/S/E) 1.3.6.1.4.1.9.1. 1827 Catalyst C3650-24TD (-L/S/E) 1.3.6.1.4.1.9.1. 1828 Catalyst C3650-48TD (-L/S/E) 1.3.6.1.4.1.9.1. 1829 Catalyst C3650-24PD (-L/S/E) 1.3.6.1.4.1.9.1.1830 Catalyst C3650-48PD (-L/S/E) 1.3.6.1.4.1.9.1.1830 Catalyst C3650-Stack (-L/S/E) 1.3.6.1.4.1.9.1.1881 Catalyst C3650-48PQ (-L/S/E) 1.3.6.1.4.1.9.1.1882 Catalyst C3650-48TQ (-L/S/E) Cisco Emergency Responder Version 15 Release Notes 14 Supported Voice Ready Lan Switches

System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.516 3750 Stack Catalyst 3750 1.3.6.1.4.1.9.1.656 3750-24FS 1.3.6.1.4.1.9.1.536 3750-24PS 1.3.6.1.4.1.9.1.513 3750-24TS 1.3.6.1.4.1.9.1.535 3750-48PS 1.3.6.1.4.1.9.1.512 3750-48TS 1.3.6.1.4.1.9.1.530 3750G-12S 1.3.6.1.4.1.9.1.688 3750G-12S-SD 1.3.6.1.4.1.9.1.591 3750G-16TD 1.3.6.1.4.1.9.1.602 3750G-24PS 1.3.6.1.4.1.9.1.514 3750G-24T 1.3.6.1.4.1.9.1.511 3750G-24TS 1.3.6.1.4.1.9.1.624 3750G-24TS-1U 1.3.6.1.4.1.9.1.778 3750G-24WS-S25 1.3.6.1.4.1.9.1.779 3750G-24WS-S50 1.3.6.1.4.1.9.1.603 3750G-48PS 1.3.6.1.4.1.9.1.604 3750G-48TS 1.3.6.1.4.1.9.1.1023 3750V2-24PS 1.3.6.1.4.1.9.1.1027 3750V2-48PS 1.3.6.1.4.1.9.1.1225 3750X-48P (-L/E) Catalyst 3750-X 1.3.6.1.4.1.9.1.1225 3750X-48PF (-L/S/E) 1.3.6.1.4.1.9.1.1225 3750X-48P (-L/S) 1.3.6.1.4.1.9.1.1224 3750X-24P (-L/S/E) 1.3.6.1.4.1.9.1.574 3750-24TE-M Catalyst 3750 Metro Cisco Emergency Responder Version 15 Release Notes 15 Supported Voice Ready Lan Switches

System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.792 3750E-24PD Catalyst 3750-E 1.3.6.1.4.1.9.1.789 3750E-24TD 1.3.6.1.4.1.9.1.791 3750E-48PD 1.3.6.1.4.1.9.1.790 3750E-48TD-S 1.3.6.1.4.1.9.1.1767 Catalyst C3850-24U (-L/S/E) Catalyst 3850 1.3.6.1.4.1.9.1.1768 Catalyst C3850-48U (-L/S/E) 1.3.6.1.4.1.9.1.1641 3850-48P (-L/S/E) 1.3.6.1.4.1.9.1.1642 3850-24P (-L/S/E) 1.3.6.1.4.1.9.1.1643 3850-48T (-L/S/E) 1.3.6.1.4.1.9.1.1644 3850-24T (-L/S/E) 1.3.6.1.4.1.9.1.1880 Catalyst 3850-12S-S 1.3.6.1.4.1.9.1.1880 Catalyst 3850-12S-E 1.3.6.1.4.1.9.1.1879 Catalyst 3850-24S-S 1.3.6.1.4.1.9.1.1879 Catalyst 3850-24S-E 1.3.6.1.4.1.9.1.1745 Catalyst C3850-12X48U 1.3.6.1.4.1.9.5.58 4503 Catalyst 4500 1.3.6.1.4.1.9.1.503 4503 1.3.6.1.4.1.9.5.59 4506 1.3.6.1.4.1.9.1.502 4506 1.3.6.1.4.1.9.1.501 4507 1.3.6.1.4.1.9.1.537 4510 1.3.6.1.4.1.9.1.874 4503-E Catalyst 4500-E 1.3.6.1.4.1.9.1.875 4506-E 1.3.6.1.4.1.9.1.876 4507R-E 1.3.6.1.4.1.9.1.877 4510R-E 1.3.6.1.4.1.9.1.1286 4507R+E 1.3.6.1.4.1.9.1.1287 4510R+E Cisco Emergency Responder Version 15 Release Notes 16 Supported Voice Ready Lan Switches

