Document Metadata
Format: PDF
Title: Poly VVX D230 DECT IP Phone Administrator Guide
Author: Plantronics, Inc. (Poly — formerly Plantronics and Polycom)
Creator: FrameMaker 2017
Page 1
7.1.0 | July 2020 | 3725-49216-002A
ADMINISTRATOR GUIDE
GETTING HELP
For more information about installing, configuring, and
administering Poly/Polycom products or services, go to
Polycom Support.
Plantronics, Inc. (Poly – formerly Plantronics and Polycom)
345 Encinal Street
Santa Cruz, California
95060
© 2020 Plantronics, Inc. All rights reserved. Poly, the
propeller design, and the Poly logo are trademarks of
Plantronics, Inc. All other trademarks are the property of
their respective owners.
VVX D230 DECT IP Phone
Page 2
1
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Audience, Purpose, and Required Skills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Related Poly and Partner Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
System Configuration Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Canonical Fashion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Literal Fashion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Boolean Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Multiple Choice Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Parameter Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
XML Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
VVX D230 DECT IP Phone Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Hardware Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
LED Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Power the Base Station On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Power the Handset Charger On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Set Up Ethernet and PC Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Pair Handsets to Base Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Access the System Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Configure the Primary Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Configuration and Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Configure Your D230 With the System Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Access the System Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Make Changes With the System Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Configuring VVX D230 with the Setup Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Configure the Base Station with the Setup Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Configuring VVX D230 With the IVR System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Configure Basic Settings With IVR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Configure System Settings With IVR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Configure Network Settings With IVR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Configure SIP Service Provider Settings With IVR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Configure OBiTALK Settings With IVR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Star Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Set the Star Code Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Program a Star Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Preprogrammed Star Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Page 3
2
System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Codec Profile Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Select a Codec for an SPn Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Select a Codec for OBiTALK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Select a Codec for a Page Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Set a Tone Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Tone Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Dial Tone Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Busy Tone Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Prompt Tone Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
SIT Tone Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Stutter Tone Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Distinctive Ring Tones and Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Set Ring Tones and Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Preloaded Ringtones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Group Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Enable Group Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Enable Handset Group Page Auto Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Set the Page Group Interruption Priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Show the Call Forwarding Contact in the Diversion Header . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Default DHCP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
DNS NAPTR Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Enable NAPTR Lookup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Enable Cisco Discovery Protocol (CDP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Call Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Local Call Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Enable Local Call Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Set the Call Park Pickup Prefix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Enable Call Hold Transfer to Call Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
View Local Call Park Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Enable Local Call Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Enable Network-Based Call Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Enable Music on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Enable Generic Network Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Configure SRTP Crypto Suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Page 4
3
Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Local Mixing or Bridging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
External Conference Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Enable an External Conference Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Add a Participant to the Conference Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Third-Party Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
BroadSoft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
BroadSoft AS-Feature-Event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Configure BroadSoft AS-Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Configure Call Forward All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Configure Call Forward Busy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Configure Call Forward No Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Configure Do Not Disturb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
BroadSoft XSI Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Network Directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Enable Network Directory Access on the Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Access a Network Directory From the Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Search or Download a Generic Network Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Call Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Inbound Call Route Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Edit the Inbound Call Route Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Outbound Call Route Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Edit the Outbound Call Route Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Multiline Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Assign Inbound Call Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Assign Outbound Call Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Back Up and Restore Your Base Station Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Back Up Your Base Station Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Restore Your Base Station Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Share Your Base Station Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Firmware Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Possible Error Messages on Firmware Update Failure . . . . . . . . . . . . . . . . . . . . . . . 53
Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Save the Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Erase the Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Remove Calls From Parking Lot Status List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Page 5
4
Extract PCAP Capture Result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
System Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Activate Syslog Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Include Detailed SIP Messages in Syslog Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
SPn Service Status Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Factory Resetting Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Factory Reset Your D230 Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Factory Reset Your D230 Base Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Page 6
5
Before You Begin
This guide describes how to administer, configure, and provision VVX D230 devices, focusing on the D230
DECT IP phone base station. For information specific to using the D230 DECT IP phone handset, see D230
DECT IP Phone User Guide.
Audience, Purpose, and Required Skills
This guide is for a technical audience. You must be familiar with the following concepts before beginning:
●
Current telecommunications practices, protocols, and principles
●
Telecommunication basics, audio teleconferencing, and voice or data equipment
●
OpenSIP networks and VoIP endpoint environments
Related Poly and Partner Resources
See the following sites for information related to this release.
●
The Poly Online Support Center is the entry point to online product, service, and solution support
information including Licensing & Product Registration, Self-Service, Account Management,
Product-Related Legal Notices, and Documents & Software downloads.
●
The Polycom Document Library provides support documentation for active products, services, and
solutions. The documentation displays in responsive HTML5 format so that you can easily access
and view installation, configuration, or administration content from any online device.
●
The Poly Community provides access to the latest developer and support information. Create an
account to access Poly support personnel and participate in developer and support forums. You can
find the latest information on hardware, software, and partner solutions topics, share ideas, and solve
problems with your colleagues.
●
The Poly Partner Network are industry leaders who natively integrate the Poly standards-based
RealPresence Platform with their customers' current UC infrastructures, making it easy for you to
communicate face-to-face with the applications and devices you use every day.
●
The Polycom Collaboration Services help your business succeed and get the most out of your
investment through the benefits of collaboration.
System Configuration Parameters
This guide provides system configuration parameters and their values in the following formats:
●
Canonical fashion
●
Literal fashion
Page 7
Before You Begin
6
Both notational conventions point to the same parameters, but their appearances are different.
The canonical fashion simplifies locating parameters on your device’s system web interface, the PDMS-SP
service, or in the Polycom Obihai Data Model, which is a collective list of configuration parameters,
syntaxes, and valid values for VVX D230.
Canonical Fashion
This example shows the format of the canonical fashion.
●
Parameter Group Name::ParameterName = Parameter Value
{replace-with-actual-value}
The Parameter Group Name is the heading of the parameter group on the left side panel of the
device’s system web interface or the PDMS-SP service web page. This string may contain spaces.
When a group heading has more than one level, a – separates each level, such as:
●
Services Providers – ITSP Profile A – SIP:
The ParameterName is the name of the parameter as shown on the web page and mustn’t contain
any spaces. Parameter Group Name and ParameterName are separated by two colons (::), as
shown in the first example.
The Parameter Value is the literal value to assign to the named parameter and may contain spaces.
You can omit Parameter Group Name or its top-level headings when the context is clear. For example:
●
SP1 Service::AuthUserName = 4082224312
●
ITSP Profile A – SIP::ProxyServer = sip.myserviceprovider.com
●
ProxyServerPort = 5082
Literal Fashion
These examples show the format of the literal fashion. Use the literal fashion when provisioning systems.
●
ParameterGroupName.ParameterName.Parameter Value {replace-with-actual-value}
●
Parameter.Group.Name.ParameterGroupName.ParameterName.Parameter Value
The ParameterGroupName. is the name of the first parameter group in literal fashion. This string
mustn’t contain any spaces, and always ends with a period, as shown. You can use more than one
ParameterGroupName. The ParameterGroupName. is case-sensitive.
The ParameterName. is the name of the parameter, and always ends with a period, as shown. This
string mustn’t contain any spaces. The ParameterName. is case-sensitive.
The Parameter Value is the literal value to assign to the named parameter and can contain spaces. The
Parameter Value isn’t case-sensitive, but it must exactly match the value when one or more choices are
available.
When using the literal fashion in your XML, you need to exactly match the text string for
ParameterGroupName.ParameterName.Parameter Value, but text formatting such as bold face isn’t
required and is removed when your script or app is processed.
Boolean Values
Parameters that take a Boolean value have a check box next to the parameter name on your system web
interface pages.Throughout the document, we refer to a Boolean value as “enable or disable” or “yes or no”,
Page 8
Before You Begin
7
but the only valid Boolean parameter values to use in a phone configuration file is either true/false or
True/False (case-sensitive). This is equivalent to selecting or clearing the check box on the configuration
web pages.
Multiple Choice Values
You must provision parameters that take one of several valid options from a drop-down menu on the
configuration message with string values that match exactly one of those choices. Otherwise, the system
uses the default choice. Matching the provisioned value against valid strings is case-sensitive and doesn’t
allow extra spaces.
Parameter Values
When entering a parameter value from the web page or via provisioning, avoid adding extra white spaces
before or after the parameter value. If the value is a comma-separated list of strings or contains attributes
after a comma or semicolon, avoid adding extra white space before and after the delimiter.
For example: CertainParameter = 1,2,3,4;a;b;c
If a parameter value can include white spaces, such as X_STUNServerPort, use just a single space and
no extra space before and after the value.
For example: X_STUNServerPort = UDP listen port of the STUN Server
XML Usage
When you write or edit XML for your VVX D230 system, use an XML editor that automatically checks your
syntax.
You can also use the template for the VVX D230 Obihai Data Model to get started.
Page 9
8
Getting Started
The VVX D230 DECT IP phones are standalone IP-based wireless phone systems that enable you to
manage your calls when you’re away from your desk. The system consists of a base station with support
for up to 10 handsets. This section includes overview information on using the VVX D230 system.
VVX D230 DECT IP Phone Overview
VVX D230 phones support Polycom HD Voice technology. You can manage the local interface and network
interaction on VVX D230 systems directly from the PDMS-SP service or through the system web interface.
