/mcpStep 5 From the Call Pickup Group Audio Alert Setting(Phone Idle) drop-down list, choose one of the following: • Use System Default • Disable • Ring Once Step 6 From the Call Pickup Group Audio Alert Setting(Phone Active) drop-down list, choose one of the following: • Use System Default • Disable • Beep Only Step 7 Click Save. Configure BLF Call Pickup Notification Before you begin Configure Call Pickup Notification for a Directory Number, on page 362 Procedure Step 1 From Cisco Unified CM Administration, choose System > Service Parameters. Step 2 From the Server drop-down list, choose the server that is running the Cisco CallManager service. Step 3 From the Service drop-down list, choose Cisco CallManager. Step 4 Configure the fields from Clusterwide Parameters (Device - Phone section in the Service Parameter Configuration window. See Service Parameter Fields for BLF Call Pickup Notification, on page 363 for more information about the fields and their configuration options. Service Parameter Fields for BLF Call Pickup Notification Description Field This parameter determines the kind of audio notification that is provided when a phone is idle (not in use) and it needs to be alerted regarding an incoming call on its Call Pickup Group. Valid values are as follows: • Disable • Ring Once Call Pickup Group Audio Alert Setting of Idle Station Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 363 Receiving Calls Configure BLF Call Pickup Notification