/mcpDescription Parameters Starts a new upgrade wizard or assumes control of an existing upgrade wizard. initiate Displays the status of an upgrade. status Usage Guidelines Before you begin to upgrade your system, use the Software Upgrades > Cluster Software Location menu from the Cisco Unified OS Administration user interface of a Unified CM publisher to add, edit, or modify any of the existing configurations for any node in the same cluster. In Release 14 SU2 and later, Software Location settings for all cluster nodes are centrally managed from the Publisher instead of locally on each cluster node. The wizard displays the software location details to configure all the nodes in the same cluster. • Credentials Information―Displays the credentials of the server on which the upgrade image is saved. • Upgrade file source―Displays the location for the server where your upgrade file is saved. You can upgrade from a local source (CD or DVD), or you can use FTP or SFTP to download a remote upgrade file, or if you want to resume an upgrade after a cancel operation, you can use the previously downloaded upgrade file through the local image source option. • Continue with upgrade after download―Indicates the option selected whether you wanted the upgrade to proceed automatically once the upgrade file is downloaded (the default value is yes). If you had chosen to upgrade automatically, no checksum or SHA details get displayed. If you had set the value of to yes or no, the setting remains in the system. • Version switching―Displays the option selected whether you wanted to switch to the new version automatically once the upgrade completes (the default value is no). If you had entered yes, the system switches to the new version and reboots automatically after the upgrade completes. If you had set the value to yes or no, the setting remains in the system. Requirements Command privilege level: 0 Applies to: Unified Communications Manager and IM and Presence Service on Unified Communications Manager. Example: admin:utils system upgrade initiate Warning: Do not close this window without first canceling the upgrade. Warning: Before upgrading the cluster Cisco recommends installing the latest Upgrade Readiness COP file. Refer to the Upgrade Guide on cisco.com for details. Note: Below are the configurations used for the upgrade of current node.To review/modify the configuration, navigate to Cisco unified OS Administration -> Software Upgrades -> Cluster Software Location on publisher. Source: Local Image Continue with upgrade after download (yes/no): no Switch-version server after upgrade [valid only for ISO] (yes/no): no Do you want to continue with these settings (yes/no) [no]: yes Command Line Interface Reference Guide for Cisco Unified Communications Solutions, Release 15 and SUs 368 Utils Commands utils system upgrade (Release 14SU2)