McDewey

Configure Malicious Call Identification Button The procedures in this section describe how to configure the Malicious Call Identification button. Before you begin Configure Malicious Call ID Alarms, on page 485 Procedure Purpose Command or Action Perform this step to assign Malicious Call Identification button features to line or speed dial keys. Configure Malicious Call ID Phone Button Template, on page 489. Step 1 Perform this step to configure the Malicious Call Identification button for a phone. Associate a Button Template with a Phone , on page 490 Step 2 Configure Malicious Call ID Phone Button Template Before you begin Configure Malicious Call ID Alarms, on page 485 Procedure Step 1 From Cisco Unified CM Administration, choose Device > Device Settings > Phone Button Template. Step 2 Click Find to display list of supported phone templates. Step 3 Perform the following steps if you want to create a new phone button template; otherwise, proceed to the next step. a) Select a default template for the model of phone and click Copy. b) In the Phone Button Template Information field, enter a new name for the template. c) Click Save. Step 4 Perform the following steps if you want to add phone buttons to an existing template. a) Click Find and enter the search criteria. b) Choose an existing template. Step 5 From the Line drop-down list, choose feature that you want to add to the template. Step 6 Click Save. Step 7 Perform one of the following tasks: • Click Apply Config if you modified a template that is already associated with devices to restart the devices. • If you created a new softkey template, associate the template with the devices and then restart them. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 489 Receiving Calls Configure Malicious Call Identification Button