System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.626 4948 Catalyst 4900 1.3.6.1.4.1.9.1.659 4948-10GE 1.3.6.1.4.1.9.5.56 6503 Catalyst 6500 1.3.6.1.4.1.9.1.449 6503 1.3.6.1.4.1.9.1.657 6504 1.3.6.1.4.1.9.5.45 6506 1.3.6.1.4.1.9.1.282 6506 1.3.6.1.4.1.9.5.44 6509 1.3.6.1.4.1.9.1.283 6509 1.3.6.1.4.1.9.5.61 6509-NEB 1.3.6.1.4.1.9.5.50 6513 1.3.6.1.4.1.9.1.400 6513 1.3.6.1.4.1.9.1.283 6509-E Catalyst 6500-E 1.3.6.1.4.1.9.1.282 6506-E 1.3.6.1.4.1.9.1.657 6504-E 1.3.6.1.4.1.9.1.449 6503-E 1.3.6.1.4.1.9.1.1866 Catalyst 6800ia-48FPD-L Catalyst 6800ia 1.3.6.1.4.1.9.1.1867 Catalyst 6800ia-48TD-L 1.3.6.1.4.1.9.1.1934 Catalyst 68xx Virtual Switch Catalyst 68xx 1.3.6.1.4.1.9.1.1784 Catalyst 6880-XLE Catalyst 6880-X 1.3.6.1.4.1.9.1.1765 Catalyst 6807-XL Catalyst 6807-XL 1.3.6.1.4.1.9.1.2694 C9200-24T Catalyst 9200 1.3.6.1.4.1.9.1.2694 C9200-24P 1.3.6.1.4.1.9.1.2694 C9200-48T 1.3.6.1.4.1.9.1.2694 C9200-48P Cisco Emergency Responder Version 15 Release Notes 17 Supported Voice Ready Lan Switches

System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.3097 C9200CX-8P-2X2G Catalyst 9200CX 1.3.6.1.4.1.9.1.3079 C9200CX-12P-2X2G 1.3.6.1.4.1.9.1.3078 C9200CX-12T-2X2G 1.3.6.1.4.1.9.1.3164 C9200CX-12P-2XGH 1.3.6.1.4.1.9.1.3098 C9200CX-8PT-2G 1.3.6.1.4.1.9.1.3099 C9200CX-8UXG-2X 1.3.6.1.4.1.9.1.3195 C9200CX-8P-2XGH 1.3.6.1.4.1.9.1.3196 C9200CX-8UXG-2XH 1.3.6.1.4.1.9.1.2695 C9200L-24T-4G Catalyst 9200L 1.3.6.1.4.1.9.1.2695 C9200L-24P-4G 1.3.6.1.4.1.9.1.2695 C9200L-48T-4G 1.3.6.1.4.1.9.1.2695 C9200L-48P-4G 1.3.6.1.4.1.9.1.2695 C9200L-24T-4X 1.3.6.1.4.1.9.1.2695 C9200L-24P-4X 1.3.6.1.4.1.9.1.2695 C9200L-48T-4X 1.3.6.1.4.1.9.1.2695 C9200L-48P-4X 1.3.6.1.4.1.9.1.2494 c9300 Catalyst 9300 1.3.6.1.4.1.9.1.2435 c930024T 1.3.6.1.4.1.9.1.2436 c930024P 1.3.6.1.4.1.9.1.2437 c930024U 1.3.6.1.4.1.9.1.2438 c930024X 1.3.6.1.4.1.9.1.2439 c930048T 1.3.6.1.4.1.9.1.2440 c930048P 1.3.6.1.4.1.9.1.2441 c930048U 1.3.6.1.4.1.9.1.2442 c930048UXM Cisco Emergency Responder Version 15 Release Notes 18 Supported Voice Ready Lan Switches

