/mcpPurpose Command or Action Configure Cisco Jabber for mobility so your users can access enterprise communications Configure Cisco Jabber Dual-Mode, on page 30 Step 7 features through a Jabber client on their smartphone. Complete this task flow if you want to deploy other dual-mode devices, such as FMC or IMS clients that can connect through Wi-Fi. Configure Other Dual-Mode Devices, on page 30 Step 8 Configure a Mobility User Use this procedure to configure an end user with the mobility feature. Procedure Step 1 From Cisco Unified CM Administration, choose User Management > End User. Step 2 In Find and List Users window, perform one of the following tasks: • Click Find and select an existing user to modify the settings. • Click Add New to configure a new user. Step 3 Configure values for the following fields: • User ID • Last Name Step 4 In the Mobility Information area, complete the following fields: a) Check the Enable Mobility check box. b) Optional. Check the Enable Mobile Voice Access check box to allow this user to use Mobile Voice Access. c) In the Maximum Wait Time for Desk Pickup field, enter a value in milliseconds. After hanging up a call from a remote destination, this timer represents the amount of time where the user still has the option of resuming the call from a deskphone. d) In the Remote Destination Limit field, enter the number of remote destinations that a user is permitted to have for single number reach (SNR) targets. Step 5 Complete the remaining fields in the End User Configuration window. For more information on the fields and their configuration options, see Online Help. Step 6 Click Save. Configure Mobility Users Through Bulk Administration Use this procedure to use Bulk Administration's Update Users menu to add the Mobility feature to existing end users by bulk. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 18 Remote Worker Features Configure a Mobility User