VVX D230 systems implement the following features and functionalities:
●
Aggregation and bridging of eight SIP accounts
●
Recursive digit maps and associated call routing (outbound and inbound)
●
Support for all standard SIP-based IP PBX and ITSPs/VSPs
●
Cloud management enabled via the PDMS-SP service with both a user portal and an ITSP partner
portal
●
VoIP network management for endpoint devices and applications
●
High-quality voice encoding using G.711, G.722, G.726, G.729, iLBC, and Opus codecs
●
Registration of 10 handsets on a single base station
Hardware Summary
Your VVX D230 system consists of these components:
●
Base station, which interfaces with between one and 10 handsets, and connects to Ethernet for VoIP
communications, and has one charger slot for storing and charging a handset.
●
Handsets, which provide the user-to-base station interface, allowing voice communication and some
system interaction.
●
Handset chargers, which provide one charger slot for storing and charging a handset.
●
Power adapters, which power the base station and handset chargers.
In this guide, the terms “base station” and “handset” refer to those individual components. The term “system”
refers to the base station and handset together.
LED Status Indicators
VVX D230 systems contain one LED and one pushbutton on the base station, and one LED on the handset.
This table describes the system’s base station LED behavior and status information.
Page 10
Getting Started
9
Power the Base Station On and Off
The VVX D230 base station turns on when you plug it into a power source such as Power over Ethernet
(PoE). Connect the power adapter to the base station if PoE isn’t available.
Don’t use the 5V adapter when you use PoE with your VVX D230 base station.
To power the base station on and off:
»
Plug an Ethernet cable into the Ethernet port on the base station. If the base station powers on, you
have PoE, and the base station automatically obtains an IP address via DHCP.
If the base station doesn’t power on, connect its 5V power adapter.
Use only the 5V adapter supplied with the original packaging to power the base station if PoE isn’t
available. Using any other adapter voids the warranty and may cause the unit to malfunction.
Power the Handset Charger On and Off
The VVX D230 handset charger turns on when you plug in its 5V adapter.
To power the handset charger on and off:
»
Plug in the handset charger’s 5V adapter, and place the handset in the charger.
Use only the 5V adapter supplied with the original packaging to power the handset. Using any other adapter
voids the warranty and may cause the unit to malfunction.
Set Up Ethernet and PC Connections
By default, when you connect your base station to an internet router or Ethernet switch, it obtains an IP
address, a DNS, and an internet (LAN) gateway IP address via DHCP.
VVX D230 LED Status Indicators
Component
Indicator
Status
Base Station
Solid red
Powering on
On
Idle
Blinking red
Waiting for network availability—on for 1 second and off for 1 second
Locating a handset—on for 1 second and off for 1 second
Registering a handset—on for 2 seconds and off for 1 second
Handset
Blinking red
Incoming call
Missed call
New voicemail
Page 11
Getting Started
10
To connect to Ethernet and a PC:
1
Plug an Ethernet cable into the Ethernet port on the base station. If the base station powers on, you
have PoE, and the base station automatically obtains an IP address via DHCP.
If the base station doesn’t power on, connect its 5V power adapter.
2
Optionally, connect your PC to the base station’s PC port.
Pair Handsets to Base Stations
Before you use your D230 system, you need to pair your handsets to your base station. You can do this
before you provision your lines. You can pair up to 10 handsets per base station.
Your base station supports up to seven active calls.
To pair your handsets to your base station:
1
On the handset, choose Menu > Settings > Registration.
2
Select Register.
3
Press and hold the base station’s Find button for 5 seconds.
4
On the handset, choose Yes to confirm registration.
5
Repeat for each handset.
Access the System Web Interface
After pairing a handset to your base station, use the system web interface to configure and make changes
to your system.
To access the system web interface:
1
On the handset, choose Menu > Settings > Basestation Info. The base station’s IP address
displays.
2
Enter the base station’s IP address in a local PC web browser.
3
When prompted, enter the user name and the password.
The default user name is admin, and the default password is admin.
Configure the Primary Line
The primary line is the default service used to make calls when not using an explicit access code prefix.
The primary line offers these services:
●
SP1–8 Service: SIP-based service. By default, the primary line is SP1.
●
OBiTalk Service: Peer-to-peer service provided free with all system models.
Your handset can simultaneously manage two calls maximum.
Page 12
Getting Started
11
To configure the primary line:
1
Contact your service provider to get the values for these parameters:
2
From the system web interface, go to Service Providers > ITSP ProviderN > SIP.
3
In the Default column, uncheck the boxes for the ProxyServer and RegisterServer
parameters.
4
Enter the values from your service provider for the ProxyServer and RegisterServer
parameters.
5
Click Submit.
6
Go to Voice Services > SPn Service.
7
In the Default column, uncheck the box for the X_DisplayNumber parameter.
8
Enter the value from your service provider for the X_DisplayNumber parameter.
9
Optionally, click Submit.
10 Scroll down to SIP Credentials.
11 In the Default column, uncheck the boxes for the AuthUserName and AuthPassword
parameters.
12 Enter the values from your service provider for the AuthUserName and AuthPassword
parameters.
13 Click Submit.
14 Click Reboot.
SP Configuration Parameters
Service Provider Parameter
D230 Parameter Name
Notes
Proxy server
ProxyServer
Proxy server for your service provider
Registrar server
RegistrarServer
Registrar server for your service provider
SIP account number
X_DisplayNumber
Account number (phone number)
User name
AuthUserName
SIP account user name
User password
AuthPassword
SIP account password
Page 13
12
Configuration and Management
Your VVX D230 system provides the following options to configure and manage your system:
●
System web interface
●
Interactive voice response (IVR) system
●
Remote provisioning
Configure Your D230 With the System Web
Interface
You can access the D230’s system web interface from a PC using a web browser. Although all popular
browsers are tested for compatibility with the system web interface, some inconsistencies may arise from
time to time. Contact obi.spsupport@polycom.com if you have any questions about the system web
interface and how it appears in your browser window.
Access the System Web Interface
You can access the system web interface to see settings on your D230 system.
To access the system web interface:
1
Connect your base station to the LAN.
2
Dial * * * from the handset to access the Config Attendant.
3
Choose 1 to hear the IP address of the system read back to you. Write this down.
4
Enter the system IP address in a local PC web browser.
5
When prompted, enter the user name and the password.
The default user name is admin, and the default password is admin.
Make Changes With the System Web Interface
You can configure and make changes to your D230 system with the system web interface.
You must submit every configuration page after you make changes on the page. Otherwise, those
changes are discarded once you go to another page. Many changes also require you to reboot
the unit. However, you can reboot the unit just once after you make and submit all your changes
on all the pages.
Page 14
Configuration and Management
13
To make changes with the system web interface:
1
Access the system web interface.
2
Go to the page containing the parameter you want to change.
3
Enter your changes in the system web interface.
Always click the Submit button to save your changes before going to another page.
A message displays when a system reboot is required. When you finish making changes, click
Reboot.
Configuring VVX D230 with the Setup Wizard
The Setup Wizard web page provides a convenient way to set basic system parameters on your D230 base
station.
You can change the following parameters from the Setup Wizard page:
Setup Wizard Parameters
Parameter
Description
System Management
LocalTimeZone
Local time zone.
AdminPassword
Administrator password is case-sensitive and can contain uppercase and
lowercase letters, numerals, and special characters.
Note: If the default password is set, a warning message displays in the top-right
corner of the web page.
ITSP x Profiles (for x = ITSP A through ITSP D). Note: Your system has ITSP A – H.
ITSP x SignalingProtocol
Signaling protocols for this ITSP. Choose from:
•
SIP
•
Google Voice
ITSP x SIP ProxyServer
Host name or IP address of the SIP proxy server.
ITSP x SIP ProxyServerPort
Destination port to connect to the SIP server. Don’t choose a port at random.
ITSP x DigitMap
A digit map to restrict the numbers that can be dialed or called with this service.
Maximum length is 511 characters.
Outbound Calls (for Phone1 and Phone2)
Phone1 PrimaryLine
This parameter indicates to your handset which voice service is considered as
the primary line when dialing out from your system.
Phone1 DigitMap
Digit map to limit dialable numbers on this handset.
Phone1 OutboundCallRoute
Routing rule for outbound calls made via this handset.
Attendant PrimaryLine
This parameter indicates to your handset which voice service is considered as
the primary line when using the Auto Attendant.
Voice Services (for n = SP1 through SP4, and OBi). Note: Your system has SP1 – 8.
Page 15
Configuration and Management
14
Configure the Base Station with the Setup Wizard
You can use the Setup Wizard to configure some common parameters on your base station quickly.
To configure your base station with the Setup Wizard:
1
In the system web interface, go to Setup Wizard.
2
In the Default column, uncheck the boxes for the parameters you want to configure.
3
In the Value column for these parameters, enter your values. Record these values for future use
such as for troubleshooting.
4
Click Submit.
5
Click Reboot to reboot your system.
Configuring VVX D230 With the IVR System
Your VVX D230 system uses the IVR system for both its configuration and normal functionality. Access the
IVR system using the handset to receive verbal prompts and information from the system.
Note the following information regarding the IVR system:
●
If a setting change requires a reboot, your VVX D230 reboots automatically when you quit the IVR
system.
●
You can access the next menu of the IVR system or invoke a command without waiting for the
previous announcement to end.
Configure Basic Settings With IVR
Use the IVR system’s main menu to configure your VVX D230’s basic settings or to access additional
configuration menus.
SPn X_ServProvProfile (ITSP
Profile)
Selects a Service Provider profile for this service. Choices are A, B, C, D, E, F, G,
or H.