System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.2583 C9300L-24T-4X Catalyst 9300L 1.3.6.1.4.1.9.1.2584 C9300L-48T-4X 1.3.6.1.4.1.9.1.2585 C9300L-24P-4G 1.3.6.1.4.1.9.1.2586 C9300L-48P-4G 1.3.6.1.4.1.9.1.2792 C9300L-24T-4G 1.3.6.1.4.1.9.1.2793 C9300L-48T-4G 1.3.6.1.4.1.9.1.2798 C9300L-24P-4X 1.3.6.1.4.1.9.1.2800 C9300L-24UXG-4X Catalyst 9300L 1.3.6.1.4.1.9.1.2801 C9300L-48UXG-4X 1.3.6.1.4.1.9.1.2802 C9300L-24UXG-2Q 1.3.6.1.4.1.9.1.2803 C9300L-48UXG-2Q 1.3.6.1.4.1.9.1.2804 C9300L-48P-4X 1.3.6.1.4.1.9.1.2992 C9300L-48PF-4X 1.3.6.1.4.1.9.1.2993 C9300L-48PF-4G 1.3.6.1.4.1.9.1.2804 C9300LM-48UX-4Y 1.3.6.1.4.1.9.1.2500 C9407R Catalyst 9400 1.3.6.1.4.1.9.1.2501 C9410R 1.3.6.1.4.1.9.1.2499 C9404R 1.3.6.1.4.1.9.1.2418 c950012Q Catalyst 9500 1.3.6.1.4.1.9.1.2419 c950024Q 1.3.6.1.4.1.9.1.2420 c950040X 1.3.6.1.4.1.9.1.725 500-24LC Catalyst Express 500 1.3.6.1.4.1.9.1.726 500-24PC 1.3.6.1.4.1.9.1.724 500-24TT 1.3.6.1.4.1.9.1.727 500G-12TC Cisco Emergency Responder Version 15 Release Notes 19 Supported Voice Ready Lan Switches

System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.933 520-24LC Catalyst Express 520 1.3.6.1.4.1.9.1.934 520-24PC 1.3.6.1.4.1.9.1.932 520-24TT 1.3.6.1.4.1.9.1.897 520-8PC 1.3.6.1.4.1.9.1.935 520G-24TC 1.3.6.1.4.1.9.1.788 ME 4924-10GE Cisco ME 4900 1.3.6.1.4.1.9.1.1936 ciscoC6880x Catalyst C6880x 1.3.6.1.4.1.9.1.2131 Cisco Catalyst 3560CX-8XPD-S Catalyst 3560CX 1.3.6.1.4.1.9.1.2130 Cisco Catalyst 3560CX-8PT-S 1.3.6.1.4.1.9.1.2132 catwsC3560CX12pdS Catalyst C3560 1.3.6.1.4.1.9.1.2134 catwsC3560CX12pcS 1.3.6.1.4.1.9.1.2135 catwsC3560CX8tcS 1.3.6.1.4.1.9.1.2136 catwsC3560CX8pcS 1.3.6.1.4.1.9.1.2137 catwsC2960CX8tcL Catalyst C2960 1.3.6.1.4.1.9.1.2191 Cisco Catalyst 2960CX-8PC-L Catalyst 2960CX Cisco Emergency Responder Version 15 Release Notes 20 Supported Voice Ready Lan Switches

Table 6: Supported Voice-Ready LAN Switches (Continuation) System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.1842 IE-2000-24T67-B Catalyst IE2000 1.3.6.1.4.1.9.1.1841 IE-2000-24T67-B 1.3.6.1.4.1.9.1.1844 IE-2000-24T67-B 1.3.6.1.4.1.9.1.1843 IE-2000-24T67-B 1.3.6.1.4.1.9.1.1845 IE-2000-16T67P-G-E 1.3.6.1.4.1.9.1.1470 IE-2000-4TS-G-L 1.3.6.1.4.1.9.1.1470 IE-2000-4TS-G-B 1.3.6.1.4.1.9.1.1471 IE-2000-4T-G-B 1.3.6.1.4.1.9.1.1472 IE-2000-8TC-B 1.3.6.1.4.1.9.1.1474 IE-2000-16TC-L Table 7: Supported Voice-Ready LAN Switches (Continuation) System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.1474 IE-2000-16TC-B Catalyst IE2000 1.3.6.1.4.1.9.1.1475 IE-2000-16TC-G-L 1.3.6.1.4.1.9.1.1715 IE-2000-16TC-G-N 1.3.6.1.4.1.9.1.1730 IE-2000-16PTC-G-E 1.3.6.1.4.1.9.1.1759 IE-2000-4S-TS-G-B 1.3.6.1.4.1.9.1.1471 IE-2000-4T-G-L 1.3.6.1.4.1.9.1.1729 IE-2000-16PTC-G-L 1.3.6.1.4.1.9.1.1473 IE-2000-8TC-G-L 1.3.6.1.4.1.9.1.1473 IE-2000-8TC-G-B 1.3.6.1.4.1.9.1.1520 IE-2000-16TC-G-X Cisco Emergency Responder Version 15 Release Notes 21 Supported Voice Ready Lan Switches

