/mcp• Click Add New to add a new device profile and click Next to choose a device profile type. Click Next to choose a protocol, then click Next. Step 3 Configure the fields on the Device Profile Configuration window. See Device Profile Fields for Extension Mobility Cross Cluster, on page 426 for more information about the fields and their configuration options. Step 4 Click Save. Step 5 Add a directory number (DN) to the new device profile. Device Profile Fields for Extension Mobility Cross Cluster Table 35: Device Profile Settings Description Field Displays the product type to which this device profile applies. Product Type Displays the device protocol to which this device profile applies. Device Protocol Enter a unique name. This name can comprise up to 50 characters in length. Device Profile Name Enter a description of the device profile. For text, use anything that describes this particular user device profile. Description Specifies the audio source that plays when a user initiates a hold action, choose an audio source from the User Hold MOH Audio Source drop-down list. If you do not choose an audio source, Unified Communications Manager uses the audio source that is defined in the device pool or the system default if the device pool does not specify an audio source ID. Note You define audio sources in the Music On Hold Audio Source Configuration window. For access, choose Media Resources > Music On Hold Audio Source. User Hold MOH Audio Source From the drop-down list, choose the locale that is associated with the phone user interface. The user locale identifies a set of detailed information, including language and font, to support users. Unified Communications Manager makes this field available only for phone models that support localization. Note If no user locale is specified, Unified Communications Manager uses the user locale that is associated with the device pool. If the users require information to display (on the phone) in any language other than English, verify that the locale installer is installed before configuring user locale. See the Unified Communications Manager Locale Installer documentation. User Locale Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 426 Receiving Calls Device Profile Fields for Extension Mobility Cross Cluster