SPn AuthUserName
User name used to authenticate the connection to the server.
SPn AuthPassword
Password used to authenticate the connection to the server.
SPn URI
See the description of the URI parameter for more details and examples.
SPn InboundCallRoute
Routing rule for inbound calls on this trunk.
OBiTALK InboundCallRoute
Routing rule for directing incoming calls on this service. The default rule is to
send all incoming calls to the handset (dtn).
POTS-line InboundCallRoute
Routing rule for directing incoming land line (POTS) calls.
Setup Wizard Parameters (continued)
Parameter
Description
Page 16
Configuration and Management
15
To configure basic settings with IVR:
1
Dial *** from the handset.
2
Enter the number for the configuration menu you want to access.
Integrated Voice Response Operations
Menu Selection
Setting
Description
1
Basic Network Status
System IP address and DHCP status.
2
Advanced Network Status
Information on the primary and back-up DNS
server and primary and back-up NTP server.
3
Set DHCP
Current DHCP value.
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
4
Set IP Address
Current IP address.
Note: If you enter a new value (static IP
address), you disable DHCP.
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
5
Set Password
Current IVR password.
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
6
Software Update
The system plays one of the following
messages:
•
Software update available. Press 1 to
update software.
•
Software update not available.
If an update is available, press 1 to update the
software. The software update process starts
as soon as you hang up.
Warning: Once the software upgrade process
starts, your base station’s power LED blinks
rapidly. Make sure the power and network
cable stay connected to the unit until the
process is complete.
8
Restore Factory Default
Restores the system to factory default
settings.
•
Press 1 to confirm the factory restore.
•
Press # to return to the main configuration
menu.
•
Press # # to exit the IVR system.
Page 17
Configuration and Management
16
Configure System Settings With IVR
Configure system options through the system settings submenu. Note that the handset doesn’t announce
the available settings in the submenu.
To configure system settings with IVR:
1
Dial ***0 from the handset.
2
Enter the number for the configuration menu you want to access, followed by the # key.
9
Reboot
Reboots the system.
•
Press 1 to confirm system reboot.
•
Press # to return to the main configuration
menu.
•
Press # # or hang up to exit the IVR
system.
0
Additional Options
Access other configuration settings.
System Settings Submenus
Menu
Selection
Setting
Description
1
Firmware Version
Current firmware version.
•
Press 0 to repeat the information.
•
Press # to enter another configuration menu
selection.
2
IVR Password
Current IVR password.
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
3
Debug Level
Current debug level.
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
Integrated Voice Response Operations (continued)
Menu Selection
Setting
Description
Page 18
Configuration and Management
17
Configure Network Settings With IVR
Configure network options through the network settings submenu.
To configure network settings with IVR:
1
Dial ***0 from the handset.
2
Enter the number for the configuration menu you want to access, followed by the # key.
4
Syslog Server IP Address
Current syslog server IP address.
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
5
Syslog Server Port
Current syslog server port value.
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value of 514.
•
Press # to enter another configuration menu
selection.
WAN Settings Options
Menu Selection
Setting
Description
20
DHCP Configuration
Current DHCP configuration value.
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
21
IP Address
Current IP address.
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
System Settings Submenus (continued)
Menu
Selection
Setting
Description
Page 19
Configuration and Management
18
Configure SIP Service Provider Settings With IVR
Configure SIP service provider options through the SIP service provider settings submenu.
22
Default Gateway
Current default internet gateway.
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
23
Subnet Mask
Current subnet mask.
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
24
DNS Server (Primary)
Current primary DNS server.
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
25
LLDP Discovery (Enable/Disable)
Current LLDP Discovery configuration value.
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
Press # to enter another configuration menu
selection.
26
NTP Server (Primary)
Current primary NTP server.
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
27
CDP (Enable/Disable)
Common values included in CDP broadcast
messages are:
•
System Type and Model
•
Duplex/Speed Setting
•
VLAN Setting
•
PoE Class (Power Draw).
WAN Settings Options (continued)
Menu Selection
Setting
Description
Page 20
Configuration and Management
19
To configure SIP service provider settings with IVR:
1
Dial ***0 from the handset.
2
Enter the number for the configuration menu you want to access, followed by the # key.
SP1 Configuration Settings
Menu Selection
Setting
Description
100
Enable Service Provider One (SP1)
Current SP1 value.
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration
menu selection.
101
Registration State of SP1
SP1 registration state.
•
Press 0 to repeat the information.
•
Press # to enter another configuration
menu selection.
102
SP1 User ID
SP1 user ID value.
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration
menu selection.
167
SP1 Block Caller ID Enable
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration
menu selection.
168
SP1 Block Anonymous Call Enable
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration
menu selection.
172
SP1 Call Forward ALL – Enable / Disable
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration
menu selection.
173
SP1 Call Forward ALL Number
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration
menu selection.
Page 21
Configuration and Management
20
174
SP1 Call Forward on Busy – Enable /
Disable
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration
menu selection.
175
SP1 Call Forward on Busy Number
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration
menu selection.
176
SP1 Call Forward on No Answer – Enable /
Disable
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration
menu selection.
177
SP1 Call Forward on No Answer Number
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration
menu selection.
SP2 Configuration Settings
Menu Selection
Setting
Description
200
Enable Service Provider Two SP2.
Current SP2 value.
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
201
Registration State of SP2
SP2 registration state.
•
Press 0 to repeat the information.
•
Press # to enter another configuration menu
selection.
202
SP2 User ID
SP2 user ID value.
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
SP1 Configuration Settings (continued)
Menu Selection
Setting
Description
Page 22
Configuration and Management
21
267
SP2 Block Caller ID Enable
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
268
SP2 Block Anonymous Call Enable
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
272
SP2 Call Forward ALL – Enable / Disable
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
273
SP2 Call Forward ALL Number
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
274
SP2 Call Forward on Busy – Enable /
Disable
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
275
SP2 Call Forward on Busy Number
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
276
SP2 Call Forward on No Answer – Enable /
Disable
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
277
SP2 Call Forward on No Answer Number
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
SP2 Configuration Settings (continued)
Menu Selection
Setting
Description
Page 23
Configuration and Management
22
Configure OBiTALK Settings With IVR
You can configure OBiTALK options through the OBiTALK settings submenu.
To configure OBiTALK settings with IVR:
1
Dial ***0 from the handset.
2
Enter the number for the configuration menu you want to access, followed by the # key.
OBiTALK Service Options
Menu Selection
Setting
Description
900
Enable OBiTALK Service
Current OBiTALK service value.
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
901
Registration State of OBiTALK
OBiTALK registration state.
•
Press 0 to repeat the information.
•
Press # to enter another configuration menu
selection.
967
OBiTALK Block Caller ID Enable
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
968
OBiTALK Block Anonymous Call Enable
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
972
OBiTALK Call Forward ALL – Enable /
Disable
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
973
OBiTALK Call Forward ALL Number
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
Page 24
Configuration and Management
23
974
OBiTALK Call Forward on Busy – Enable /
Disable
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
975
OBiTALK Call Forward on Busy Number
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
976
OBiTALK Call Forward on No Answer –
Enable / Disable
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
977
OBiTALK Call Forward on No Answer
Number
•
Press 0 to repeat the information.
•
Press 1 to enter a new value.
•
Press 2 to set the default value.
•
Press # to enter another configuration menu
selection.
OBiTALK Service Options (continued)
Menu Selection
Setting
Description
Page 25
24
Star Codes
Star codes are short sequences of digits that serve as a command to your system to perform certain
operations. Each sequence usually starts with the star (*) key followed by a 2-digit code (such as *69).
You can use star codes to set the value of one or more configuration parameters. VVX D230 allows you to
issue a star code from the handset only. A short star code script parameter defines each star code and its
operation.
A star code script contains a number of predefined variables and actions. Each variable represents one or
a group of configuration parameters. An action can be checking or setting a variable’s value, collecting a
phone number, or calling a certain number.
The set of star codes that you can dial from the handset is a star code profile. VVX D230 has two star code
profiles available in its configuration known as Star Code Profile A and Star Code Profile B. Each profile has
30 star code script parameters known as Code1 to Code30. The default star codes in both Star Code Profiles
match the standard telephone provider star codes.
Find more information on star codes in the VVX D230 DECT IP Phone Technical Reference on the Poly
Online Support Center. See a list of star code parameters in the VVX D230 Data Model.
Set the Star Code Profile
You can select a Star Code Profile (A, B, or None) for interpreting the star codes users enter on the phone.
To set the star code profile:
1
In the system web interface, go to DECT Wireless > Handsetn
2
In the Default column, clear the check box for the StarCodeProfile parameter.
3
In the Value column for the StarCodeProfile parameter, select A or B, or None if star codes aren’t
used.
4
Click Submit.
5
Reboot your system when you complete your changes.
Program a Star Code
You can program star codes for any enabled feature in addition to the default star codes available on VVX
D230.
To program a star code:
1
In the system web interface, go to Star Codes > Star Code Profile N.
Page 26
Star Codes
25
2
In the Default column, clear the check box for a Parameter Name with an empty value column.
3
In the Value column, enter a star code script in the following format: code, name, action1
For example, for Code30, the star code script is *01, Page Group 1 Talk, pg1tx. Using the star code
*01 will send a page to Group 1.
4
Click Submit.
5
Reboot your system when you complete your changes.
Preprogrammed Star Codes
Your system has the following star codes preprogrammed.