Table 8: Supported Voice-Ready LAN Switches (Continuation) System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.1839 IE-2000U-4S-G Catalyst IE2000U 1.3.6.1.4.1.9.1.1869 IE-2000U-4TS-G 1.3.6.1.4.1.9.1.1870 IE-2000U-8TC-G 1.3.6.1.4.1.9.1.1868 IE-2000U-16TC-GP 1.3.6.1.4.1.9.1.1871 IE-2000U-16TC-GP 1.3.6.1.4.1.9.1.1872 IE-2000U-16TC-GP 1.3.6.1.4.1.9.1.1840 IE-2000U-16TC-GP Table 9: Supported Voice-Ready LAN Switches (Continuation) System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.958 IE-3000-4TC Catalyst IE3x00/IE30x0 1.3.6.1.4.1.9.1.959 IE-3000-8TC 1.3.6.1.4.1.9.1.1319 IE-3010-16S-8PC 1.3.6.1.4.1.9.1.1320 IE-3010-24TC 1.3.6.1.4.1.9.1.2684 IE-3200-8P2S 1.3.6.1.4.1.9.1.2684 IE-3200-8P2S-E 1.3.6.1.4.1.9.1.2683 IE-3200-8T2S 1.3.6.1.4.1.9.1.2685 IE-3300-8T2S 1.3.6.1.4.1.9.1.2686 IE-3300-8P2S Cisco Emergency Responder Version 15 Release Notes 22 Supported Voice Ready Lan Switches

Table 10: Supported Voice-Ready LAN Switches (Continuation) System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.2872 IE-3400-8T2S Catalyst IE3400/IE3400H 1.3.6.1.4.1.9.1.2687 IE-3400-8P2S 1.3.6.1.4.1.9.1.2883 IE-3400H-24FT 1.3.6.1.4.1.9.1.2882 IE-3400H-16FT 1.3.6.1.4.1.9.1.2885 IE-3400H-16T 1.3.6.1.4.1.9.1.2886 IE-3400H-24T 1.3.6.1.4.1.9.1.2881 IE-3400H-8FT 1.3.6.1.4.1.9.1.2884 IE-3400H-8T Table 11: Supported Voice-Ready LAN Switches (Continuation) System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.2079 IE-4000-8GT8GP4G-E Catalyst IE4000 1.3.6.1.4.1.9.1.2072 IE-4000-4T4P4G-E 1.3.6.1.4.1.9.1.2070 IE-4000-8T4G-E 1.3.6.1.4.1.9.1.2078 IE-4000-16GT4G-E 1.3.6.1.4.1.9.1.2073 IE-4000-16T4G-E 1.3.6.1.4.1.9.1.2077 IE-4000-4GC4GP4G-E 1.3.6.1.4.1.9.1.2080 IE-4000-4GS8GP4G-E 1.3.6.1.4.1.9.1.2074 IE-4000-4S8P4G-E 1.3.6.1.4.1.9.1.2069 IE-4000-4TC4G-E 1.3.6.1.4.1.9.1.2076 IE-4000-8GS4G-E Cisco Emergency Responder Version 15 Release Notes 23 Supported Voice Ready Lan Switches

