/mcpConfigure an Intercluster Service Profile for Extension Mobility Cross Cluster Configure the intercluster service profile to activate extension mobility cross cluster. The profile collects all the configuration that precedes and provides a results report. Procedure Step 1 From Cisco Unified CM Administration, choose Advance Features > EMCC > EMCC Intercluster Service Profile. Step 2 Configure the fields on the EMCC Intercluster Service Profile Configuration window. For more information on the fields and their configuration options, see Online Help. Step 3 If no failure messages appear in the popup window, click Save. Configure Remote Cluster Services Configure the remote cluster for extension mobility cross cluster. This step completes the link between the home cluster with remote (visiting) cluster. Procedure Step 1 From From Cisco Unified CM Administration, choose Advanced Features > Cluster View. Step 2 Click Find to show a list of known remote clusters. Step 3 Perform one of the following steps: • Click the remote cluster name and verify the fields if the remote cluster that you want to configure appears. • Click Add New if the remote cluster that you want to configure does not appear and configure the following fields: a. For the Cluster Id field, ensure that the ID matches the enterprise parameter value of the cluster ID of the other clusters. b. n the Fully Qualified Name field, enter the IP address of the remote cluster or a domain name that can resolve to any node on the remote cluster. c. Click Save. Note For extension mobility cross cluster, the TFTP check box should always be disabled. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 442 Receiving Calls Configure an Intercluster Service Profile for Extension Mobility Cross Cluster