Preprogrammed Star Codes
Code
Description
*03
Request peer system to loop back media in the next outbound call
*04
Request peer system to loop back RTP packets in the next outbound call
*05
Tell system to periodically redial the last called number until the called party rings or answers
*06
Cancel the last repeat dial request
*07
Redial
*10
Day Mode
*11
Night Mode
*12
Auto Night Mode
*56
Enable Call Waiting
*57
Disable Call Waiting
*60
Call Forward on Busy (Enter Number + #)
*61
Disable Call Forward in Busy
*62
Call Forward on No Answer (Enter Number + #)
*63
Disable Call Forward No Answer
*66
Repeat Dial
*67
Block Caller ID (One Time)
*68
Unblock Caller ID (One Time)
*69
Call Return
*72
Call Forward All (Enter Number + #)
*73
Disable Call Forward All
*74
Set Speed Dial
Page 27
Star Codes
26
*75
Check Speed Dial
*76
Clear Speed Dial
*77
Block Anonymous Calls
*78
Do Not Disturb – Turn On
*79
Do Not Disturb – Disable
*81
Block Caller ID (Persistent Mode)
*82
Unblock Caller ID (Persistent Mode)
*86
Block Last Caller
*87
Unblock Anonymous Calls
*96
Barge In
*98
Blind Transfer
*4678
Use Opus Only on the next outbound call
*4711
Use G711 Only on the next outbound call
*4722
Use G722 Only on the next outbound call
*4729
Use G729 Only on the next outbound call
Preprogrammed Star Codes (continued)
Code
Description
Page 28
27
System Settings
You can control system codec features, handset tones, and ring tones on your D230 base station. You also
can control how handsets dial calls using speed dial numbers and user-defined digit maps.
Codec Profile Features
Codecs define the digital process your system uses to encode and decode communications with other
systems. You can set codec profiles in three places:
●
SPn Service
●
OBiTALK Service Settings
●
Page Groups
Your system provides two codec profiles (A and B), selectable per trunk (SPn and OBiTALK).
For more information on codec profile parameters, see the VVX D230 Data Model.
Select a Codec for an SPn Service
You can select a codec as the preferred codec for an SPn service.
To select a preferred codec on an SPn service:
1
In the system web interface, go to Voice Services > SPn Service (where n is the SP service whose
codec you want to specify).
2
In the Value column for the X_CodecProfile parameter, choose the codec profile (A or B) you
want to use for this service.
3
Click Submit. Reboot your system when you complete your changes.
4
When reboot completes, go to Codecs > Codec Profile A or Codec Profile B (the codec profile
you chose).
5
In the Default column, uncheck the box for the Priority parameter for the codec you want to use.
6
In the Value column for the Priority parameter, set this parameter to 1.
7
Click Submit. Reboot your system when you complete your changes.
Select a Codec for OBiTALK
You can select a codec as the preferred codec for OBiTALK.
Page 29
System Settings
28
To select a preferred codec on OBiTALK:
1
In the system web interface, go to Voice Services > OBiTALK Service.
2
In the Default column, uncheck the box for the CodecProfile parameter.
3
In the Value column for the CodecProfile parameter, choose the codec profile (A or B) you want
to use for the service.
4
Click Submit. Reboot your system when you complete your changes.
5
When reboot completes, go to Codecs > Codec Profile A or Codec Profile B (the codec you
chose).
6
In the Default column, uncheck the box for the Priority parameter for the codec you want to use.
7
In the Value column for the Priority parameter, set this parameter to 1.
8
Click Submit. Reboot your system when you complete your changes.
Select a Codec for a Page Group
You can select a codec as the preferred codec for a page group.
To select a preferred codec on a page group:
1
In the system web interface, go to Voice Services > Page Groups.
2
In the Default column for your chosen page group, uncheck the box for the AudioCodec
parameter.
3
In the Value column for the AudioCodec parameter, choose the codec you want to use for this
page group.
4
Click Submit. Reboot your system when you complete your changes.
5
When reboot completes, go to Codecs > Codec Profile A or Codec Profile B (the codec you
chose).
6
In the Default column, uncheck the box for the Priority parameter for the codec you want to use.
7
In the Value column for the Priority parameter, set this parameter to 1.
8
Click Submit. Reboot your system when you complete your changes.
When you set the priority for a codec in a codec profile, that setting applies for all places that use the codec
profile. For example, if you choose Codec Profile B for SP3 and OBiTALK, your codec priority applies to
both SP3 and OBiTALK.
Set a Tone Pattern
Tone patterns provide audible call progress indicators to the user. Your system enables you to create
customized tone patterns.
Tone Profile A default settings use North American telephone standards. Tone Profile B default
settings use Australian telephone standards. You can download tone profiles for other countries
from the OBiTALK forum.
Page 30
System Settings
29
To set a custom tone pattern:
1
In the system web interface, go to Tone Settings > Tone Profile A or Tone Profile B.
2
Choose a tone pattern. In its Default column, uncheck the box for its TonePattern parameter.
3
In the Value column for this TonePattern parameter, enter your new tone pattern.
4
Click Submit.
5
Click Reboot to complete your changes.
Tone Examples
These examples show the interpretation of a few common tone patterns:
Dial Tone Example
DIAL, "350-18,440-18"
A mixture of two frequency components generates the dial tone.
350 Hz at –18 dBm and 440 Hz at –18 dBm
The expiration time is infinite, and tone active time is infinite.
Busy Tone Example
BUSY, "480-18,620-18;10;(.5+.5)"
A mixture of two frequency components generates the busy tone.
480 Hz at –18 dBm and 620 Hz at –18 dBm
The expiration time is 10 seconds. It has only one cadence segment, which has tone active 0.5 second and
tone inactive 0.5 second.
Prompt Tone Example
PROMPT, "480-16;10"
A single frequency component generates the prompt tone.
480 Hz at –16 dBm. The expiration time is 10 seconds. It has only one cadence segment, which has tone
infinite active time.
SIT Tone Example
SIT_1, "985-16,1428-16,1777-16;20;(1/.380+0,2/.380+0,4/.380+0,0/0+4)"
A set of frequency components generates the special information tone (SIT).
●
First frequency: 985 Hz at –16 dBm
●
Second frequency: 1428 Hz at –16 dBm
●
Third frequency: 1777 Hz at –16 dBm
Page 31
System Settings
30
The expiration time is 20 seconds. It has only one cadence segment, which includes four on-off sections.
The segment has infinite repeating time:
●
The first on-off section: generated by the first frequency component, and it has 0.38 tone second
active time and 0 inactive time.
●
The second on-off section: generated by the second frequency component, and it has 0.38 tone
second active time and 0 inactive time.
●
The third on-off section: generated by the third frequency component, and it has 0.38 tone second
active time and 0 inactive time.
●
The fourth on-off section: only generates silence, since you specified no frequency component. It has
tone 0 second active time and 4 seconds inactive time.
Stutter Tone Example
STUTTER, "350-18,440-18;20;.2(.1+.1);()"
A mixture of two frequency components generates the stutter dial tone.
350 Hz at –18 dBm and 440 Hz at –18 dBm. The expiration time for the entire tone is exactly 20 seconds. It
has two cadence segments.
●
The first segment includes only one on-off section, on 0.1 second and off 0.1 second, and on-off
repeats for 2 seconds.
●
The second segment includes one on-off section, and has infinite repeating time and infinite tone
active time, and plays until the entire tone duration has elapsed.
For more information on Tone Profile A & B and call waiting parameters, see the VVX D230 Data Model.
Distinctive Ring Tones and Patterns
You can add Alert-Info to the SIP invite header to configure distinctive ringtones based on how you set
up incoming call parameters. In a SIP-based distinctive ring, the RingName is matched against the
Alert-Info of the form Alert-Info: http://127.0.0.1/ring-name, where ring-name is one of
the preloaded ringtones.
If there’s no Alert-Info, or if the specified ring-name doesn’t match any of the ring patterns, the handset
uses the ring tone configured in X_DefaultRing parameter under SPn Service.
Set Ring Tones and Patterns
You can set a distinctive ring tone and pattern for incoming calls on the lines on your handset. There are ten
ring tones and patterns for each ring profile.
To set a custom ring pattern:
1
In the system web interface, go to Ring Settings > Ring Profile A or Ring Profile B.
2
Choose a Call Waiting Tone X or Ring Pattern X.
3
In the Default column, uncheck the box for one of the following parameter groupings:
ToneName and TonePattern
Page 32
System Settings
31
RingName and RingType
4
In the Value column, enter your new ring pattern.
5
Click Submit.
6
Click Reboot to complete your changes.
Preloaded Ringtones
The handset can only play the following preloaded ringtones:
●
Handset Default
●
Type 2 - Low Trill
●
Type 3 - Medium Trill
●
Type 4 - High Trill
●
Type 5 - Highest Trill
●
Type 6 - Beeble
●
Type 7 - Triplet
●
Silent Ring
Group Paging
VVX D230 phones support 10 paging groups, group paging with UCS multicast group paging, and group
paging auto answer.
Enable Group Paging
You can enable your phones to connect to a Polycom UCS group page. When you connect to the UCS group
page, the assigned VVX D230 phone can send and receive audio on that page group.
Procedure
1
In the system web interface, go to Voice Services > Page Groups.
a
In the Default column, clear the check boxes for the Polycast and PolycastGroup
parameters.
b
In the Value column for Polycast, select the check box.
c
In the Value column for PolycastGroup, select the UCS page group you want to join.
