/mcp• Park Monitor Reversion Timer—The number of seconds that Cisco Unified Communications Manager waits before prompting the user to retrieve a call parked on this phone line. If the value is 0 or empty, then Cisco Unified Communications Manager uses the value of the Park Monitor Reversion Timer service parameter. Step 4 Complete any remaining fields in the Directory Number Configuration window.For more information on the fields and their configuration options, see Online Help. Step 5 Click Save. Configure Park Monitoring via Universal Line Template Use this procedure to assign park monitoring settings to a universal line template. If you have an LDAP directory sync configured, you can use the universal line template configuration to provision directory number settings with park monitoring configured for multiple users. Before you begin Configure Park Monitoring System Timers, on page 386 Procedure Step 1 From Cisco Unified CM Administration, choose User Management > User Phone/Add > Universal Line Template. Step 2 Perform one of the following steps: • Click Find and select an existing template. • Click Add New to create a new template. Step 3 Expand the Park Monitoring Settings section and complete the fields. For field descriptions, see Park Monitoring Settings for Universal Line Templates, on page 389. Step 4 Click Save. What to do next To apply the universal line template to individual directory numbers, you must assign the template to a user profile, feature group template, and LDAP directory sync. When the sync occurs, the template settings get applied to the phone lines that are a part of the sync. For LDAP setup, see the "Configure End Users" chapters in the System Configuration Guide for Cisco Unified Communications Manager. Park Monitoring Settings for Universal Line Templates The following table contains the Park Monitoring fields in the Universal Line Template Configuration window of Cisco Unified Communications Manager. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 389 Receiving Calls Configure Park Monitoring via Universal Line Template