McDewey

Description Parameters Restarts the hardware agents on the server. hardware-agents restart Tests the SNMP host by sending sample alarms to local syslog and remote syslog. test Walks the SNMP MIB, starting with the specified SNMP object. walk Specifies the SNMP version. Possible values are 1 or 2c. version Specifies the SNMP community string. community Specifies the IP address of the server. Enter 127.0.0.1 to specify the local host. You can enter the IP address of another node in the cluster to run the command on that node. ip-address Specifies the SNMP Object ID (OID) to get. object Specifies a file in which to save the command output. file Requirements Command privilege level: 1 Allowed during upgrade: Yes utils snmp config 1/2c community-string This interactive command adds, deletes, lists or updates a community string. Command Syntax utils snmp config 1/2c community-string {add|delete |list|update} Syntax Description Description Parameters Adds a new community string. add Deletes a community string. delete Lists all community strings. list Updates a community string. update Useage Guidelines The system prompts you for the parameters. The SNMP Master Agent service is restarted for configuration changes to take effect. Do not abort command after execution until restart is complete. If the command is aborted during service restart, verify service status Cisco Emergency Responder Command Line Interface Guide for Release 15 129 CLI Commands utils snmp config 1/2c community-string