2
Select Submit.
3
Reboot your phone.
Phones must use the same audio codec as the other phones in the UCS page group.
Page 33
System Settings
32
Enable Handset Group Page Auto Answer
You can configure handsets to automatically answer incoming group pages and intercom calls. You can
configure the handset to auto answer up to 10 different page groups.
Procedure
1
In the system web interface, go to DECT Wireless > Handsetn > Calling Features (where n is the
handset you want to configure).
a
In the Default column, clear the check box for the JoinPageGroup parameter for the page group
you want to join.
b
In the Value column for the JoinPageGroup parameter, select the check box.
2
Select Submit.
3
Reboot your phone.
Set the Page Group Interruption Priority
You can configure the priority settings to interrupt a call when receiving a page. This setting doesn’t stop
emergency pages from interrupting calls.
When calls are interrupted, the group page audio mixes with the call audio.
Procedure
1
In the system web interface, go to DECT Wireless > Handsetn > Calling Features (where n is the
handset you want to configure).
2
In the Value column for the PgDoNotInterrupt parameter, choose one of the following options:
Never - Allow pages to interrupt calls.
During Active Call - Ignore incoming pages during an active call.
Always - Ignore incoming pages.
3
Select Submit.
4
Reboot your phone.
Show the Call Forwarding Contact in the
Diversion Header
The call server uses the Diversion field with a SIP header to track call history. You can configure the
Diversion header to display who a forwarded call is from and the phone number that forwarded the call.
To show the call forwarding contact in the diversion header:
1
In the system web interface, go to Voice Services > SPN Service > Calling Features.
2
In the Default column, clear the check box for the X_ShowDiversion parameter.
3
Choose one of the following options:
Page 34
System Settings
33
Last - shows the last person who forwarded the call.
First - shows the first person who forwarded the call.
Off - doesn’t show the call forwarder.
4
Select Submit.
5
Reboot your phone.
Page 35
34
Network Settings
You can control how your D230 base station accesses the web and the network. Control features include:
●
Default DHCP Settings
●
DNS NAPTR Support
●
Enable Cisco Discovery Protocol (CDP)
Default DHCP Settings
When you initialize a network connection to a configuration server, your D230 extracts DHCP Option 160
from a DHCP offer by default. Your D230 also prioritizes DHCP Option 160 ahead of other options in the
ConfigURL parameter using the following parameters and macros:
●
Option 160 is added to the System Management > WAN Settings > DHCP Client
Settings::ExtraOptions parameter.
●
The System Management > Auto Provisioning > ITSP Provisioning::ConfigURL parameter
includes the $DHCPOPT160/$MAC.xml;$DHCPOPT160/$DM.xml;$DHCPOPT160;
tftp://$DHCPOPT66/$DM.xml;$DHCPOPT66/$DM.xml;$DHCPOPT66 macro string.
Don’t reconfigure this default setting.
DNS NAPTR Support
This feature enables DNS Name Authority Pointer (NAPTR) lookup for SIP proxy servers or outbound
proxies. Combining NAPTR with SRV records enables chaining multiple records. With NAPTR lookup, your
system can discover:
●
The hosts to access the SIP service for a given domain
●
The SIP transport, preference, and order of each host
●
The types of DNS records to use for each listed host (SRV or A record)
You can enable NAPTR for each ITSP Profile. If enabled, your system only attempts NAPTR lookup of the
domain name specified in the OutboundProxy parameter (if configured). Otherwise, your system uses the
ProxyServer parameter (on the corresponding ITSP Profile x > SIP web page).
If NAPTR records aren’t available, your system doesn’t fall back to perform regular DNS SRV or DNS A
record lookup.
If a NAPTR record indicates to look up the host name as an SRV record, your system considers the host
name to be complete and doesn’t add a prefix when querying the DNS server for its SRV record, regardless
of the settings of the X_DnsSrv and X_DnsSrvAutoPrefix parameters.
Page 36
Network Settings
35
When more than one UDP, TCP, or TLS option is available and all are at the same order and preference,
your system considers UDP the highest priority, then TCP, then TLS.
With NAPTR enabled, your system can fail over and fall back among UDP/TCP/TLS transports or change
to a different transport based on the result of each NAPTR lookup, which renews at half of the TTL value
from the DNS server.
This feature complies with RFC 2915.
Enable NAPTR Lookup
NAPTR lookup enables locating domains for mapping your system in the internet.
To enable NAPTR lookup:
1
In the system web interface, go to Service Providers > ITSP Profile x > SIP (where x is the ITSP
Profile where you want to enable NAPTR lookup).
2
In the Default column, uncheck the box for the X_DnsNAPTR parameter.
3
In the Value column for the X_DnsNAPTR parameter, check the box to set this parameter to True.
4
Optionally, set the X_ProxyServerRedundancy parameter to True.
In the Default column of the X_ProxyServerRedundancy parameter, uncheck the box for this
parameter.
In the Value column for the X_ProxyServerRedundancy parameter, check the box to set this
parameter to True.
5
Click Submit. Reboot your system when you complete your changes.
Enable Cisco Discovery Protocol (CDP)
This feature enables your systems to automatically configure VLAN and other network parameters using the
Cisco Discovery Protocol (CDP). CDP can coexist with LLDP-MED, but LLDP-MED always takes
precedence.
To enable CDP discovery:
1
In the system web interface, go to System Management > WAN Settings > Internet Settings.
2
Set the CDP parameter to True.
3
Click Submit. Reboot your system when you complete your changes.
Page 37
36
Call Features
You can configure call features in one of three ways:
●
A system-level feature applies to all calls on the system, regardless which line a call is on. For
example, call waiting is a system feature.
●
A line-level feature applies only to calls on a specific line. For example, server-based Do Not Disturb
(DND) and centralized conference are line-based features.
●
Some features can have both a system feature version and a line feature version.
For example, you can provision Call Park as a system feature for all calls and as a line feature for
each line for the SP services (SP1–SP8) and OBiTALK services.
For more information on call feature parameters, see the VVX D230 Data Model.
Local Call Park
Local call park is independent of Service Provider-based call park services, and it allows users to park calls
on a VVX D230 base station and retrieve calls from any handset registered to the base station. Local call
park (if enabled) takes preference over Service Provider-based call park.
The D230 base station provides this feature without relying on the service provider’s call park service. This
feature provides 99 call parking slots (numbered 00 to 99), and a base station can hold up to 10 parked calls
at a time.
Enable Local Call Park
You can configure local call park on the VVX D230 base station to enable users to park and retrieve calls
locally.
To enable local call park:
1
In the system web interface, go to DECT Wireless > System > Local Call Park.
2
In the Default column, clear the check box for the LocalCallPark parameter.
3
In the Value column for the LocalCallPark parameter, select the check box to set this parameter
to True.
4
Click Submit.
5
Reboot your system when you complete your changes.
When local call park is enabled, local call park status is also enabled and a new status page is shown on
the system web interface at Status – Parking Lot Status that shows the list of parked calls.
Page 38
Call Features
37
Set the Call Park Pickup Prefix
After users park a call, they can use a retrieval code that includes a pickup prefix and the parking slot number
to retrieve the call from the parking lot. For example, 7xx. The default pickup prefix is 7, but you can
configure the prefix in the system web interface.
To enable local call park:
1
In the system web interface, go to DECT Wireless > System > Local Call Park.
2
In the Default column, clear the check box for the PickupPrefix parameter.
3
In the Value column for the PickupPrefix parameter, select a prefix between 2 and 8.
4
Click Submit.
5
Reboot your system when you complete your changes.
Enable Call Hold Transfer to Call Park
For shared lines, you can enable the system to automatically convert a call hold into a call park. When a
user places a call on hold, the call is parked in an automatically selected parking lot instead of the normal
call hold function. This enables the user to park a call without knowing where the call is parked.
To enable call hold transfer to call park:
1
In the system web interface, go to DECT Wireless > System > Local Call Park and verify that call
park is enabled (LocalCallPark is set to True).
2
Go to Voice Services > SPn Service > Share Line Features, where n is any voice service
configured for your base station.
3
In the Default column, clear the check box for X_LocalShareHoldIsPark.
4
In the Value column of X_LocalShareHoldIsPark, check the box to set this parameter to True.
5
Click Submit.
6
Reboot your system when you complete your changes.
View Local Call Park Status
Enabling local call park also enables local call park status, which provides a parking lot status page on the
system web interface for your D230 base station. This page shows calls currently parked by handsets
registered to your base station, if any.
To see local call park status:
»
In the system web interface, go to Status > Parking Lot Status to see calls parked by the handsets
registered to your base station.
Page 39
Call Features
38
Enable Local Call Back
This feature enables your system to call you back after a given time when you park a call, preventing you
from leaving a call on hold indefinitely.
You can configure the following Call Back options:
●
CallBackTimer - The amount of time in seconds a call will sit in a parking slot before it is sent back
to the phone that parked the call.
●
CallBackMaxRetry - The number of attempts to return the call to the phone that parked it before
the call is released. Set to 0 or leave blank for unlimited attempts.
●
CallBackRingTimeOut - The amount of time in seconds between each call back attempt. If the
parameter CallBackMaxRetry is set to 1, the CallBackRingTimeOut doesn’t apply.
To enable local call back:
1
In the system web interface, go to DECT Wireless > System > Local Call Park.
2
In the Default column, clear the check box for the LocalCallPark, CallBackTimer,
CallBackMaxRetry, and CallBackRingTimeOut parameters.
