McDewey

Step 5 Click Save. Configure Receive Only on Hotline Phone If you have created your calling search space and partitions already, perform these steps to configure the Hotline phone to receive calls only. Before you begin Configure Calling Search Space for Hotline Call Only Receive Only, on page 265 Procedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. Step 2 Click Find and select the Hotline phone. Step 3 From the Calling Search Space drop-down list, select the new CSS that you created in the previous procedure. Step 4 Click Save. Configure Call Screening with a Calling Search Space Configure call screening for any intraswitched (line to line) Hotline calls by assigning a unique CSS where the Hotline phones that are in the partitions are only those Hotline phones that you want to be able to call each other. You can also configure call screening by creating translation patterns where each pattern matches each number pattern that you want to either allow or screen. Note Procedure Purpose Command or Action Create any new partitions for your Hotline phone lines. Configure Partitions for Hotline Call Screening, on page 267 Step 1 Create a new CSS for the screening list. The CSS must include partitions with only those Hotline numbers that you want to allow. Create Calling Search Space for Hotline Call Screening, on page 267 Step 2 Assign the new CSS and partition to the Hotline phone. Configure Hotline Phones for Call Screening, on page 268 Step 3 Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 266 Placing Calls Configure Receive Only on Hotline Phone