/mcpAllowed during upgrade: Yes Applies to: Unified Communications Manager, IM and Presence Service on Unified Communications Manager, Cisco Unity Connection show fileserver transferspeed This command shows the reading and writing speed between the IM and Presence Service node and the external file server. It involves copying a large file onto the mounted directory and then copying it back onto the node. As a result, this command may have a performance impact on the node from which it is run. show fileserver transferspeed Command Modes Administrator (admin:) Requirements Applies to: IM and Presence Service on Unified Communications Manager. Example admin:show fileserver transferspeed WARNING: This command involves copying a large file to and from the mounted directory. It can impact the performance of the system. Do you want to continue? (y/n):y Creating a file to perform the test, please wait... Copying the file onto the mounted file system. Please note the writing speed recorded below. 262144+0 records in 262144+0 records out 1073741824 bytes (1.1 GB) copied, 28.9302 s, 37.1 MB/s Copying the file from the mounted file system. Please note the reading speed recorded below. 262144+0 records in 262144+0 records out 1073741824 bytes (1.1 GB) copied, 67.7504 s, 15.8 MB/s Clean-up finised admin: show haproxy client-auth This command displays the client authentication configured on the specified port. show haproxy client-auth portnum Command Line Interface Reference Guide for Cisco Unified Communications Solutions, Release 15 and SUs 174 Show Commands show fileserver transferspeed