McDewey

Example This example displays trace information for CDP. show trace cdps show ups status This command shows the current status of the USB-connected APC smart-UPS device and starts the monitoring service if not already started. Command Syntax show ups status Usage Guidelines This command only can provide a complete status on 7835-H2 and 7825-H2 servers. show version This command displays the software version on the active or inactive partition. Command Syntax show version {active| inactive} Syntax Description Description Parameters Displays the version running on the active partition. active Displays the version on the inactive partition. inactive Requirements Command privilege level: 0 Allowed during upgrade: Yes show webapp session timeout This command displays the webapp session timeout value, which is the amount of time, in minutes, that can elapse before a web application times out and logs off the user. Command Syntax show webapp session timeout Command Mode Administrator (admin:) Cisco Emergency Responder Command Line Interface Guide for Release 15 88 CLI Commands show ups status