3
In the Value column for LocalCallPark, check the box to enable this parameter (set to True).
4
In the Value columns for the CallBackTimer and CallBackRingTimeOut parameters, enter a
value in seconds for the parameters.
For example, if you set the value as 60 for both parameters, then parked calls will automatically call
back after 60 seconds and the call will ring for 60 seconds before timing out.
5
In the Value column for CallBackMaxRetry, enter a value for the parameter.
6
Click Submit. Reboot your system when you complete your changes if this is the first time you’ve
activated LocalCallPark.
Enable Network-Based Call Park
Network-based call park enables users to park calls to a monitored parking lot, and any users on the network
can retrieve a call from the parking lot.
To enable network-based call park:
1
In the system web interface, go to Service Providers > ITSP Profile N > SIP > Feature
Configuration (where N is the ITSP profile you want to configure).
a
In the Default column, clear the check box for the X_CallParkMethod,
X_DirectedCallPickupMethod, and X_CallParkStatusMethod parameters.
b
In the Value column, select an option for the X_CallParkMethod,
X_DirectedCallPickupMethod, and X_CallParkStatusMethod parameters.
2
Go to Voice Services > SPn Services > Network Provided Services (where n is the SP service
you want to configure).
a
In the Default column, clear the check boxes for the CallPark, CallParkStatus, and
CallParkExtensions parameters.
b
In the Value column, select the check box for CallPark and CallParkStatus.
Page 40
Call Features
39
c
In the Value column for CallParkExtensions, enter the park extensions you want to monitor,
separated by a comma.
For example, 100, 101.
3
Select Submit.
4
Reboot your phone.
Enable Music on Hold
When enabled, this feature plays music to all callers currently on hold. The music is stored internally and
isn’t user-configurable.
To enable music on hold:
1
In the system web interface, go to DECT Wireless > System > Local Call Park.
2
In the Default column, clear the check boxes for the LocalCallPark and the CallParkMusic
parameters.
3
In the Value columns for the LocalCallPark and the CallParkMusic parameters, check the
boxes to enable these parameters (set to True).
4
Click Submit. Reboot your system when you complete your changes if this is the first time you’ve
activated LocalCallPark.
Enable Generic Network Directory
This feature enables support for a remotely maintained network directory. All external enterprise directories
are still available.
To enable a personal or network directory:
1
In the system web interface, go to Voice Services > SPn Service > Network Directory Setup,
where n is any voice service configured for your base station.
2
In the Default column, clear the check boxes for the DirectoryType and URL parameters.
3
In the Value column of DirectoryType, choose a directory type.
For a local directory, choose Personal.
For a directory shared within your company, choose Group Common or Enterprise Common.
The default for a BroadWorks-hosted directory is Enterprise.
4
In the Value column of URL, enter the URL for your personal or network directory.
For a directory on your D230 base station, enter the system’s IP address.
For a directory shared within your company, enter a URL, or for a BroadWorks-hosted directory,
leave this value blank.
5
Click Submit. Reboot your system when you complete your changes.
6
Go to DECT Wireless > Handset n, where n is any handset registered to your base station.
7
In the Default column, clear the check box for DirectoryService.
Page 41
Call Features
40
8
Select the SPn Service you just configured.
Using the default value of Any tells your base station to use the first directory it finds, which may
cause unpredictable results if you configure more than one directory.
9
Click Submit. Reboot your system when you complete your changes.
Configure SRTP Crypto Suite
You can configure SRTP encryption to enhance the security of your calls. VVX D230 phones support the
following crypto suites:
●
AES_CM_128_HMAC_SHA1_32
●
AES_CM_128_HMAC_SHA1_80
●
AES_CM_192_HMAC_SHA1_32
●
AES_CM_192_HMAC_SHA1_80
●
AES_CM_256_HMAC_SHA1_32
●
AES_CM_256_HMAC_SHA1_80
●
AES_192_CM_HMAC_SHA1_32
●
AES_192_CM_HMAC_SHA1_80
●
AES_256_CM_HMAC_SHA1_32
●
AES_256_CM_HMAC_SHA1_80
To configure SRTP crypto suite:
1
In the system web interface, go to Voice Services > SPn Service > Calling Features (where n is
the SP service you want to configure).
a
In the Default column, clear the check boxes for the X_SRTP and X_SRTPCryptos parameters.
b
In the Value column for the X_SRTP parameter, select the check box.
c
In the Value column for the X_SRTPCryptos parameter, enter the crypto suites you want to use,
separated by a comma.
2
Select Submit.
3
Reboot your phone.
Page 42
41
Conference Calls
A conference call is a conversation involving two or more remote parties. To start a conference, there must
be at least two calls and with at least one of them in the Connected state and the other in the Holding state.
Your system supports two methods to conference multiple parties:
●
Local mixing/bridging
●
External conference bridge
Local Mixing or Bridging
After starting three-way conference calls, you can see the two remote parties in the Connected state.
External Conference Bridge
You can connect only SIP or SP calls with an external conference bridge. When using an external
conference bridge, the conference bridge limits the conference size. Check with your conference service
provider on the conference size limit.
Enable an External Conference Bridge
You can configure the conference bridge and enable it as follows.
To enable an external conference bridge:
1
On the Voice Services >SPn Service > Calling Features page, enter the user ID or (SIP) URL of
the external conference bridge in the X_ConferenceBridge parameter.
2
On the DECT Wireless – HandsetX – Calling Features page, set the
UseExternalConferenceBridge parameter to True.
X refers to the handset’s number.
Note that only participants on the same SP service or using the same ITSP profile as the conference bridge
can be referred to the bridge. For participants that are referable, your system keeps them in the conference
using local mixing. They’re then subject to the local mixing limit.
The Opus codec doesn’t support three-way calling with both legs using Opus.
Page 43
Conference Calls
42
Add a Participant to the Conference Bridge
You can add participants to the conference bridge with the conference parameter.
To add a participant to the conference bridge:
1
From your handset, make a new call to the target number (or answer a new incoming call from
another party, if applicable).
Your system automatically holds the call to the conference bridge.
2
Select Option > Conference when the called target answers.
The call to the conference bridge resumes while the new remote party is referred to the same
conference bridge contact to be added to the conference bridge. You can add more participants until
the conference reaches the specified limit.
Page 44
43
Third-Party Servers
This section provides information on configuring D230 systems and features with third-party servers.
BroadSoft
You can configure D230 systems with BroadSoft server options.
BroadSoft AS-Feature-Event
The AS-Feature is a collection of network-provided features available on a BroadSoft application server. You
can view and change the settings from the system web interface. These network-provided features are
configured and executed in the context of a single SP service.
To view and change the network-provided features, you must enable the Voice Services – SPn Service –
Calling Features::X_ASFeatureEventSubscribe option, then enable the individual network-provided
features you want users to access from the handset.
The AS-Feature is based on the SIP subscribe/notify framework. You can set the expires value of the
subscription dialog (initiated by the D230 per SP service with the feature enabled) using the ITSP Profile X
– SIP – Feature Configuration::X_ASFeatureEventSubscribeExpires parameter. When a setting is
changed, the server also updates the D230 system with a NOTIFY that specifies the latest settings of just
the affected features.
You can access Call Forward and the Do Not Disturb network-provided features from the handset menu
or softkey. You also can change any of the network-provided service settings from the system web interface
of the base station.
For more information on AS-Feature Event parameters, see the VVX D230 Data Model.
Configure BroadSoft AS-Feature
You can activate the BroadSoft AS-Feature set to access features available from your third-party server.
To activate the BroadSoft AS-Feature set:
1
In the system web interface, go to Voice Services > SPn Service > Calling Features.
2
Uncheck the box in the Default column for X_ASFeatureEventSubscribe.
The features themselves run entirely on the server. Feature settings are stored on the server. The
handset displays settings values as stored on the server, not settings entered and submitted by the
administrator or user, which the server may or may not accept.
Page 45
Third-Party Servers
44
3
Check the box in the Value column for X_ASFeatureEventSubscribe to enable this feature.
4
Click Submit. Reboot your system when you complete your changes.
Note that this setting configures BroadSoft AS-Feature on a per-line basis only.
Activating BroadSoft AS-Feature lets you use these network-provided services:
●
Call Park
●
Call Forward Always
●
Call Forward Busy
●
Call Forward No Answer
●
Network Directory
●
Do Not Disturb
Configure Call Forward All
The functionality provided by Call Forward All is similar to that of the CallForwardUnconditional function
provided natively by the handset (per line). Poly recommends that you disable the native version when using
the network-provided version to avoid ambiguity.
To configure the Call Forward All settings:
1
In the system web interface, go to Voice Services > SPn Service > Network Provided Services.
2
Uncheck the box in the Default column for CallForwardAlways.
3
Check the box in the Value column for CallForwardAlways.
4
Click Submit. Reboot your system when you complete your changes.
Note that you can specify the number to forward all incoming calls. These settings are submitted to and
stored on the server.
Configure Call Forward Busy
You can activate call forward busy on your third-party provider.
To configure the Call Forward Busy settings:
»
Enable the SPn Service > Network Provided Services::CallForwardBusy option.
The functionality provided by this feature is similar to that of the CallForwardOnBusy feature that is
available natively on the D230 system.
Configure Call Forward No Answer
You can activate call forward on no answer on your third-party provider.