Table 12: Supported Voice-Ready LAN Switches (Continuation) System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.2075 IE-4000-8GT4G-E i+F45:F48 Catalyst IE4000 1.3.6.1.4.1.9.1.2071 IE-4000-8S4G-E 1.3.6.1.4.1.9.1.2368 IE-4010-4S24P Catalyst IE4010 1.3.6.1.4.1.9.1.2369 IE-4010-16S12P 1.3.6.1.4.1.9.1.2296 IE-5000-16S12P Catalyst IE5000 1.3.6.1.4.1.9.1.2233 IE-5000-12S12P-10G The following table lists the Meraki Switches and Meraki Managed Catalyst Switches that are supported for Switch Port based tracking through SNMP v2. Table 13: Meraki Switches and Meraki Managed Catalyst Switches System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.29671.2.338 MS120-8 Meraki MS120 1.3.6.1.4.1.29671.2.339 MS120-8LP 1.3.6.1.4.1.29671.2.340 MS120-8FP 1.3.6.1.4.1.29671.2.341 MS120-24 1.3.6.1.4.1.29671.2.342 MS120-24P 1.3.6.1.4.1.29671.2.343 MS120-48 1.3.6.1.4.1.29671.2.344 MS120-48LP 1.3.6.1.4.1.29671.2.356 MS120-48FP 1.3.6.1.4.1.29671.2.356 MS120-48FP 1.3.6.1.4.1.29671.2.371 MerakiMS125-24 Meraki MS125 1.3.6.1.4.1.29671.2.372 MerakiMS125-24P 1.3.6.1.4.1.29671.2.373 MerakiMS125-48 1.3.6.1.4.1.29671.2.374 MerakiMS125-48LP 1.3.6.1.4.1.29671.2.375 MerakiMS125-48FP Cisco Emergency Responder Version 15 Release Notes 24 Supported Voice Ready Lan Switches

System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.29671.2.346 MS210-24P Meraki MS210 1.3.6.1.4.1.29671.2.348 MS210-48LP 1.3.6.1.4.1.29671.2.345 MS210-24 1.3.6.1.4.1.29671.2.347 MS210-48 1.3.6.1.4.1.29671.2.349 MS210-48FP 1.3.6.1.4.1.29671.2.304 MerakiMS220-8 Meraki MS220 1.3.6.1.4.1.29671.2.305 MerakiMS220-8p 1.3.6.1.4.1.29671.2.306 MerakiMS220-24 1.3.6.1.4.1.29671.2.307 MerakiMS220-24p 1.3.6.1.4.1.29671.2.308 MerakiMS220-48 1.3.6.1.4.1.29671.2.309 MerakiMS220-48lp 1.3.6.1.4.1.29671.2.310 MerakiMS220-48fp 1.3.6.1.4.1.29671.2.328 MS225-24 Meraki MS225 1.3.6.1.4.1.29671.2.329 MS225-24p 1.3.6.1.4.1.29671.2.330 MS225-48 1.3.6.1.4.1.29671.2.331 MS225-48lp 1.3.6.1.4.1.29671.2.332 MS225-48fp 1.3.6.1.4.1.29671.2.333 MS250-24 Meraki MS250 1.3.6.1.4.1.29671.2.334 MS250-24p 1.3.6.1.4.1.29671.2.335 MS250-48 1.3.6.1.4.1.29671.2.336 MS250-48lp 1.3.6.1.4.1.29671.2.337 MS250-48fp 1.3.6.1.4.1.29671.2.311 MS320-24 Meraki MS320 1.3.6.1.4.1.29671.2.312 MS320-24p 1.3.6.1.4.1.29671.2.313 MS320-48 1.3.6.1.4.1.29671.2.314 MS320-48lp 1.3.6.1.4.1.29671.2.315 MS320-48fp Cisco Emergency Responder Version 15 Release Notes 25 Supported Voice Ready Lan Switches

