/mcpStep 7 In the SIP Hotline Data Route Class Label service parameter field, enter a lable to represent the Hotline Data route class. The default value is ccdata. Step 8 Click Save. Configure the Route Class on Hotline Route Patterns This procedure describes call routing instructions that are specific to Hotline devices. For more information on how to configure route patterns and translation patterns in your network, see the System Configuration Guide for Cisco Unified Communications Manager. For each route pattern that you expect to route a Hotline call, you must set the route class for that route pattern to Hotline Voice or Hotline Data. Before you begin Configure Signaling Labels for the Hotline Route Class, on page 262 Before you perform this procedure, it is expected that your network call routing is set up with route patterns. Procedure Step 1 From Cisco Unified CM Administration, choose Call Routing > Route/Hunt > Route Patterns. Step 2 Click Find to display a list of route patterns in your network. Step 3 For each T1/CAS route pattern that is used to route a Hotline call: a) From the Find and List Route Patterns window, select the route pattern. b) From the Route Class drop-down list box, choose either Hotline Voice or Hotline Data as the route class for this route pattern. c) Click Save. Configure the Route Class on Hotline Translation Patterns Before you begin Before you perform this procedure, it is expected that you have set up network call routing with route patterns and translation patterns. Perform the Configure the Route Class on Hotline Route Patterns, on page 263 procedure. Procedure Step 1 From Cisco Unified CM Administration, choose Call Routing > Translation Pattern. Step 2 Click Find to display the translation patterns in your cluster. Step 3 For each translation pattern that you want to use on a Hotline number, perform the following steps: a) From the Route Class drop-down list box, select either Hotline Voice or Hotline Data. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 263 Placing Calls Configure the Route Class on Hotline Route Patterns