/mcpThe Alarm Configuration window updates with configuration fields. Step 6 Under Local Syslogs, check the Enable Alarm check box. Step 7 If you want to enable the alarm for all nodes in the cluster, check the Apply to All Nodes check box. Step 8 To turn on the informational alarm, click Update. Configure a Softkey Template for Malicious Call Identification Skinny Client Control Protocol (SCCP) IP phones use a softkey to invoke the MCID feature. Note Before you begin Configure Malicious Call ID Alarms, on page 485 Procedure Step 1 From Cisco Unified CM Administration, choose Device > Device Settings > Softkey Template. Step 2 Perform the following steps to create a new softkey template; otherwise, proceed to the next step. a) Click Add New. b) Select a default template and click Copy. c) Enter a new name for the template in the Softkey Template Name field. d) Click Save. Step 3 Perform the following steps to add softkeys to an existing template. a) Click Find and enter the search criteria. b) Select the required existing template. Step 4 Check the Default Softkey Template check box to designate this softkey template as the default softkey template. Note If you designate a softkey template as the default softkey template, you cannot delete it unless you first remove the default designation. Step 5 Choose Configure Softkey Layout from the Related Links drop-down list in the upper right corner and click Go. Step 6 In the Select a call state to configure field, choose Connected. The list of Unselected Softkeys changes to display the available softkeys for this call state. Step 7 In the Unselected Softkeys drop-down list, choose Toggle Malicious Call Trace (MCID). Step 8 From the Unselected Softkeys list, choose the softkey to add and click the right arrow to move the softkey to the Selected Softkeys list. Use the up and down arrows to change the position of the new softkey. Step 9 Click Save. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 486 Receiving Calls Configure a Softkey Template for Malicious Call Identification