System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.29671.2.318 MS350-24 Meraki MS350 1.3.6.1.4.1.29671.2.319 MS350-24p 1.3.6.1.4.1.29671.2.320 MS350-48 1.3.6.1.4.1.29671.2.321 MS350-48lp 1.3.6.1.4.1.29671.2.322 MS350-48fp 1.3.6.1.4.1.29671.2.327 MS350-24x 1.3.6.1.4.1.29671.2.357 MS355-24X Meraki MS355 1.3.6.1.4.1.29671.2.358 MS355-24X2 1.3.6.1.4.1.29671.2.359 Meraki MS355-48X 1.3.6.1.4.1.29671.2.360 Meraki MS355-48X2 1.3.6.1.4.1.29671.2.362 Meraki MS390-24-HW Meraki MS390 1.3.6.1.4.1.29671.2.363 Meraki MS390-24P-HW 1.3.6.1.4.1.29671.2.364 Meraki MS390-24U-HW 1.3.6.1.4.1.29671.2.365 Meraki MS390-24UX-HW 1.3.6.1.4.1.29671.2.366 Meraki MS390-48-HW 1.3.6.1.4.1.29671.2.367 Meraki MS390-48P-HW 1.3.6.1.4.1.29671.2.368 Meraki MS390-48U-HW 1.3.6.1.4.1.29671.2.369 Meraki MS390-48UX-HW 1.3.6.1.4.1.29671.2.370 Meraki MS390-48UX2-HW 1.3.6.1.4.1.29671.2.383 MerakiC9300-24T-M Meraki C9300 Supported Cisco Routers The following table lists the Cisco routers Emergency Responder supports. Cisco Emergency Responder Version 15 Release Notes 26 Supported Cisco Routers

Table 14: Supported Cisco Routers System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.1858 Cisco C891F-K9 Cisco 891 1.3.6.1.4.1.9.1.1859 Cisco C891FWA-K9 1.3.6.1.4.1.9.1.1860 Cisco C891FWE-K9 1.3.6.1.4.1.9.1.2443 Cisco C1111-8P Cisco 1100 1.3.6.1.4.1.9.1.2448 Cisco C1111-8PWA 1.3.6.1.4.1.9.1.2447 Cisco C1111-8PWB 1.3.6.1.4.1.9.1.2446 Cisco C1111-8PWE 1.3.6.1.4.1.9.1.904 Cisco 1861-SRST-B/K9 Cisco 1800 1.3.6.1.4.1.9.1.939 Cisco 1861-SRST-C-B/K9 1.3.6.1.4.1.9.1.940 Cisco 1861-SRST-C-F/K9 1.3.6.1.4.1.9.1.905 Cisco 1861-SRST-F/K9 1.3.6.1.4.1.9.1.902 Cisco 1861-UC-2BRI-K9 1.3.6.1.4.1.9.1.903 Cisco 1861-UC-4FXO-K9 1.3.6.1.4.1.9.1.1065 Cisco1861 1.3.6.1.4.1.9.1.1192 Cisco 1905 Cisco 1900 1.3.6.1.4.1.9.1.1191 Cisco 1921 1.3.6.1.4.1.9.1.1047 Cisco 1941 1.3.6.1.4.1.9.1.576 Cisco 2811 Cisco 2800 1.3.6.1.4.1.9.1.577 Cisco 2821 1.3.6.1.4.1.9.1.578 Cisco 2851 1.3.6.1.4.1.9.1.1045 Cisco 2911 Cisco 2900 1.3.6.1.4.1.9.1.1044 Cisco 2921 1.3.6.1.4.1.9.1.1043 Cisco 2951 1.3.6.1.4.1.9.1.543 Cisco 3825 Cisco 3800 1.3.6.1.4.1.9.1.544 Cisco 3845 Cisco Emergency Responder Version 15 Release Notes 27 Supported Cisco Routers

System Object ID from CISCO-PRODUCTS-MIB or CISCO-STACK-MIB Supported Device Series (Ethernet Ports Only) 1.3.6.1.4.1.9.1.1042 Cisco 3925 Cisco 3900 1.3.6.1.4.1.9.1.1144 Cisco 3925E 1.3.6.1.4.1.9.1.1041 Cisco 3945 1.3.6.1.4.1.9.1.1145 Cisco 3945E Supported Cisco UCS Platforms For information about supported Cisco Unified Computing System (UCS) platforms, see the Unified Communications Virtualization Supported Applications section of the Cisco Collaboration Virtualization wiki. VMware Support For information about VMware, see the Unified Communications VMWare Requirements section of the Cisco documentation wiki at https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/ virtualization-software-requirements.html. Supported OVAs and Capacity For information about OVAs, administrators should see the Virtualization for Cisco Emergency Responder (CER) at http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/ virtualization-cisco-emergency-responder.html. Related Documentation Cisco Emergency Responder Documentation See the publications for Cisco Emergency Responder. Navigate from the following documentation URL: https://www.cisco.com/c/en/us/support/unified-communications/emergency-responder/series.html Cisco Unified Communications Manager Documentation See the Cisco Unified Communications Manager Documentation Guide and other publications specific to your Cisco Unified Communications Manager release. Navigate from the following URL: https://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-callmanager/ series.html Important Notes Cisco Emergency Responder 15x Supported Upgrades Cisco Emergency Responder 10.x and later is supported on Cisco Unified Computing System (UCS) and other virtual platforms only. All existing installations on Media Convergence Servers (MCS) should be migrated to UCS before upgrading to Cisco Emergency Responder 10.x or later. Cisco Emergency Responder Version 15 Release Notes 28 Supported Cisco UCS Platforms

