/mcp• Refreshes recipient groups • Sets SIP access to deny • Creates SIP access Configure Panic Button Use this procedure to configure a panic button to send a text and audio notification to IP phones. This allows you to initiate a one click alarm if there is emergency. Before you begin Configure Connection to InformaCast, on page 305. Procedure Step 1 From Cisco Unified CM Administration, choose Advanced Features > Emergency Notifications Paging. Step 2 In the Introduction to InformaCast Emergency Notifications page, click Next to continue. Step 3 In the Installing the InformaCast Virtual Appliance page, click Next to continue. Step 4 In the Connecting Cisco Unified Communications Manager and InformaCast page, click Next to continue. The Configuring a Panic Button page appears. Step 5 From the Choose pre-recorded message by name drop-down list, select the pre-recorded message to be displayed on Cisco Unified IP phones and various devices and systems in emergency. Note You can change the pre-recorded message in InformaCast administration, as required. Step 6 In the Enter DN to trigger the panic button field, enter the Directory Number (DN), which includes the digits 0 to 9, asterisks (*), and pound signs (#). Default value is ***5. Step 7 From the Route Partition drop-down list, select a partition to restrict access to the route pattern. Note If you do not want to restrict access to the route pattern, select <None> for the partition. Step 8 Click Choose Phones to Send Notification button. The Phones to Send Notification dialog box appears. Step 9 From the Phones to Send Notification dialog box, select the Cisco Unified IP phones to send the pre-recorded message. The dial pattern entered by you (for example, ***5) is configured as speed dial on the selected phones. The selected Cisco Unified IP Phone are displayed in the Selected Phones to Send Notification list box. Step 10 Click Add Rules, to create a new rule for the selected Cisco Unified IP Phone to receive notifications. a) Select one of the parameters from the drop-down list. The available options are Device Pool, Description, and Directory Number. b) In the second drop-down list, select a criteria from the following options: Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 307 Placing Calls Configure Panic Button