McDewey

Command Modes Administrator (admin:) Usage Guidelines The systems prompts you for the old and new passwords. The password must contain at least eight characters, and the system checks it for strength. Note Servers in a cluster use the security password to authenticate communication between servers. You must reset the cluster after you change the security password. We recommend that you restart each server after the password is changed on that server. 1. Change the security password on the publisher server (first node) and then reboot the server (node). 2. Change the security password on all the subsequent servers and nodes to the same password that you created on the first node and restart subsequent nodes, including application servers, to propagate the password change. Note Failure to reboot the servers (nodes) causes system service problems and problems with the Cisco Collaboration Communication OS (C3OS) Administration windows on the subscriber servers. Note Requirements Command privilege level: 1 Allowed during upgrade: No Applies to: Unified Communications Manager, IM and Presence Service on Unified Communications Manager, and Cisco Unity Connection. Set replication-sync monitor This command enables or disables replication monitoring by the Cisco Replication Watcher service. The Cisco Replication Watcher service blocks other services from starting until database replication is setup and functioning normally. set replication-sync monitor {enable | disable} Syntax Description Description Parameters Turns on the replication monitoring service. enable Turns off the replication monitoring service disable Command Modes Administrator (admin:) Command Line Interface Reference Guide for Cisco Unified Communications Solutions, Release 15 and SUs 121 Set Commands Set replication-sync monitor