/mcpDescription Field Using the drop-down list, choose the Cisco Unified Communications Manager to which these call park numbers apply. Unified Communications Manager Configure a Softkey Template for Call Park Use this procedure to make the Park softkey available. Park softkey has the following call states: • On Hook • Ring Out • Connected Transfer Procedure Step 1 From Cisco Unified CM Administration, choose Device > Device Settings > Softkey Template. Step 2 Perform the following steps to create a new softkey template; otherwise, proceed to the next step. a) Click Add New. b) Select a default template and click Copy. c) Enter a new name for the template in the Softkey Template Name field. d) Click Save. Step 3 Perform the following steps to add softkeys to an existing template. a) Click Find and enter the search criteria. b) Select the required existing template. Step 4 Check the Default Softkey Template check box to designate this softkey template as the default softkey template. Note If you designate a softkey template as the default softkey template, you cannot delete it unless you first remove the default designation. Step 5 Choose Configure Softkey Layout from the Related Links drop-down list in the upper right corner and click Go. Step 6 From the Select a Call State to Configure drop-down list, choose the call state for which you want the softkey to display. Step 7 From the Unselected Softkeys list, choose the softkey to add and click the right arrow to move the softkey to the Selected Softkeys list. Use the up and down arrows to change the position of the new softkey. Step 8 Repeat the previous step to display the softkey in additional call states. Step 9 Click Save. Step 10 Perform one of the following tasks: Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 382 Receiving Calls Configure a Softkey Template for Call Park