/mcpNetwork module
Description
C9200-NM-4X
4x 1G/10G network module
C9200-NM-BLANK
No network module
1 Supported only on C9200-24PXG, C9200-48PXG
2 Not supported on C9200-24PXG, C9200-48PXG
For additional details, please read our FAQ:
https://www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-9000/nb-09-cat-9k-faq-cte-
en.pdf.
Platform resiliency
Power supplies
Cisco Catalyst 9200 Series switches support dual field-replaceable power supplies (Figure 3). Each switch
ships with one default power supply, and a second identical power supply can be purchased with the initial
order or can be added later. The second power supply can provide redundancy or additional power to PoE+
ports as needed.
Cisco Catalyst 9200CX Series HVDC models can be powered by high voltage DC as well as line voltage AC
with its default power supply. These switches support high efficiency and low energy consumption when
connected to DC micro grid by avoiding multiple AC-DC conversions. The compatibility with AC also provides
flexibility and investment protection for moving to DC power in the future.
Intelligent PoE+
●
IEEE 802.3at PoE+ (up to 30W per port) is supported on Cisco Catalyst 9200 Series switches to lower
the total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet wireless
access points, or other standards-compliant PoE+ end devices. PoE+ removes the need to supply wall
power to PoE-enabled devices and eliminates the cost of adding electrical cabling and circuits that
would otherwise be necessary in IP phone and WLAN deployments. With Cisco Catalyst 9200 Series
switches, PoE+ power allocation is dynamic, and power mapping scales up to a maximum of 1440W of
PoE+ power.
●
IEEE 802.3bt Class 6 and Cisco UPOE (up to 60W per port) is supported on Catalyst 9200CX Series
mGig model. This facilitates delivery of network power to devices requiring higher power.
●
PoE Powered Device (PD) - Catalyst 9200CX-12T-2X2G can be powered through the uplink with IEEE
802.3bt class 6 or UPOE power from upstream switch. Catalyst 9200CX-12PT-2G can be powered
through redundant uplinks with IEEE 802.3bt class 8 or UPOE+ power from upstream switch.
●
Perpetual PoE is supported on Cisco Catalyst 9200 Series switches, and maintains the PoE+ power
during a switch reload. This is important for critical endpoints such as medical devices and for Internet of
Things (IoT) endpoints such as PoE-powered lights, so that there is no disruption during a switch reboot.
●
Fast PoE: When power is restored to a switch, Fast PoE starts delivering power to endpoints without
waiting for the operating system to fully load, thereby speeding up the time for the endpoint to start up.