/mcpConfigure Intercom Settings Procedure Purpose Command or Action Configure an Intercom Partition, on page 174 Step 1 Configure an Intercom Calling Search Space, on page 175 Step 2 Configure an Intercom Directory Number, on page 175 Step 3 Configure an Intercom Translation Pattern, on page 176 Step 4 Configure an Intercom Partition Procedure Step 1 From Cisco Unified CM Administration, choose Call Routing > Intercom > Intercom Route Partition. The Find and List Intercom Partitions window appears. Step 2 Click Add New. An Add New Intercom Partition window appears. Step 3 Under the Intercom Partition Information section, in the Name box, enter the name and description of the intercom partition that you want to add. Note To enter multiple partitions, use one line for each partition entry. You can enter up to 75 partitions; the names and descriptions can have up to a total of 1475 characters. The partition name cannot exceed 50 characters. Use a comma (,) to separate the partition name and description on each line. If a description is not entered, Unified Communications Manager uses the partition name as the description. Step 4 Click Save. Step 5 Locate the partition that you want to configure. Intercom Partition Configuration window is displayed Step 6 Configure the fields in the Intercom Partition Configuration field area. See the online help for more information about the fields and their configuration options. Step 7 Click Save. The Intercom Partition Configuration window appears. Step 8 Enter the appropriate settings. For detailed information about the Intercom Partition Configuration parameters, see online help. Step 9 Click Save. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 174 Call Center Features Configure Intercom Settings