McDewey

Allowed during upgrade: No Applies to: Unified Communications Manager, IM and Presence Service on Unified Communications Manager, and Cisco Unity Connection Example admin:utils network usgv6 disable Disabling USGv6 configurations in this mode. Successfully disabled USGv6 configurations in this node. utils network usgv6 interface-reset This command resets the eth0 interface in this node. utils network usgv6 interface-reset Syntax Description Description Parameters Resets the Ethernet interface. interface-reset Command Modes Administrator (admin:) Requirements Command privilege level: 4 Allowed during upgrade: No Applies to: Unified Communications Manager, IM and Presence Service on Unified Communications Manager, and Cisco Unity Connection Example admin:utils network usgv6 interface-reset Resetting the ipv6 interface in this node Successfully resetted ipv6 interface in this node utils network usgv6 interface_identifier This command defines the IPv6 interface identifier used for this node. The identifier you choose determines the method that is used for generating part of the IPv6 address. This is applicable to both the link-local IPv6 address and Stateless Address Auto-configuration (SLAAC). The address contains a 64-bit prefix and a 64-bit interface identifier generated by the device. Opaque, a random 64-bit interface identifier is generated as per RFC-7217 and MAC, an EUI-64 based interface identifier is generated as per RFC-2373. utils network usgv6 interface_identifier { opaque | mac } [reboot] Command Line Interface Reference Guide for Cisco Unified Communications Solutions, Release 15 and SUs 324 Utils Commands utils network usgv6 interface-reset