/mcpPurpose Command or Action conjunction with the Common Device Configuration. Use this procedure in conjunction with the Common Device Configuration if you need assign a softkey template that overrides the assignment in the Common Device Configuration or any other default softkey assignment. Enable advanced conferencing, specify the maximum number of participants, and specify when to drop a conference connection. Configure a Meet-Me Conferencing Number, on page 235 Step 4 Configure a Softkey Template for Meet-Me Conferencing Use this procedure to make the Meet Me softkey available in the off hook call state. Procedure Step 1 From Cisco Unified CM Administration, choose Device > Device Settings > Softkey Template. Step 2 Perform the following steps to create a new softkey template; otherwise, proceed to the next step. a) Click Add New. b) Select a default template and click Copy. c) Enter a new name for the template in the Softkey Template Name field. d) Click Save. Step 3 Perform the following steps to add softkeys to an existing template. a) Click Find and enter the search criteria. b) Select the required existing template. Step 4 Check the Default Softkey Template check box to designate this softkey template as the default softkey template. Note If you designate a softkey template as the default softkey template, you cannot delete it unless you first remove the default designation. Step 5 Choose Configure Softkey Layout from the Related Links drop-down list in the upper right corner and click Go. Step 6 From the Select a Call State to Configure drop-down list, choose the call state for which you want the softkey to display. Step 7 From the Unselected Softkeys list, choose the softkey to add and click the right arrow to move the softkey to the Selected Softkeys list. Use the up and down arrows to change the position of the new softkey. Step 8 Repeat the previous step to display the softkey in additional call states. Step 9 Click Save. Step 10 Perform one of the following tasks: Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 232 Conferencing Features Configure a Softkey Template for Meet-Me Conferencing