McDewey

Allowed during upgrade: Yes Applies to: Unified Communications Manager, IM and Presence Service on Unified Communications Manager, and Cisco Unity Connection. utils firewall ipv6 debug This command turns IPv6 firewall debugging on for the configured time period. The default value of time period is 5 minutes. utils ipv6 firewall debug {off[time]} Syntax Description Description Parameters (Optional) Turns off the IPv6 firewall debugging. If you do not enter the time parameter, this command disables the firewall as per the default time period value. off (Optional) Sets the duration for which the firewall debugging is to be enabled in the following formats: • Minutes: 0–1440m • Hours: 0–23h • Hours and minutes: 0–23h 0–60m time Command Modes Administrator (admin:) Requirements Command privilege level: 1 Allowed during upgrade: Yes Applies to: Unified Communications Manager, IM and Presence Service on Unified Communications Manager, and Cisco Unity Connection. utils firewall ipv6 This commands enables and disables IPv6 firewall. utils firewall ipv6 {enable | disable[time]} Syntax Description Description Parameters Turns on the IPv6 firewall. enable Turns off the IPv6 firewall. If you do not enter the time parameter, this command disables the firewall for 5 minutes. disable Command Line Interface Reference Guide for Cisco Unified Communications Solutions, Release 15 and SUs 302 Utils Commands utils firewall ipv6 debug