Direct Refresh Upgrades from Pre-12.5.x source to Release 15 and later is not supported. You should first upgrade your source to Release 12.5.x or 14 and SUs and then upgrade your source to Release 15 and later. Cisco Emergency Responder 15 and later does not support Install with Data Import. Note If the Emergency Responder source is in FIPS mode, see https://www.cisco.com/web/software/286319173/ 139477/ciscocm.ciscossl7_upgrade_CSCwa48315_CSCwa77974_v1.0.k4.cop-ReadMe.pdf for information on the COP file ciscocm.ciscossl7_upgrade_CSCwa48315_CSCwa77974_v1.0.k4.cop. This document details the pre-requisites required for direct upgrade to the 14SU2 or above destination versions. Note Direct upgrades to Cisco Emergency Responder 15 and later are supported only for the following releases: • Cisco Emergency Responder 12.5(1) or Cisco Emergency Responder 12.5(1a) or Cisco Emergency Responder 12.5(1) SU1 or Cisco Emergency Responder 12.5(1) SU2 or Cisco Emergency Responder 12.5(1) SU3 or Cisco Emergency Responder 12.5(1) SU4 or Cisco Emergency Responder 12.5(1) SU5 or Cisco Emergency Responder 12.5(1) SU6 or Cisco Emergency Responder 12.5(1) SU7 or Cisco Emergency Responder 12.5(1) SU8b or Cisco Emergency Responder 12.5(1) SU9 • Cisco Emergency Responder 14 or Cisco Emergency Responder 14SU1 or Cisco Emergency Responder 14SU2 or Cisco Emergency Responder 14SU3a or Cisco Emergency Responder 14SU4 COP Files Required for Upgrades to Release 15 and later Emergency Responder now improves the encryption for upgrading files. All COP and ISO upgrade files are now signed with the SHA1SUM hash-based signing tool. SHA-1 is now deprecated and has been superseded by SHA-2 (for example SHA-512). Post-Release 14, all new COP and ISO files are signed with the SHA512SUM hash-based signing tool. Table 15: Required COP Files for Upgrades to Emergency Responder Release 15 and later Upgrade Type To From Apply the required Upgrade Readiness COP File (pre-upgrade): ciscocm.cer_preUpgradeCheck-X.k4.cop.sha512. Note If you want to upgrade Emergency Responder from Release 12.5.x (except for Release 12.5(1)SU6) to 15 and later, you must use the following COP file: ciscocm.enable-sha512sum-2021-signing-key-v1.0.cop.sgn. There are no Direct Refresh Upgrade supported paths for Emergency Responder Release 15 and later. Refresh Upgrades from Pre-12.5.x source to Release 15 and later is not supported. Apply the required Upgrade Readiness COP Files (post-upgrade): ciscocm.cer_postUpgradeCheck-X.k4.cop.sha512. 15 12.5(1), 12.5(1a), 12.5(1) SU1, 12.5(1) SU2, 12.5(1) SU3, 12.5(1) SU4, 12.5(1) SU5, 12.5(1) SU6, 12.5(1)SU7, 12.5(1)SU8b, and 12.5(1)SU9 Cisco Emergency Responder Version 15 Release Notes 29 Cisco Emergency Responder 15x Supported Upgrades

