McDewey

Command Modes Administrator (admin:) Usage Guidelines The system asks whether you want to continue to execute this command. If you continue, this command causes the system to restart. Caution Requirements Command privilege level: 1 Allowed during upgrade: No Applies to: Unified Communications Manager, IM and Presence Service on Unified Communications Manager, and Cisco Unity Connection. set network hostname This command allows an administrator to set the network host name, change the IP address of the node, and restart the system. Before attempting this command, the administrator should have a valid DRF backup. Additionally, before attempting a Hostname (or Hostname and IP address) change, the administrator should perform the following: • verify the cluster configuration does not have any configuration problems by executing show hcs cluster verify detailed • update the cluster configuration by executing set hcs cluster config • validate the cluster configuration by executing show hcs cluster verify detailed set network hostname hostname Syntax Description Description Parameters Represents the new network hostname of the system. Note The host name must follow the rules for ARPANET host names. It must start with an alphabetic character, end with an alphanumeric character, and consist of alphanumeric characters and hyphens. The host name can have a maximum length of 63 characters. hostname Command Modes Administrator (admin:) Usage Guidelines The system asks whether you want to continue to execute this command. If you continue, this command causes the system to restart. Caution Command Line Interface Reference Guide for Cisco Unified Communications Solutions, Release 15 and SUs 94 Set Commands set network hostname