/mcp• From Cisco Unified Communications Manager Release 9.0 onward, the Hunt Group Log Off feature enables the use of mobile device as a desk phone. When you use the Hlog softkey through your mobile client, you no longer receive calls that are placed to the hunt pilot. Hunt Group Prerequisites • The phones must be running Skinny Client Control Protocol (SCCP) or Session Initiation Protocol (SIP). • The phone ringtone file must be located in the TFTP directory (/usr/local/cm/tftp). Hunt Group Configuration Task Flow Before you begin • Review Hunt Group Prerequisites, on page 476 Procedure Purpose Command or Action Configure a softkey template for the HLog softkey. Configure a Softkey Template for Hunt Group, on page 477 Step 1 Optional. To make the softkey template available to phones, you must complete either To Associate a Softkey Template with a Common Device Configuration, on page 478, complete the following subtasks: Step 2 this step or the following step. Follow this step if your system uses a Common Device • Add a Softkey Template to a Common Device Configuration, on page 478 Configuration to apply configuration options to phones. This is the most commonly used • Associate a Common Device Configuration with a Phone, on page 479 method for making a softkey template available to phones. Optional. Use this procedure either as an alternative to associating the softkey template Associate a Softkey Template with a Phone, on page 479 Step 3 with the Common Device Configuration, or in conjunction with the Common Device Configuration. Use this procedure in conjunction with the Common Device Configuration if you need to assign a softkey template that overrides the assignment in the Common Device Configuration or any other default softkey assignment. Configure phones to automatically log in to or log out of hunt groups and hunt lists. Configure Phones for Hunt Group, on page 480 Step 4 Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 476 Receiving Calls Hunt Group Prerequisites