Upgrade Type To From Apply the required Upgrade Readiness COP File (pre-upgrade): ciscocm.cer_preUpgradeCheck-X.k4.cop.sha512. Required COP files: • ciscocm.enable-sha512sum-2021-signing-key-v1.0.cop.sgn • ciscocm.cer_V14_CSCwf99494_Intracluster_v1.1.zip Note You should apply the following COP file for Release 14SU2 before upgrading your Emergency Responder to Release 15 and later: ciscocm.cer_V14SU2_CSCwc26596-CSCwc76921_C0173-1.zip. There are no Direct Refresh Upgrade supported paths for Emergency Responder Release 15 and later. Refresh Upgrades from Pre-12.5.x source to Release 15 and later is not supported. Apply the required Upgrade Readiness COP Files (post-upgrade): ciscocm.cer_postUpgradeCheck-X.k4.cop.sha512. 15 14, 14SU1, 14SU2, 14SU3a, and 14SU4 Table 16: Emergency Responder Release 15 VM Configuration Requirements Release 15 Requirements Previous Requirements Disk RAM vCPU Disk RAM vCPU OVA Types 80 GB 6 GB 2 80 GB 4 GB 1 20, 000 users 110 GB 6 GB 2 110 GB 6 GB 2 30, 000 users 110 GB 6 GB 4 110 GB 6 GB 4 40, 000 users In case you are planning to upgrade any of your 12.5.x or 14 and SUs Emergency Responder to Release 15 and later, note the following: • Deployments with 12,000 or 20,000 users having 4GB vRAM should increase the vRAM size to 6GB before upgrading to Release 15 and later. • Deployments with 20000 users having 1 vCPU should increase the vCPU to 2 before upgrading to Release 15 and later. Caveats This section contains information about accessing the Cisco Bug Search to find open caveats and resolved caveats. Access Cisco Bug Search Known problems (bugs) are graded according to severity level. These release notes contain descriptions of the following: • All severity level 1 or 2 bugs Cisco Emergency Responder Version 15 Release Notes 30 Caveats

• Significant severity level 3 bugs You can search for problems by using Cisco Bug Search. Before you begin To access Cisco Bug Search, you need the following items: • Internet connection • Web browser • Cisco.com user ID and password Procedure Step 1 To access Cisco Bug Search, go to: https://bst.cloudapps.cisco.com/bugsearch Step 2 Log in with your Cisco.com user ID and password. Step 3 To look for information about a specific problem, enter the bug ID number in the Search for field, then press Enter. Open Caveats Table 17: Open Caveats for Cisco Emergency Responder 15 Headline Identifier Cisco Emergency Responder SELinux protections missing in cliscript, remotesupport CSCwe26754 CER PSAP callback rings on all shared devices of a line CSCwi43358 CER incorrectly stores the deviceName prefix with sep for jabber soft clients CSCwi43352 Resolved Caveats Table 18: Resolved Caveats for Cisco Emergency Responder 15 Headline Identifier DRF mail alert notification not getting delivered CSCwd71121 ciphers configurations not taking effect CSCwd75779 SSO page is not loading properly CSCwd95902 Cisco Emergency Responder Version 15 Release Notes 31 Open Caveats

Headline Identifier CER incremental discovery broken due to concurrent modification exception CSCwe24363 CSV files are not validated for Onsite alert Name (Security name) CSCwf12786 ALI Formatting tool GUI formatting issue CSCwe61617 CER Hostname change leaves the cluster nodes not authenticated CSCwe89967 Import is failing when erl type is "National e911 service provider" CSCwe42854 CER OS Admin page redirecting to Internal IP address in UCMC/DI (NAT) environment CSCwc69440 CER Redsky Integration "Get level of service" in ERL not supported CSCwh29558 CER fails to update location for phones tracked via AXL incremental discovery CSCwh82026 CER 14SU2 not handling 503 error from Intrado CSCwd56980 Intermediate and/or root CA certs may get deleted after upgrade to 14 SU2 CSCwc76921 Validate_Network Module in Diagnose tool throws error after upgrade to 14 SU3 CSCwf99494 utils diagnose test output stuck at "test - tomcat" CSCwc41268 Smart license registration fails for proxy transport setting CSCwc85872 HTTP Headers Missing SameSite=Strict in Emergency Responder CSCwe04145 Cisco Emergency Responder Version 15 Release Notes 32 Resolved Caveats