Page 46
Third-Party Servers
45
To configure the Call Forward No Answer settings:
»
In the system web interface, enable the SPn Service > Network Provided
Services::CallForwardNoAnswer option.
This feature is similar to the CallForwardOnNoAnswer that is available natively on the D230 system.
Configure Do Not Disturb
You can enable DOD on your third-party provider.
To view and change the Do Not Disturb settings:
»
In the system web interface, enable the SPn Service > Network Provided
Services::DoNotDisturb option.
The functionality provided by this feature is similar to that of the DoNotDisturb that is available
natively on the D230 system.
BroadSoft XSI Features
XSI features is a collection of features provided with a BroadSoft XSI application server. The D230 system
makes XSI features available per SP/SIP service, so you can configure as many as eight independent sets
of XSI services per system, one per SP service.
You can access some of the XSI features from the system by launching dedicated apps (such as Network
Directories) via the handset menu.
BroadSoft XSI Feature Parameters
Parameter Group
Parameter
Description
ITSP Profile X – SIP
X_XsiServer
The XSI server hostname or IP address. The D230 system
attempts to resolve the hostname as DNS A Record only.
DNS SRV lookup isn’t supported here.
ITSP Profile X – SIP
X_XsiServerPort
The server port. If not specified (or 0), the default port is used
(80 for HTTP or 443 for HTTPS).
ITSP Profile X – SIP
X_XsiServerScheme
Must be HTTP or HTTPS.
SPn Service – SIP
Credentials
X_XsiUserName
The user name to authenticate to the XSI server with. If not
specified (blank), the D230 system forms the user name as:
{sip-userid}@{sip-domain}
where
{sip-userid} is the SIP Account User ID that is used for
SIP Registration on the same SP service, and
{sip-domain} is the domain name used for SIP
Registration on the same SP service.
SPn Service – SIP
Credentials
X_XsiPassword
The password to authenticate to the XSI server with. If not
specified (blank), the same password for SIP authentication
on the same SP service is used.
Page 47
Third-Party Servers
46
Network Directories
Network directories are directories hosted by a server somewhere in the network. With the BroadSoft
BroadWorks platform, the D230 system supports the Enterprise Directory of a network. For more information
on setting up and managing the directories on a BroadWorks server, refer to the BroadSoft documentation.
Enable Network Directory Access on the Handset
You can enable network directory access on the handset.
To enable network directory access on the handset:
1
In the system web interface, go to SPn Service > Network Provided Services.
2
Uncheck the box in the Default column for Directory.
3
Check the box in the Value column for Directory.
4
Go to SPn Service > Network Directory Setup.
5
Uncheck the box in the Default column for DirectoryType.
6
In the Value column, choose a directory type.
7
Click Submit. Reboot your system when you complete your changes.
Note that this setting configures the network directory feature on a per-line basis only.
Access a Network Directory From the Handset
Once you enable network directory access on the handset, you can access a network directory from the
handset.
To access a network directory from the handset:
1
In the system web interface, enable network directory access for the service provider.
2
If you want to assign a directory service to a particular SPn line, go to DECT Wireless > Handsetn
Settings.
3
Uncheck the boxes in the Default column for PrimaryLine and DirectoryService.
4
In the Value columns for PrimaryLine and DirectoryService, choose a service.
5
Click Submit. Reboot your system when you complete your changes.
6
On the handset, click Directories from the Main menu of the handset UI.
Search or Download a Generic Network Directory
Your VVX D230 can search or download a generic network directory.
To search for a generic network directory:
1
In the system web interface, go to Voice Services > SPn Service > Network Directory Setup >
Directory.
Page 48
Third-Party Servers
47
2
If checked, uncheck the boxes in the Default column for URL and DirectoryType.
3
Do one of the following:
Enter the URL for the directory.
In the DirectoryType parameter, choose the value for your directory.
4
Click Submit.
Your directory is selected and downloaded.
Page 49
48
Call Routing
Call routing is the process your system uses to set up a call bridge or an endpoint call based on information
like the trunk on which the call originates, the caller’s number, and the called number.
From your system’s perspective, calls originated from the trunk side are considered inbound calls, while
calls originated from an endpoint are outbound calls.
Call routing rule configuration relies heavily on digit maps. If you aren’t familiar with how digit maps work,
see the VVX D230 DECT IP Phone Technical Reference Guide on the Poly Online Support Center.
Inbound Call Route Configuration
Every trunk has a corresponding InboundCallRoute parameter in your system configuration. It’s a
comma-separated list of rules where each rule is also surrounded by a pair of curly braces {}. No extra
white space is allowed. These rules tell your D230 how to handle an inbound call, such as sending it to a
handset and ringing any attached phones.
By default, the X_InboundCallRoute parameter specifies the handset on which an incoming call rings.
Edit the Inbound Call Route Configuration
You can edit the inbound call route configuration to specify a different service (trunk) for each handset.
To edit the incoming call route configuration:
1
Go to Voice Services > SPn Service.
2
In the Default column for the X_InboundCallRoute parameter, clear the check box.
3
In the Value column for the X_InboundCallRoute column, enter the device that uses this call
route. Recommended values are dt1 (handset 1) for SP1, dt2 (handset 2) for SP2, and so forth.
If you enter the same dtn value for more than one handset, then all handsets with that number ring
when an incoming call occurs.
Outbound Call Route Configuration
Every endpoint has an OutboundCallRoute parameter in its system configuration. It tells your system
where to send the call when the endpoint attempts to make a call. Endpoints can call each other or an
outside number using one of the trunks. The OutboundCallRoute syntaxes are almost identical to those
of the InboundCallRoute. The differences are mainly in the implied value when an optional field is
omitted, no caller objects, and one and only one terminal object per terminal-list in an
OutboundCallRoute. Forking isn’t supported when routing outbound calls.
Page 50
Call Routing
49
Edit the Outbound Call Route Configuration
You can edit the outbound call route configuration to limit the numbers each handset can dial.
To edit the outbound call route configuration:
1
Go to DECT Wireless > Handsetn.
2
In the Default column, clear the check box for the parameters you want to edit.
3
In the Value columns for these parameters, enter your changes.
Poly recommends keeping the default parameters. For more information on editing outbound call
route configuration, see the VVX D230 DECT IP Phone Technical Reference Guide on the Poly
Online Support Center.
Multiline Setup
After you configure the primary line on the VVX D230 DECT IP Phone, you can configure additional Service
Provider and OBiTALK lines on registered handsets.
You can assign handsets with the following types of lines:
●
Inbound service provider lines
●
Outbound service provider lines
●
OBiTALK (peer-to-peer) lines
You can assign two or more inbound or outbound lines and an OBiTALK line to up to ten handsets, assign
a primary line for each handset, and label each handset.
Assign Inbound Call Lines
You can assign each handset with up to eight designated service provider lines for receiving incoming calls
and assign which handsets can receive calls from OBiTALK (peer-to-peer) lines.
To assign inbound call lines:
1
In the system web interface, go to DECT Wireless > Multiline Setup.
2
Select the check boxes for the handsets that will receive incoming calls for each service provider line
and from OBiTALK devices.
Assign Outbound Call Lines
You can assign each handset with up to eight designated service provider lines for placing outgoing calls
and assign which handsets can place calls to OBiTALK (peer-to-peer) lines.
To assign outbound call lines:
1
In the system web interface, go to DECT Wireless > Multiline Setup.
Page 51
Call Routing
50
2
Select the check boxes for the service provider (SP) lines and you want to assign to handsets to
place outgoing calls.
3
Select a Primary Line for each handset.
4
(Optional) Assign a Handset Name to each handset.
Page 52
51
Troubleshooting
Refer to the following topics to help you diagnose and fix issues with your system.
Back Up and Restore Your Base Station
Configuration
You can back up your base station configuration, then restore it to any base station.
When you back up the current configuration of your base station, the backup file is stored in XML format at
a user-specified location. The default storage location is your PC’s Downloads folder and the default name
of the file is backupxxxxxxxxxxxx.xml, where xxxxxxxxxxxxxx represents the MAC address of your
base station.
When backing up your base station’s configuration, select any of the following options before clicking
Backup. Note that passwords aren’t backed up.
When your file browser window opens, you can change the file name and choose the location to save the
backup file.
Back Up Your Base Station Configuration
You can back up your base station’s configuration to restore it later, or copy it to another base station.
Backup Options
Option
Description
Default Setting
Incl. Running Status
If checked, the backup file includes the values of all status
parameters. Otherwise, status parameters are excluded from the
backup.
No
Incl. Default Value
If checked, the default values of parameters are included in the
backup file. Otherwise, the backup excludes default values.
No
Use OBi Version
If not checked, the backup file uses XML tags that are compliant with
the TR-104 standard. Otherwise, the backup file is stored in an OBi
proprietary format where the XML tags aren’t compliant with TR-104,
but the file size is smaller and the file is more readable.
No
Different web browsers may handle this differently. If the security settings of your web browser
block this operation, you should change the security settings temporarily to allow this operation to
complete.
Page 53
Troubleshooting
52
To back up your base station configuration:
1
In the system web interface, go to System Management > Device Update.
2
In Backup Configuration, choose your backup options.
3
Click Backup to back up your base station configuration.
4
Click Save.
Restore Your Base Station Configuration
You can restore your previously backed up base station’s configuration. This procedure assumes you have
already backed up your base station configuration.
To restore up your base station configuration:
1
In the system web interface, go to System Management > Device Update.
2
In Restore Configuration, choose a backup configuration file and click Open.
