McDewey

Enter the privacy protocol pass phrase:: ******** Enter the ip address of the Server, use 127.0.0.1 for localhost. Note that you need to provide the IP address, not the hostname.:: <enter the IP address of your server> The Object ID (OID):: iso.3.6.1.2.1.1.1.0 Enter parameter as "file" to log the output to a file. [nofile]:: This command may temporarily impact CPU performance. Continue (y/n)?y SNMPv2-MIB::sysDescr.0 = STRING: Linux release:3.10.0-1062.18.1.el7.x86_64 machine:x86_64 utils snmp walk 1 This interactive command walks through the SNMP MIB using SNMP version 1 starting with the specified OID utils snmp walk 1 version Syntax Description Description Parameters Specifies the SNMP version. Possible values include 1, 2c or 3. version Specifies the SNMP community string. community Specifies the IPv4/IPv6 address of the server. Enter 127.0.0.0 to specify the local host. You can enter the IPv4/IPv6 address of another node in the cluster to run the command on that node. ip-address Specifies the SNMP Object ID (OID) to walk object Specifies a file in which to save the command output. file Command Modes Administrator (admin:) Requirements Command privilege level: 1 Allowed during upgrade: Yes Applies to: Unified Communications Manager, IM and Presence Service on Unified Communications Manager, Cisco Unity Connection utils snmp walk 2c This interactive command walks through the SNMP MIB using SNMP version 2c starting with the specified OID. utils snmp walk 2c version Syntax Description Description Parameters Specifies the SNMP version. Possible values include 1, 2c or 3. version Command Line Interface Reference Guide for Cisco Unified Communications Solutions, Release 15 and SUs 362 Utils Commands utils snmp walk 1