3
Click Restore. Your system restarts.
Share Your Base Station Configuration
You can save and then share your base station configuration with other base stations.
To share your base station configuration:
1
In the system web interface, go to System Management > Device Update.
2
In the Backup Configuration section, check the boxes for the parameters you want to share.
Check Incl. Running Status to back up parameters with values that include running counts.
Check Incl. Default Value to include parameters set to their default value.
Check Use OBi Version to use the abbreviated OBi-style parameter names.
3
Click Backup to save your configuration file. Its default location is the Downloads folder on your
PC.
4
Copy the backup configuration file to a location that is visible from the PC you will use to share the
configuration.
5
In the system web interface for that base station, go to System Management > Device Update.
6
In the Restore Configuration section, choose that file and click Restore.
Firmware Update
You can update the firmware for your base station from the native web page. The firmware file must be
stored locally on a computer that you can access with a web browser.
All passwords and PINs are excluded from the backup file. Hence, they aren’t available to restore.
Call history is excluded from the backup, but can be saved as an XML-formatted file separately
from the Call History web page.
Page 54
Troubleshooting
53
To update the D230 base station firmware:
1
Select the System Management > Device Update menu on the side panel of the web page.
2
Click the Browse button in the Firmware Update section of the page. In a file browser window,
select the firmware file.
3
Click the Update button to start the upgrade process.
The process stakes about 30 seconds to complete.
Possible Error Messages on Firmware Update Failure
The following table lists the possible error messages encountered when a firmware upgrade fails.
Reboot Reason Codes
The product information status shows some basic product information, as well as the system up-time with
the last reboot reason code in parentheses. The reboot reason codes are defined as follows.
Don’t disconnect the power from your base station during this procedure. If the new firmware
upgrades successfully, your base station reboots automatically to start running the new firmware.
Otherwise, the web page shows an error message explaining why the upgrade failed.
Error Messages for Firmware Update Failure
Error Message
Description
Suggested Solution
Firmware Package
Checksum Error
A corrupted firmware package file was used for
the update.
Check the file and / or redownload the
firmware package and try again.
System Is Busy
Your base station is busy because one of the
services in an active call or system provisioning
is in progress.
Try to update again later.
Firmware Is Not
Modified
Your base station is already running the same
firmware as the one selected for update.
No need to upgrade.
Reboot Reason Codes
Reason Code
Description
0
Reboot on power cycle.
1
Operating system reboot.
2
Forward upgrade.
3
Reboot after new profile invoked.
4
Reboot after parameter value change or firmware has changed and invoked via system web
interface.
5
Reboot after factory reset using your system hardware PIN.
6
New profile invoked AND profile URL changed.
Page 55
Troubleshooting
54
Call History
The Call History page shows the last 200 calls. Detailed call information is available, including the terminals
involved, the name (if available) of the peer endpoints making the call and the direction / path the call took,
and the time events took place.
Save the Call History
You can save the call history for a D230 handset from the web interface.
To save the call history:
1
In the web interface, go to Status > Call History.
2
Click the Save All button.
Your D230 saves the call history to the callhistory.xml file in your Downloads folder.
Erase the Call History
You can erase the call history for a D230 handset from the web interface.
To erase the call history:
1
In the web interface, go to Status > Call History.
2
Click the Remove All button.
Your D230 permanently erases the call history.
7
Reboot from SIP Notify (Reserved).
8
Reboot from telephone port (IVR).
9
Reboot from webpage — no change in parameter values or firmware.
10
Reboot during OBiTALK signup.
12
Reboot after DHCP server offers IP, GW-IP, and/or netmask different from what your system is
currently using.
13
Reboot on data networking link re-establishment.
18
Reboot on WAN IP address change.
19
Reboot on LAN IP address change.
Reboot Reason Codes (continued)
Reason Code
Description
Page 56
Troubleshooting
55
Remove Calls From Parking Lot Status List
You can end parked calls using the Parking Lot Status list in the web interface.
To remove calls from the Parking Lot Status list:
1
In the web interface, go to Status > Call History.
2
In the Remove column, check the box for the call you want to remove.
3
Click the Remove button.
Your D230 ends this call and removes it from the Parking Lot Status list.
Extract PCAP Capture Result
You can enable Packet Capture (PCAP) to see network packet traffic.
If PCAP is enabled on your base station, click the Extract button to extract the PCAP capture results. This
saves a file named trace.pcap to your PC. The default save location is your downloads folder, unless
otherwise specified.
Before extracting PCAP capture data, set the Enable parameter to False to prevent capturing extra data
that could corrupt your file.
To enable PCAP:
1
In the web interface, go to System Management > Device Admin > Remote PCAP Server.
2
In the Default column, uncheck the box for the Enable parameter.
3
In the Value column of the Enable parameter, check the box to set this parameter to True.
4
Click Submit. No reboot is required.
To capture packets using PCAP:
1
In the web interface, go to System Management > Device Admin > Packet Capture.
2
In the Default column, uncheck the box for the On parameter.
3
In the Value column of the On parameter, check the box to set this parameter to True.
4
If desired, change the Storage setting between Internal Storage (the default) and OBiTalk
Designated.
5
Click Submit. No reboot is required.
6
When you are ready to extract the captured packets, go to System Management > Device Admin
Packet Capture.
7
In the Value column of the On parameter, uncheck the box to set this parameter to False.
8
Go to System Management > Device Update > PCAP Capture Result.
9
Click Extract. You can specify a location to save your packet file
Page 57
Troubleshooting
56
System Logs
You can capture system logs to help troubleshoot your D230 system.
To capture syslog messages, you need to run a syslog server application at an IPv4 address that is
reachable from your D230 system.
Activate Syslog Messaging
You can enable your D230 system to send syslog messages for troubleshooting.
To activate syslog messaging:
1
In the system web interface, go to System Management > Device Admin > Syslog.
2
Enter the URL for your syslog server in Server parameter.
3
Set the Port parameter to 514.
4
Set the level parameters for the reporting levels you require.
Include Detailed SIP Messages in Syslog Messaging
You can include detailed SIP messages in your D230 syslog messages.
To include detailed SIP messages on an SP service in the syslog:
1
Activate syslog messaging.
2
Go to Voice Services > SPn Service > Debug Options for each service you want to report syslog
messages.
3
Set the X_SipDebugOption parameter for the reporting level you require.
4
In the X_SipDebugExclusion parameter, enter a list of SIP methods (requests and responses) to
exclude from the log.
For troubleshooting a call flow, you can exclude methods such as OPTIONS that are used for
keep-alive purpose in most cases.
SPn Service Status Messages
The SPn Service Status (n = 1–8) values show the current state of the service with regard to its configuration
(or not), and if configured, its registration status. If a problem exists with the registration or authentication of
your system with a prescribed service, a SIP 4xx error message displays here. You can use this information
for troubleshooting issues with SIP-based services.
To view Service Status messages:
»
In the web interface, go to Status > System Status > SPn Service Status.
The Status parameter shows the status for this service, including error messages, if any.
Page 58
Troubleshooting
57
SPn Service Status Error Messages
The following table lists some of the SPn Service Status error messages encountered when a firmware
upgrade fails.
Factory Resetting Your System
You can reset all D230 configuration parameters to factory default values.
Note that these processes can’t be reversed. You’ll need to reregister your base station with your service
provider and reregister your handsets with your base station.
SPn Service Status Error Messages
Error Message
Description
400 Bad Request
The server couldn’t understand the request.
401 Unauthorized
The request needs to perform authentication.
402 Payment Required
Indicates that payment is required for further processing of request.
403 Forbidden
Sent when the server understands the request, found the request to be
formulated correctly, but won’t service the request.
404 Not Found
The server hasn’t found the SIP URI indicated by the user.
405 Method Not Allowed
The request contains a list of methods that aren’t allowed.
406 Not Acceptable
The request can’t be processed due to a requirement in the request
message.
407 Proxy Authentication Required
Indicates that the UAC first has to authenticate itself with the proxy before
the request can be processed.
408 Request Timeout
The specified time period in the Expires header field of INVITE request has
passed.
423 Interval Too Brief
Returned by a registrar that is rejecting a registration request because the
requested expiration time on one or more Contacts is too brief.
480 Temporarily Unavailable
Indicates that the request has reached the correct destination, but the called
party isn’t available for some reason.
481 Dialog/Transaction Does Not
Exist
Indicates that a response referencing an existing call or transaction has
been received for which the server has no record or state information.
483 Too Many Hops
Indicates that the request has been forwarded the maximum number of
times as set by the Max-Forwards header.
486 Busy Here
Indicates that the user agent is busy and can’t accept the call.
487 Request Terminated
Sent by a User Agent that has received a CANCEL request for a pending
INVITE request.
Page 59
Troubleshooting
58
Factory Reset Your D230 Handset
You can reset your D230 handset to factory default values from the handset’s local interface.
To factory reset your handset:
1
On the handset, go to Settings.
2
Select Factory Reset.
3
Press OK.
After your handset restarts, reregister it with your base station.
Factory Reset Your D230 Base Station
You can reset your D230 base station to factory default values in the system web interface. Call history and
statistical information is removed at the same time. Resetting the base station configuration should be used
with extreme caution as the operation cannot be undone.
To factory reset your D230 system:
1
In the system web interface, go to System Management > Device Update > Reset Configuration.
Optionally, back up your base station.
2
Select Reset.
3
After your base station restarts, restore its configuration.
re-register it with your service provider and re-register your handsets.